Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Helium-cooled"”.
-
Thermal Performance of Helium-cooled Divertors for Magnetic Fusion Applications
The heat transfer performance of the Helium-cooled Multi-jet (HEMJ) divertor was investigated. The HEMJ design uses impinging jets to significantly enhance its heat transfer capability. The convective heat transfer coefficient predicted by computational fluid dynamics software packages is on the …
-
Thermo-Fluids Perfromance of Helium Cooled Divertors Emphasizing Plate-Type Concepts
… fluxes of at least 10 MW/m^2, must therefore be cooled so that they do not melt and contaminate the plasma. In addition, about 20% of the total energy produced by the fusion reaction is absorbed by plasma facing surfaces including the divertor targets, and therefore it is important to have a …
-
Polyimide/silicon dioxide nanocomposites as dielectrics for helium-cooled high-temperature superconducting cables
… of a nanocomposite for use as a dielectric on helium-cooled high-temperature superconducting (HTS) cables. Further, a cryogenic chamber was designed with the intent of cooling samples to 40 K for dielectric and thermal contraction testing. Composites were created through an in situ process …
-
CFD Modeling and Simulation of Natural Circulation in Helium- Cooled Very High Temperature Reactors
… behavior of natural circulation in helium-cooled Very High Temperature Reactor (VHTR) systems, focusing on the performance and validation of passive safety features under Pressurized or Depressurized Loss of Forced Cooling (P-LOFC or D-LOFC) events. An experimental facility inspired …
-
Optimization of the thermal-hydraulic performance of the helium-cooled modular divertor with multiple jets
… that helps sustain fusion reactions by removing helium ash particles and impurities from the core plasma. The divertor target plates are therefore subject to high steady-state incident heat fluxes, expected to be at least 10 MW/m^2 in the international demonstration (DEMO) fusion reactor. The …
-
INVESTIGATION OF POLYMER NANOCOMPOSITES WITH SILICON DIOXIDE FILLERS AS HELIUM COOLED HIGH-TEMPERATURE SUPERCONDUCTING CABLE DIELECTRICS
… fabricated for investigation as dielectrics in helium-cooled high-temperature superconducting (HTS) cables. Polyimide, polyamide, and polymethyl methacrylate are utilized as host polymers. The composite samples are synthesized through an in situ process, dispersing silicon dioxide nanoparticles …
-
Investigation of a helium-cooled modular divertor with multiple jets using a reversed heat flux approach
… from the core plasma. This thesis focuses on the helium-cooled modular divertor with multiple jets (HEMJ) design. An HEMJ module employs an array of impinging jets to cool the inner surface of an endcap brazed to the plasma-facing surface, a tungsten tile. Originally proposed for the European …
-
On the use of dynamically similar experiments to evaluate the thermal performance of helium-cooled tungsten divertors
… least 10 MW/m^2 during normal operation. Modular helium-cooled tungsten divertors are one of the leading divertor designs for future commercial fusion reactors, and a number of different candidates have been proposed including the modular He-cooled divertor concept with pin array (HEMP), the …
-
Advanced Fuels Modeling: Evaluating the Steady-State Performance of Carbide Fuel in Helium-Cooled Reactors Using FRAPCON 3.4
… fuel, especially in the context of Gen IV gas-cooled reactors. It has shown promise because of its high uranium density, good irradiation stability, and especially high thermal conductivity. Despite its many benefits, UC is known to swell at a rate twice that of UO2. However, the swelling …
-
Fuel Cycle Optimization of a Helium-Cooled, Sub-Critical, Fast Transmutation of Waste Reactor with a Fusion Neutron Source
Possible fuel cycle scenarios for a helium-cooled, sub-critical, fast reactor with a fusion neutron source for the transmutation of spent nuclear fuel have been analyzed. The transmutation rate was set by the 3000MWth fission power output. The primary objective was to achieve greater than 90% burn …
-
Thermal performance of gas-cooled divertors
… expected at steady-state operating conditions. Helium cooling of the divertors is one of the most effective ways to accommodate such a heat load. Several helium-cooled divertor designs have been proposed and/or studied during the past decade including the T-Tube divertor, the helium-cooled flat …
-
Advanced simulation and design of gas-cooled solid tungsten divertor systems
… predict the performance and safety of a modular, helium-cooled, solid tungsten (W) T-tube divertor concept. The methodology integrates thermal-transport computational fluid dynamics (CFD) simulations with thermal-structural finite-element methods (FEM) models. These models uniquely incorporate …
-
USING COMPUTATIONAL METHODS TO OPTIMIZE HIGH HEAT FLUX COMPONENT THERMAL PERFORMANCE IN MAGNETIC CONFINEMENT FUSION REACTOR RESEARCH
… and analyzing test sections supporting a helium flow loop assembled at Oak Ridge National Laboratory to analyze heat transfer enhancement for systems such as blanket and divertor components. This initial phase uses STAR-CCM+ to study a base set of literature-supported helium-cooled ribbed …
-
Measurement of the electrical and optical properties of Thermid polymide
… lamp, a lamellar grating, and a dip-stick helium-cooled bolometer. The transmission spectrum for the wave number range of 10-60 cm<sup>-1</sup> was obtained using a test system consisting of a Synchrotron far infrared light source, a Nicolet Michelson scanning spectrometer, and a pumped …
-
Modularity of the MIT Pebble Bed Reactor for use by the commercial power industry
… Pebble Bed Reactor is a small high temperature helium cooled reactor that is being considered for both electric power and hydrogen production. Pebble bed reactors are being developed in South Africa, China and the US. To make smaller 120 Mwe reactors economically competitive with larger 1500 Mwe …
-
Experimental and numerical investigation of the thermal performance of gas-cooled divertor modules
… order to enhance the overall thermal efficiency. Helium is the leading coolant because of its high thermal conductivity, material compatibility, and suitability as a working fluid for power conversion systems using a closed high temperature Brayton cycle. Peak surface heat fluxes on the order of …
-
Far infrared fourier transform spectroscopy using ring interferometer
… work as expected. In addition, a "home made" helium cooled detector was used in the experiment. A data acquisition and control system based on the WB-31 white box was also set-up and worked well. The Fourier transform spectroscopy was briefly reviewed in the thesis.
-
Tritium Inventory Analysis for an Inertial Confinement Fusion Power Plant
… to evaluate fuel sustainability and safety in a helium-cooled pebble bed (HCPB) breeding blanket configuration. Tritium generation within the HCPB is modeled based on neutron interactions in the blanket, after which a system-level model tracks its movement through major plant subsystems. Using …
-
COLOR EVOLUTION IN HIGH REDSHIFT GALAXIES (INSTRUMENTATION, INFRARED, PHOTOMETRY).
… (K). The H and K bands are detected by liquid helium cooled InSb diodes. I(B) is detected by a helium cooled Si diode, and V(B) by an uncooled EMI 9658R photomultiplier tube. The instrument response function (IRF) including the effect of atmospheric transmission is shown. The maximum usable …
-
Multidisciplinary fusion engineering
… to the two main plant candidates, namely the helium-cooled pebble bed (HCPB) and the water-cooled lithium-lead (WCLL) configurations. Analytical and operational uncertainties were itemized referring to completed, ongoing and planned verification and validation activities, aiming to assess the …
Page 1 of 3