Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"High Efficiency Power Amplifier"”.

  1. A high-efficiency power amplifier integrated with a planar transmitting antenna.

    … is studied for the purpose of integration with a high efficiency power amplifier. A high efficiency power amplifier is designed via experimental determination of the loads required at the output of a transistor in order to maximise its efficiency. For this purpose, an active multi-harmonic …

    ottawa-retro Repository record for A high-efficiency power amplifier integrated with a planar transmitting antenna. (opens in a new tab)

  2. Large signal model development and high efficiency power amplifier design in cmos technology for millimeter-wave applications

    … CMOS transistors used in millimeter-wave CMOS power amplifiers. The large signal model presented in this work is classified as an empirical compact device model which incorporates temperature-dependency and device periphery scaling. These added features allow for efficient design of multi-stage …

    gatech Repository record for Large signal model development and high efficiency power amplifier design in cmos technology for millimeter-wave applications (opens in a new tab)

  3. Class F Power Amplifier and Doherty Power Amplifier Design

    … goal of this thesis is to design and fabricate a power amplifier suitable for entry in IMS 2023 High Efficiency Power Amplifier Student Design Competition. Power amplifier design requires multiple design tradeoffs, for example, efficiency and linearity are the two main conflicting design …

    calpoly Repository record for Class F Power Amplifier and Doherty Power Amplifier Design (opens in a new tab)

  4. Efficiency Enhancement of Base Station Power Amplifiers Using Doherty Technique

    The power amplifiers are typically the most power-consuming block in wireless communication systems. Spectrum is expensive, and newer technologies demand transmission of maximum amount of data with minimum spectrum usage. This requires sophisticated modulation techniques, leading to wide, dynamic …

    vt Repository record for Efficiency Enhancement of Base Station Power Amplifiers Using Doherty Technique (opens in a new tab)

  5. Class E GaN Power Amplifier Design for WiMAX Base Stations

    … systems transmit complex modulated signals with high peak to average ratio in order to deliver high data rates. It demands wide bandwidth and rigorous efficiency performance for power amplifiers. Today’s conventional RF power amplifiers have relatively poor operating efficiency and require more …

    ottawa-retro Repository record for Class E GaN Power Amplifier Design for WiMAX Base Stations (opens in a new tab)

  6. Analytical Modeling and Design of High-Efficiency Input-Output Harmonic Tuned Microwave Power Amplifiers

    High efficiency power amplifier (PA) is an integral part of an efficient radio frequency (RF) transmitting system design. To enable modern and future wireless communication systems, the quest for efficient, wideband, and linear PA design techniques is ongoing. To cope with the stringent and …

    calgary Repository record for Analytical Modeling and Design of High-Efficiency Input-Output Harmonic Tuned Microwave Power Amplifiers (opens in a new tab)

  7. Investigation into the use of high-efficiency switched-mode class E power amplifiers for high-dynamic range pulse-mode applications

    … a portion of time. These systems commonly use a power amplifier in the transmitter to raise the power level of the transmitted signal to a value sufficient to meet system sensitivity requirements. In high-dynamic range systems, the power amplifier pulse must turn off at a rate compatible with the …

    unm Repository record for Investigation into the use of high-efficiency switched-mode class E power amplifiers for high-dynamic range pulse-mode applications (opens in a new tab)

  8. Low Power Reconfigurable Microwave Circuts Using RF MEMS Switches for Wireless Systems

    … reconfigurable impedance tuner for a class-E high efficiency power amplifier using RF MEMS switches, and a reconfigurable self-similar antenna using RF MEMS switches. The first project was developed in order to facilitate the on-wafer measurement for the second and the third project, since …

    gatech Repository record for Low Power Reconfigurable Microwave Circuts Using RF MEMS Switches for Wireless Systems (opens in a new tab)

  9. Class-F Power Amplifier with Maximized PAE

    … operating speeds are getting faster and more power is being consumed by those devices. Therefore, there is a big concern on how to prolong the battery life in order to fit consumers’ needs. Power amplifiers (PA) at the front end of wireless equipment have drawn a big concern from engineers …

    calpoly Repository record for Class-F Power Amplifier with Maximized PAE (opens in a new tab)

  10. Design and Realization of Doherty Power Amplifier Based on Active Load- Pull Measurements

    Energy-efficient power amplifiers capable of supporting advanced communication standards are essential for the expanding wireless infrastructure. The Doherty power amplifier (DPA) is one of the most common high efficiency power amplifier (PA) architectures. However, the DPA is significantly …

    chalmers Repository record for Design and Realization of Doherty Power Amplifier Based on Active Load- Pull Measurements (opens in a new tab)

  11. Broadband Doherty Power Amplifier using Symmetrical GaN Transistors

    … with them the use of OFDM signaling to allow for higher data rates and better robustness against frequency selective channel interference. The OFDM protocols combined with multi-standard radios however have provided many challenges to the radio frequency, RF, industry with the largest challenge …

    waterloo Repository record for Broadband Doherty Power Amplifier using Symmetrical GaN Transistors (opens in a new tab)

  12. High-Efficiency Millimeter-Wave Front-Ends for Large Phased-Array Transmitters

    … beams. However the cost, complexity, and high power consumption of phased-array systems are key barriers to the commercialization of such technology. Silicon-based beam-former chips and scalable phased-array technology offer promising solutions to lower the cost of phased-array systems. …

    waterloo Repository record for High-Efficiency Millimeter-Wave Front-Ends for Large Phased-Array Transmitters (opens in a new tab)

  13. A 3.6 GHz Doherty Power Amplifier with a 40 dBm Saturated Output Power using GaN on SiC HEMT Devices

    … development, and implementation of a linear high efficiency power amplifier. The symmetrical Doherty power amplifier utilizes TriQuint's 2nd Generation Gallium Nitride (GaN) on Silicon Carbide (SiC) High Electron Mobility Transistor (HEMT) devices (T1G6001032-SM) for a specified design …

    portland-state Repository record for A 3.6 GHz Doherty Power Amplifier with a 40 dBm Saturated Output Power using GaN on SiC HEMT Devices (opens in a new tab)

  14. Ενισχυτές ισχύος ασύρματων μητροπολιτικών δικτύων βασισμένων στο πρότυπο 802.16

    … handset. In such portable devices, reducing power dissipation prolongs battery life. As PAs dominate power consumption in many RF systems, employment of more efficient amplification schemes (e.g. Class AB, E, F) could alleviate this problem. However, reduction of the conduction angle of an RE …

    greece Repository record for Ενισχυτές ισχύος ασύρματων μητροπολιτικών δικτύων βασισμένων στο πρότυπο 802.16 (opens in a new tab)

  15. Investigation of Time Domain Modulation and Switching-Mode Power Amplifiers Suitable for Digitally-Assisted Transmitters

    … world. The variety of frequency, bandwidth and power requirements associated with each standard typically calls for the implementation of separate radio frequency (RF) front end hardware for each standard. This is a less-than-ideal solution in terms of cost and device area. Software-defined …

    waterloo Repository record for Investigation of Time Domain Modulation and Switching-Mode Power Amplifiers Suitable for Digitally-Assisted Transmitters (opens in a new tab)