Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Helium bubbles"”.
-
Automated Detection of Helium Bubbles in Inconel X-750 and Modeling Their Effect on its Mechanical Properties
… neural network is adapted to detect helium bubbles in micrographs of neutron-irradiated Inconel X-750 reactor spacer springs. This neural network produces analyses of similar accuracy and reproducibility to that produced by humans. Further, this method is shown as being four orders of …
-
The use of in-situ ion-irradiation/TEM techniques to study radiation damage in SiC
… neutrons in combination with a build-up of helium (from both transmutation reactions and by direct implantation). These processes have been simulated by in-situ ion-irradiation / TEM at the MIAMI and JANNuS facilities.This thesis contains the results of experiments which investigated the …
-
Flow visualization of the airwake of an oscillating generic ship model
… techniques utilized were neutral density helium bubbles and a liquid aerosol, each technique providing varying degrees of on-body and off-body analysis. Limited success was achieved with the aerosol, but the helium bubbles produced excellent photographic results and an accurate …
-
Discovering Key Unknowns for Tungsten-Hydrogen-Helium Plasma Material Interactions Using Molecular Dynamics
… geometry was modeled to study the diffusion of helium in nanotendrils and its relation to fuzz growth. The tendrils remain stable throughout the simulation and a modified helium release mechanism is found that allows the helium retention to reach a steady state within the tendril. The helium …
-
Investigations on Hydrocyclones for the Spallation Neutron Source
… performance in the application of separation of helium bubbles larger than 30 micron in diameter from liquid mercury at system pressure near 1 bar. The application is related to high power liquid metal target development for proton beams used in spallation neutron sources.</p>
-
Deciphering the Underlying Physical Processes Responsible for Synergistic Interactions Between Hydrogen and Noble Gases in Materials under Fusion Relevant Conditions
… fusion relevant conditions. The formation of He bubbles within plasma-facing components is a common phenomena that is expected to occur in the structural materials and first-wall, as well as the divertor, and is has been shown to strongly modify the retention properties for hydrogen of these …
-
Flow visualization on a small scale/
… were developed, including fog injection, helium bubbles, and smoke wire. In addition to velocity calibration and test section mapping of the tunnel, the latter two of these methods were used for visualizing flows around three different shaped bodies as demonstration that the tunnel's …
-
Light emitting processes in sonoluminescence
… and ion-atom association radiation in helium, are considered and their relative importance is discussed. We argue that processes involving strictly neutral species, e.g., collision-induced emission, are most likely insignificant for the continuum emission of SBSL. However, we include …
-
FLOW VISUALIZATION OF TWO-PHASE FLOW IN MOLTEN-SALT: HELIUM BUBBLING IN LITHIUM FLUORIDE - SODIUM FLUORIDE - POTASSIUM FLUORIDE (LIF- NAF- KF)
… to conduct visualization experiments of single helium bubbles rising in fluoride salt within a temperature range of 460 – 650 °C. The fluoride-salt chosen for this research was a eutectic mixture of LiF- NaF-KF (46.5-11.5-42%), also known as FLiNaK. A set of helium bubble tests were conducted at …
-
Ion Irradiation-induced Microstructural Change in SiC
… this work, microstructural evolution induced by helium implantation and ion irradiation was investigated in single crystal and NE SiC. Elastic recoil detection analysis confirmed that the as-implanted helium depth profile did not change under irradiation to 30 dpa at 700 °C. Helium bubbles were …
-
A Study of Helium Bubble Formation by Single and Dual Ion Implantation
Helium bubble formation in materials is a concern for both modern day nuclear reactors as well as the next generation. Helium trapped in an atomic lattice has a tendency to form bubbles that may cause blisters, flaking, and increased porosity on the surface of a material. For this experiment a 10 …
-
First-principles calculations of helium cluster formation in palladium tritides
The accumulation of helium atoms in metals or metal tritides is known to result in the formation of helium bubbles in the lattice and to cause degradation of the material. Helium is introduced either through neutron transmutation reaction or via the radioactive decay of tritium. We have performed …
-
The Effects of Irradiation on Inconel X-750
… radiation damage and the internal production of helium and hydrogen. In recent years, it has been observed these spacers are losing ductility and strength following irradiation. The mechanical property evolution of these components is dependent on the irradiation temperature and dose. The primary …
-
The Solubility and Diffusivity of Helium in Mercury with Respect to Applications at the Spallation Neutron Source
… and evaluated for the combination of mercury and helium for applications at the Spallation Nuetron Source (SNS) at Oak Ridge National Laboratory (ORNL). Gas solubility in mercury is acknowledged to be very low; therefore, mercury has been used in ASTM standard methods as a blocking media for gas …
-
Design and Testing of a Bubble Generator for Molten Salt Surrogate Fluid
… Morton number defined by the properties of the helium bubbles in the pump bowl of the Molten Salt Reactor Experiment (MSRE). The injector, constructed from polydimethylsiloxane (PDMS) and acrylic, was tested to generate bubbles within a precise size range suitable for simulating conditions in …
-
A performance and visualization study on inlet geometries of a cross-flow fan.
… system used was developed by the author and uses helium bubbles as tracers, an LED light sheet, a slow motion camera, and a Matlab program. Four inlet geometry design variables were defined and independently studied to evaluate the effect on fan performance. The flow visualization results showed …
-
A study of the airwake aerodynamics over the flight deck of an AOR model ship
… four-foot model in a stationary mode, utilizing helium bubbles, smoke, photographic and video equipment. The results show that the airwake is usually made up of two regions, one that is relatively smooth and one that is extremely turbulent. The dividing line is a shear layer that is created from …
-
Fluid-structure interaction of a tornado-like vortex with low-rise structures
… to the reported averages for the moving test. Helium bubbles and a "smoke" were used to visualize the flow. A single-celled vortex and a two-celled vortex were identified in the center of the simulator. As the swirl ratio increased, the size of the vortex became larger. It is not readily …
-
Helium Bubble Evolution In Nano-Infiltrated Transient Eutectic SiC Utilizing Machine Learning Analysis
… Micrographs taken of samples implanted with helium bubbles can have thousands of microscopic features that need to be annotated. This large amount of data and human error are a limiting factor on data analysis in the nuclear materials science field. Many machine learning (ML) model approaches …
-
Permeation and Thermal Desorption Studies of Deuterium Diffusion and Trapping in Ion-Implanted Nickel
… reactors, as well as by the need for minimizing helium "ash" in the plasma. Major attention was given to the study of relationships between helium defect configuration and deuterium diffusion and trapping behavior.</p> <p>Permeation results show that crystalline defects such as dislocation loops …
Page 1 of 2