Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"Heat spreading"”.
-
Enhanced Two-Phase Heat Spreading Enabled by Dropwise Condensation
… challenges for thermal management. Efficient heat spreading plays an important role in distributing high-density heat to the large-area heat sink and maintaining the junction temperature below the temperature limit during operation. Vapor chambers, a type of flat heat pipe utilizing two-phase …
-
Enhancing Two-Phase Heat Spreading: Development and Performance Evaluation of Hermetically Sealed Hybrid Heat Sinks
… management based on power density. To cool heat fluxes to this degree, conventional liquid-cooled heat sinks are utilized because air cooling becomes insufficient (>100 𝑊/𝑐𝑚2 ). This study introduces a hybrid heat sink that integrates liquid cooling with a dropwise-enhanced vapor chamber, …
-
Investigation of a Novel Vapor Chamber for Efficient Heat Spreading and Removal for Power Electronics in Electric Vehicles
… investigated a novel vapor chamber for efficient heat spreading and heat removal. A vapor chamber acting as a heat spreader enables for more uniform temperature distribution along the surface of the device being cooled. First, a vapor chamber was studied and compared with the traditional copper …
-
Analytical solutions of heat spreading resistance from a heat source on a finite substrate with isothermal or convective surfaces
… is to present the analytical solutions to the heat spreading problems that arise due to a flux specified circular heat source on a finite thickness substrate with isothermal or convective surfaces. The solutions to heat spreading resistance of these problems are obtained for the first time by …
-
Diamond-based heat spreaders for power electronic packaging applications
… need for materials that can sustain higher heat flux levels while safely integrating into the electronic package architecture. In such context, diamond is an attractive candidate because of its outstanding thermal conductivity, low thermal expansion, and high electrical resistivity. Its low …
-
Enhancing The Properties Of Copper Foam Wicks Using Graphene Coatings For High-Performance Vapor Chambers And Heat Pipes
… flow-driven structures (e.g., vapor chambers, heat pipes) in thermal management has grown exponentially. These structures utilize the latent heat of evaporation of a working fluid along with the thermal and capillary capabilities of a wick to efficiently mitigate hot spots through heat …
-
Electro-thermal Transport in Non-homogenous Network
… of time and spatial dependence of the local self-heating around NW-NW junctions. Hotspots arise from self-heating associated with applied bias and are spatially correlated with current pathways through the network. Moreover, these hotspots can potentially redistribute and/or turn off percolating …
-
The thermal effect of hexagonal boron nitride supports in graphene devices
… properties of traditional three-dimensional (3D) heat conducting materials such as the metal interconnects in nanoelectronic devices tend to degrade as the critical dimension is reduced. In contrast, the thermal properties of a new class of van der Waals-based two-dimensional (2D) materials can …
-
Direct bonding dissimilar optical materials
… the resulting bond’s limits, demonstrating the heat spreading benefits of a bonded diamond layer.
-
Vapor-chamber-based modular cold plate for TO-247 power semiconductor CFD setup, desgin & verification
… applications, but their highly localized heat fluxes create significant thermal management challenges. This work proposes a compact 13.5 × 18.95 mm² two-phase cold plate that integrates a vapor chamber (VC) with a liquid-cooled heat sink, designed specifically for fabrication via laser …
-
Thermal analysis of high power led arrays
… in high powered LED sources is the very large heat flux at the die level (100-500 W/cm2) which must be addressed in order to lower the operating temperature in the die. It is possible to address the spreading requirements of high powered LED die through the use of power electronic substrates …
-
Characterization of Devices and Materials for Gallium Nitride and Diamond Thermal Management Applications
… and photonic devices, the issue of self-heating becomes a prominent concern. This is especially the case for high-brightness light-emitting diodes (LEDs) and high electron mobility transistors (HEMTs), where the bulk of power dissipation occurs within a small (sub-micron) region resulting …
-
THERMAL HYDRAULIC PERFORMANCE OF AN OSCILLATING HEAT PIPE FOR AXIAL HEAT TRANSFER AND AS A HEAT SPREADER
… a stacked double-layer flat plate oscillating heat pipe charged with degassed DI water was designed, fabricated and characterized under different operating conditions (orientation, system or cooling water temperature and heat load). The oscillating heat pipe was designed to dissipate 500 W …
-
Development of organic thermoelectric materials and devices for energy harvesting
… to conventional flat-plate TEGs. By using heat spreading, the device could operate under natural convection, thereby eliminating the need for active cooling, which reduces system cost. In the second design, a close-packed layout is presented that enables thin film TEGs with a high fill …
-
Assessing polymeric nanocomposites and advanced cooling techniques for thermal management of next-generation power electronics
… to dissipate ultrahigh high and concentrated heat loads. Multiple advanced thermal management solutions such as liquid cooling, jet, and spray impingement have been proposed as potential solutions. The present dissertation quantifies the benefits of key advanced cooling techniques for thermal …
-
A New Steady State Analytical Thermal Modelling Method for High Power Density Power Module Design – The Fourier Series Thermal Model for Multi-layer Structures with Various Longitudinal and Lateral Dimensions
… make reasonable structural simplification, the heat spreading characteristics of the power modules are studied. Based on the findings, the example SEMIKRON power module is simplified to a multi-layer structure with regular rectangular layers which have various longitudinal and lateral …
-
Optimising heat flow in wide and ultra-wide bandgap devices: The applications of diamond
… that must be managed, making innovative heat extraction techniques vital. In this work, heat flow and diamond heat spreading solutions are studied in novel device designs fabricated in GaN, AlGaN, and β−Ga2O3 to ensure that these materials can be utilised to their full potential. …
-
Single-Phase Hybrid Cooling and Integrated Fluidic Heat Spreader Solutions for Compact SiC Power Modules
… thermal conductivity can lead to excessive fluid heating near device junctions, shifting thermal constraints from the device to the coolant under high power density. Design limitations such as reduced layers and limited access for top-side fluid ports further exacerbate these challenges, …
-
Experimental and theoretical investigations of thermal transport in graphene
… on a triple scan technique and another zero heat flux measurement method, the temperature rise in flexible devices is found to be higher by more than one order of magnitude, and shows much more significant lateral heat spreading than graphene devices fabricated on silicon.
Page 1 of 2