Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"Helium Injection"”.
-
Experimental investigation of helium injection at a low downstream angle into supersonic flow
Experiments were performed with single, sonic, helium jets at downstream angles of 15° and 30° relative to the free stream to determine their mixing, penetration and total pressure loss when injected into a supersonic air cross flow. From this information, the performance of these jets as fuel …
-
Experimental and computational investigation of helium injection into air at supersonic and hypersonic speeds
Experiments were performed with two different helium injector models at different injector transverse and yaw angles in order to determine the mixing rate and core penetration of the injectant and the flow field total pressure losses. when gaseous injection occurs into a supersonic freestream. …
-
Effect of transpiration cooling on boundary layer transition for hypersonic flight
… a 7-degree half-angle cone model. Coolant gas injection is performed at two locations on the model. Firstly, fully porous nose tips with 1 mm nose radius and 58.5 mm axial length are used. Secondly, helium, nitrogen, argon and carbon dioxide are injected through a small segment in the frustum, …
-
Combined free and forced convection mass transfer from a cylindrical cavity
… transfer experiments were conducted employing a helium injection technique to simulate the convection heat transfer losses from a cylindrical cavity located in a uniform flow. The results were correlated to account for the dependence of the mass transfer on free stream velocity and direction and …
-
Fuel-vortex interactions for enhanced mixing in supersonic flow
… a Reynolds number of 3.63 x 10⁷ per meter and helium injection with jet-to-freestream momentum flux ratios of 1.0 and 2.0. Planar-laser Rayleigh scattering and conventional probing techniques including species composition sampling were employed to interrogate the flow field at several …
-
A study of the interaction between an underexpanded normal jet and a hypersonic free stream
… tunnel centre-line. One model was used for slot injection and the other for axisymmetric injection. Free stream conditions were held constant while the jet stagnation pressure, injectant gas type, sonic nozzle area and, for axisymmetric injection, nozzle exit Mach number were varied. Test …
-
The application of transpiration cooling as a thermal protection system for hypersonic vehicles
… a flight trajectory. Transpiration cooling using helium coolant has been applied to a wing leading edge with an aluminium substructure. Carbon–carbon ceramic composite and the Ultra-High-Temperature Ceramic (UHTC) zirconium diboride (ZrB2) were chosen as candidate materials. The substructure …
-
FLOW INDUCED CAVITY RESONANCE FOR TURBULENT COMPRESSIBLE MIXING ENHANCEMENT IN SCRAMJETS
… modify the mixing enhancement rate. Further, helium injection studies were conducted to gain qualitative assessment of the effect of cavity resonance on mixing.
-
Experimental investigation of normal, sonic injection through a wedge-shaped nozzle into supersonic flow
An experimental evaluation of normal, sonic, helium injection from a wedgeshaped nozzle and a circular nozzle into a Mach 3 free stream with a total pressure of 6.5 atm and a total temperature of 294 K was conducted. The expansion ratio and the mass rate of flow of both nozzles were matched in …
-
Mean-flow measurements of a turbulent mixing layer from helium slot injection into a supersonic airstream
… the mixing in a shear layer developed from helium slot injection into a parallel supersonic airstream and compares the results to those of previous slot-injection tests. The objectives of this study include documenting the helium slot-injection flowfield; providing a baseline for use as a …
-
Multiphase Flow in Coal: Insights from Multiscale Experiments and Multimodal Imaging
… (micro-CT) maps coal fracture structures, while helium injection into water-saturated samples simulates gas-water flow for permeability estimation. Real-time positron emission tomography (PET) captures dynamic displacement, and multi-scale image analysis overlays fluid flow onto fracture …
-
Oscillating shock impingement on low-angle gas injection into a supersonic flow
… on a 15° downstream angled, underexpanded, sonic helium jet injected into a supersonic airflow. Information on mixing, penetration, total pressure loss and turbulence structure from these experiments was used to estimate mixing control achieved by adding an oscillating shock to the helium …
-
A mach 1.95 free-jet facility for experimental investigation of injectant flow patterns
… were evaluated in the facility. Normal, sonic injection of helium through a circular injector was studied as a way to evaluate nanoshadowgraph photography, oil flow photography, and infrared imaging as qualitative flow visualization methods. Quantitative measurements of the local helium …
-
Experimental Investigation of a Flush-Walled, Diamond-Shaped Fuel Injector for High Mach Number Scramjets
… from the wall. Test conditions involved sonic injection of helium heated to approximately 313 K into a nominal Mach 4.0 crossstream airflow. These conditions are typical of a scramjet engine for a Mach 10 flight, and heated helium was used to safely simulate hydrogen fuel. The injector was …
-
Application of transpiration cooling on hypersonic vehicles to mitigate material oxidation
… freestream oxygen through boundary layer mass injection.</p> <p>A novel pressure sensitive paint diagnostic is developed in this work to measure the concentration of molecular oxygen on a transpiration cooled surface. This is a fundamental tool to quantify the ability of the coolant film to act …