Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 46 for “"Heat spreader"”.
-
Single-Phase Hybrid Cooling and Integrated Fluidic Heat Spreader Solutions for Compact SiC Power Modules
… thermal conductivity can lead to excessive fluid heating near device junctions, shifting thermal constraints from the device to the coolant under high power density. Design limitations such as reduced layers and limited access for top-side fluid ports further exacerbate these challenges, …
-
THERMAL HYDRAULIC PERFORMANCE OF AN OSCILLATING HEAT PIPE FOR AXIAL HEAT TRANSFER AND AS A HEAT SPREADER
… a stacked double-layer flat plate oscillating heat pipe charged with degassed DI water was designed, fabricated and characterized under different operating conditions (orientation, system or cooling water temperature and heat load). The oscillating heat pipe was designed to dissipate 500 W …
-
Thin Two-Phase Heat Spreaders with Boiling Enhancement Microstructures for Thermal Management of Electronic Systems
… over a design methodology for thin, two-phase heat spreaders for space constrained cooling applications. The evaporator section of the heat spreader employs enhancement structures to improve the spreader plate performance. The thermal performances of two such spreader prototypes, with …
-
Electrical Breakdown of Thermal Spray Alumina Ceramic Applied to AlSiC Baseplates Used in Power Module Packaging
… copper (DBC) soldered to a nickel plated copper heat spreader. A coefficient of thermal expansion (CTE) mismatch exists between copper and alumina and leads to reliability issues that arise due to product failure during thermal cycling and lifetime operation. The substitution of an AlSiC metal …
-
Assessing Topside Thermal Solutions for Hot Spot Management of Micro-Scale Electronics
… of material is placed atop the device to spread heat away from the electronic component, effectively cooling it. (2) where said heat-spreader is also in contact with the device package (i.e., thermal ground). The simulations indicate that while scenario 2 is optimal, a thick heat-spreader is of …
-
Development and Evaluation of Active Thermal Management System for Lithium-Ion Batteries using Solid-State Thermoelectric Heat Pump and Heat Pipes with Electric Vehicular Applications
… systems are studied: (a) simple aluminum as heat spreader material, (b) heat pipes as heat spreader, and (c) advanced combined solid state thermoelectric heat pump (TE) and heat pipe system; these will be subsequently referred to as Design A, B and C, respectively. A detailed description of …
-
Investigation of a Novel Vapor Chamber for Efficient Heat Spreading and Removal for Power Electronics in Electric Vehicles
… investigated a novel vapor chamber for efficient heat spreading and heat removal. A vapor chamber acting as a heat spreader enables for more uniform temperature distribution along the surface of the device being cooled. First, a vapor chamber was studied and compared with the traditional copper …
-
Generative design algorithms in topology optimization of passive heat spreaders
… design is presented and a case study for passive heat spreaders is devised to demonstrate the execution of this framework. Topology optimization methods are now the state of the art for heat spreader design. These methods are introduced herein and are used to benchmark solutions obtained through …
-
Two-Phase Spray Cooling with Water/2-Propanol Binary Mixtures for High Heat Flux Focal Source
… thermal management technique offering high heat transfer coefficients and critical heat flux levels, near-uniform surface temperatures, and efficient coolant usage that enables to design of compact and lightweight systems. Due to these capabilities, spray cooling is a promising approach for …
-
Chemistry and interfacial mechanics of a phase change material on metal surfaces
IC packages are known to dissipate heat. Recently power dissipation in electronic devices has increased dramatically particularly in microprocessors. This trend is expected to continue in the future. While packages have gotten more thermally efficient and heat sinks have both increased in size and …
-
Thermal Design and Optimization for PCB Winding based High Frequency Planar Magnetics
… associated with these converters, including heat generation, temperature limitations, and cooling solutions, to improve their performance and reliability. In the first part of the study in chapter 2, the LLC resonant converter's thermal design is explored, focusing on heat spreader design and …
-
Performance and reliability of exhaust gas waste heat recovery units
… (steel, copper, Inconel, and ceramic) on heat recovery performance, exhaust side pressure drop, and temperature profile in the exhaust gas Waste Heat Recovery Unit (WHRU). Non-dimensional parametric studies of a selected counter-flow Water Jacket WHRU was conducted using analytical and …
-
Experimental investigation of oscillating heat pipes
… management. A radial flat-plate oscillating heat pipe (RFP-OHP) heat spreader is investigated to study the effect of central heating on the heat transport capability in an OHP. The investigated OHP has dimensions of 100 mm x 100 mm x 2.5 mm with central heating using a 30 mm x 30 mm heater. …
-
Microfabricated thin silicon vapor chambers for low profile thermal management
… chamber is a technology that utilizes the latent heat of liquid/vapor phase change of a working liquid for heat removal, and passive capillary action to return the condensed liquid to the heat source. The main goal of this study is to develop a submillimeter thick vapor chamber that can be …
-
Flat-plate oscillating heat pipes and thermal spreading analysis of heat spreaders
… channel and Tesla-type check valve - on the heat transport capability in a flat-plate oscillating heat pipe (FP-OHP) - have been investigated. Based on experimental results, it has been concluded that the three-dimensional channel configuration allows for the FP-OHP to operate more …
-
On-Chip Isotropic Microchannels for Cooling Three Dimensional Microprocessors
… oxide deposition. The micro-fin channels heat transfer characteristics are similar to previously published channel designs by being capable of removing 185 W/cm2 before the junction temperatures active elements exceed 85°C. To examine the heat transfer characteristics of this proposed …
-
Thermally Aware Design Approaches for High Power Density Ultra-Wide Bandgap Power Electronics
… will hinge upon novel approaches to address heat dissipation at the die level which will enable high power density operation. The aims of this thesis are i) to develop novel thermal management strategies to reduce the junction-to-package thermal resistance for devices made from low thermal …
-
Glass Based Packaging for Beyond 5G Communication
… die-embedded glass package incorporates a copper heat spreader on the PA's backside, significantly enhancing thermal management. Compared to current packaging solutions for state-of-the-art D-band modules, this approach offers superior electrical and thermal performance and assembly simplicity. …
-
Experimental and Numerical Analysis of a Commercial Phase Change Material Melting at Different Inclinations
… feasibility and potential when used in latent heat thermal energy storage (LHTES) systems for a variety of potential applications. Previous studies have investigated changes into the type of PCM used in the system as well as the system configuration, ranging from boundary conditions to internal …
-
Composite thermal capacitors for transient thermal management of multicore microprocessors
… of small, localized hotspots with very large heat fluxes due to the placement of asymmetric cores, heterogeneous devices and performance driven layouts. In this thesis, a new thermal management solution is introduced that seeks to maximize the performance of microprocessors with dynamically …
Page 1 of 3