Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Helium bubble"”.
-
KMC modeling of helium bubble clustering and evolution in BCC iron
The effect of helium in iron is an important issue in nuclear systems, as iron and iron alloys (steels) are the primary materials used for structural elements. Helium is known to cause embrittlement and decrease fatigue life, as well as aid creep and promote swelling. These effects can …
-
A Study of Helium Bubble Formation by Single and Dual Ion Implantation
Helium bubble formation in materials is a concern for both modern day nuclear reactors as well as the next generation. Helium trapped in an atomic lattice has a tendency to form bubbles that may cause blisters, flaking, and increased porosity on the surface of a material. For this experiment a 10 …
-
Helium Bubble Evolution In Nano-Infiltrated Transient Eutectic SiC Utilizing Machine Learning Analysis
… Micrographs taken of samples implanted with helium bubbles can have thousands of microscopic features that need to be annotated. This large amount of data and human error are a limiting factor on data analysis in the nuclear materials science field. Many machine learning (ML) model approaches …
-
Void and Helium Bubble Stability in Amorphous Silicon Subjected to Heavy Ion Irradiation
Made available in DSpace on 2017-07-06T18:55:41Z (GMT). No. of bitstreams: 3 Okuniewski_Maria_A_MS.pdf: 82892848 bytes, checksum: 0e8165f7f8e7b43f30278739ac8c88a1 (MD5) Okuniewski_Maria_A_MS_ABS.pdf: 1807599 bytes, checksum: 56e56e0bdcdb4af9e49619bba6b03555 (MD5) license.txt: 4813 bytes, checksum: …
-
Modeling Radiation Damage in Nanostructured Ferritic Alloys: Helium Bubble Precipitation on Oxide Nanofeatures
… act as alternative nucleation sites for bubbles of transmutation He, thus preventing the accumulation of He atoms at the grain boundaries which would embrittle the metal. To further study the material, a mean-field rate theory model (MF-RTM) was created to simulate the radiation-induced …
-
Smoke and helium bubble visualization studies of incompressible flow past a jet-flap airfoil
… technique. thee techniques are smoke flow and helium bubble flow. The study was conducted using various tunnel speeds and blowing rates of the jet flap. The varying of these parameters and the complexity of the jet flap flow allowed for an excellent evaluation of the best facility and the two …
-
Flow visualization of the airwake around a model of a TARAWA class LHA in a simulated atmospheric boundary layer
… conducted using the environmental wind tunnel. Helium bubble flow visualization techniques were employed and a photographic record made of the results. The study utilized a 1:205 scale wooden model of the LHA, suitably mounted to a motion simulator able to fix various combinations of pitch, roll …
-
Visualization of the flow field around an oscillating model of the USS Enterprise (CVN-65) in a simulated atmospheric boundary layer
… results is included in this report. Both the helium bubble and fluorescent minituft methods of flow visualization yielded excellent results and recommendations for follow-on studies are suggested.
-
FLOW VISUALIZATION OF TWO-PHASE FLOW IN MOLTEN-SALT: HELIUM BUBBLING IN LITHIUM FLUORIDE - SODIUM FLUORIDE - POTASSIUM FLUORIDE (LIF- NAF- KF)
… to conduct visualization experiments of single helium bubbles rising in fluoride salt within a temperature range of 460 – 650 °C. The fluoride-salt chosen for this research was a eutectic mixture of LiF- NaF-KF (46.5-11.5-42%), also known as FLiNaK. A set of helium bubble tests were conducted at …
-
Flow visualization of the airwake around a model of a DD-963 class destroyer in a simulated atmospheric boundary layer
… deck of the DD-963 in a stationary mode, using helium bubble, smoke, photographic and video equipment. The results show that the primary variable in the airwake is the yaw angle of the ship; pitch and roll having a lesser influence. Some highly complex flow patterns have been observed above the …
-
An experimental investigation of interacting wing-tip vortex pairs
… two rectangular wings have been studied through helium bubble flow visualizations and extensive hot wire velocity measurements made between 10 and 30 chord lengths downstream. The wings were placed tip to tip at equal and opposite angles of attack, generating pairs of co-rotating and counter …
-
The irradiation resistance of oxide dispersion strengthened steels
… of the alloy and provide trapping sites for helium gas. </p> <p>The use of these particles to sequester helium is of particular significance in the development of a structural ODS steel for fusion reactor systems. A fusion power reactor, based on the ITER design, is expected to produce over …
-
A wind tunnel investigation of a wing-tip trailing vortex
… found to be well developed by 10 chordlengths. Helium bubble flow visualization was used to study the development of the vortex in the near-tip regions. Hot-wire anemometry was used to study the vortex at 10 chordlengths. Two vortices were found in the tip-flow studies, a primary vortex core …
-
Discovering Key Unknowns for Tungsten-Hydrogen-Helium Plasma Material Interactions Using Molecular Dynamics
… geometry was modeled to study the diffusion of helium in nanotendrils and its relation to fuzz growth. The tendrils remain stable throughout the simulation and a modified helium release mechanism is found that allows the helium retention to reach a steady state within the tendril. The helium …
-
Dynamic Insight into Radiation-Induced Defect Accommodation in Pure Metals and Refractory Alloys
… dilute counterparts, showing suppression of helium bubble agglomeration and modified dislocation evolution mechanisms driven by solute interactions. In situ experiments demonstrate that chemical complexity modifies dislocation loop mobility, size distribution, and stability, with direct …
-
Ion Irradiation-induced Microstructural Change in SiC
… project was to advance the understanding of gas bubble formation mechanisms under irradiation conditions in SiC. In this work, microstructural evolution induced by helium implantation and ion irradiation was investigated in single crystal and NE SiC. Elastic recoil detection analysis confirmed …
-
Feasibility of Friction Stir Processing (FSP) as a Method of Healing Cracks in Irradiated 304L Stainless Steels
… (SCC) and are in need of repair. Additionally, helium has formed interstitially as a byproduct of proton bombardment. Current repair technology, such as TIG welding, puts extreme amounts of heat into the material and allows for interstitial helium atoms to aggregate and form bubbles/voids at …
-
Enhanced Radiation Tolerance in Sputtered Cu/V Multilayers
… Cu/V multilayers are subjected to helium (He) ion irradiation at room temperature with a peak dose of 6 displacements per atom (dpa). The average helium bubble density and lattice expansion induced by radiation decrease significantly with decreasing h, where h is individual layer …
-
The Development and Control of Axial Vortices over Swept Wings
… vortex interactions were investigated with helium bubble flow visualization in the VPI Stability Tunnel.
Page 1 of 2