Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Heavy water reactors"”.
-
Low Enriched Uranium Fuel Cycle in Heavy Water Reactors
<p>Heavy water moderated thermal nuclear fission reactors have a greater inherent neutron economy than light water or graphite moderated reactor designs. Consequently, such units, operating on a variety of fuel cycles, may play an ever-increasing role in meeting future global energy demands. This …
-
An evaluation of the net breeding capability of heterogeneously-fuelled pressure-tube heavy water reactors with the thorium fuel cycle
… for an alternative to uranium. The pressure tube heavy water reactor (PT-HWR) has for decades been considered capable of achieving net breeding on the thorium fuel cycle, but this capability has not been conclusively demonstrated. The goal of this work was to perform reactor physics modelling of …
-
Special isotopes of the FUGEN nuclear reactor
… of interest in decommissioning similarly styled heavy water reactors. This research examines the quantity of the isotopes that are of interest to the decommissioning of both the FUGEN nuclear power plant in Japan and the Pickering nuclear power plant in Canada and makes a comparison between them. …
-
Optimization of a GEM-based detector to measure tritium and discriminate against other radiation types
… its fleet of Canadian Deuterium Uranium (CANDU) heavy water reactors. Although it is a less penetrative radionuclide, tritium is shown to have a detrimental effect on the human body when ingested, inhaled or absorbed. GEM detectors have proven to be very useful in the detection of low energy …
-
Investigation of a SPH-based sub-cell homogenization for PHWR using a multi-cell model
… that single-cell SPH applied to Pressurized Heavy Water Reactors (PHWR) yields virtually no improvement compared to single-cell standard homogenization. This work attempts to improve those results by accounting for neutron leakage across cell boundaries by performing SPH-based homogenization …
-
Improved 3D modelling of CANDU reactors using transport-fitted diffusion coefficients
… behavior of the core in CANDU pressure tube type heavy water reactors with natural-uranium fuel, two levels of calculations are required. Initially, lattice-level transport calculations are carried out to obtain, with high detail and accuracy, the flux distribution inside the lattice cell and …
-
Lattice Strain and Texture of Plastically Deformed Zircaloy-2 at 77K
… material for the reactor core in both light and heavy water reactors. The intergranular strains and texture greatly affect the mechanical properties of the material while in operation. Understanding the plastic deformation of Zircaloy-2 will improve on current plastic deformation models, …
-
SIMULATION OF LARGE STRAIN BEHAVIOUR OF ZICONIUM-2 ALLOY
… structural material used as pressure tubes in heavy water reactors, and thin-walled tubing in light water reactors due to improved corrosion resistance. To study the special property of zirconium, this thesis will evaluate different numerical models and will present an overview about the …
-
Investigation of sub-cell homogenization for PHWR lattice cells using superhomogenization factors
… neutronics calculations for Pressurized Heavy-Water Reactors (PHWRs) are usually performed in diffusion theory using an approximate core model, whereby only two energy groups are utilized and two-group neutronic properties (i.e. macroscopic cross sections and diffusion coefficients) are …
-
Modeling Pa-233 Generation in Thorium-Fueled Reactors for Safeguards
… different reactor designs including pressurized water reactors (PWRs), pressurized heavy water reactors (PHWRs), and molten salt reactors (MSRs). Its abundance in the earth, decreased long-lived transuranic waste, and claims that there are fewer proliferation concerns contribute to the …
-
Assessment of the impact of fueling machine failure on the safety of CANDU-PHWR
… (Canadian Deuterium Uranium-Pressurized Heavy Water Reactors) has been conducted covering both direct and indirect initiators. Among the 22 initiating events that were surveyed in this study, four direct initiators have been selected and analyzed briefly. Those selected were a pump …
-
Lattice Strain and Texture Evolution During Room-Temperature Deformation in Zircaloy-2
… in the nuclear industry as core components in heavy water reactors and fuel cladding in both heavy and light water reactors. Intergranular stresses and texture can greatly affect the mechanical performance of these components. A complete understanding of the development of intergranular …
-
Microstructural Evolution in ZR and ZR Alloy Excel Under Ion Irradiation
… have been used extensively in both light and heavy water reactors where neutron irradiation is known to cause microstructural evolution, leading to degradation of mechanical properties and dimensional instabilities. Dimensional instabilities due to irradiation growth are particularly crucial …
-
An economical method for the determination of group constants for reactor lattices
… function is utilized for treating light water moderated systems, and the Honeck amplitude function relates to heavy water moderated systems. The group constants calculated with the economical model have been benchmarked with those computed by the VIM Monte Carlo code. The values obtained …
-
Spatio-temporal probabilistic methodology to estimate location-specific loss-of-coolant accident frequencies for risk-informed analysis of nuclear power plants
… for the piping components of Pressurized Heavy Water Reactors (PHWR); however due to the underlying assumptions of the methodology, this study does not adequately provide explicit incorporation of physical factors associated with locations. The Spatio-Temporal probabilistic methodology is …