Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"High Impact Polystyrene"”.

  1. Kinetics of The Synthesis of High Impact Polystyrene

    <p>This thesis reports on an experimental and theoretical investigation of the kinetics of free radical polymerization of styrene in the presence of dissolved polybutadiene. A kinetic model which accounts for the grafting of polystyryl radicals on polybutadiene backbone and the concomitant effect …

    mcmaster Repository record for Kinetics of The Synthesis of High Impact Polystyrene (opens in a new tab)

  2. Analytical strategies for the quality assessment of recycled high-impact polystyrene (HIPS)

    … proposed to model the life cycle of recycled high-impact polystyrene (HIPS used in packaging applications, and electrical and electronic equipment (E&E). Both reprocessing and thermo-oxidative degradation are responsible for coexistent physical and chemical effects (chain scission, …

    upv Repository record for Analytical strategies for the quality assessment of recycled high-impact polystyrene (HIPS) (opens in a new tab)

  3. Application of high-impact polystyrene (HIPS) as a graphene nanoparticle reinforced composite thermoplastic adhesive

    … a wide range of materials. In this work, a high-impact polystyrene (HIPS) co-polymer containing butadiene as a toughness modifier is compounded with graphene nano-platelets (GnP) for investigation as a thermoplastic adhesive. The properties of the bulk composite adhesive are tailored by …

    msu Repository record for Application of high-impact polystyrene (HIPS) as a graphene nanoparticle reinforced composite thermoplastic adhesive (opens in a new tab)

  4. The influence of rubber composition on the polymerization and performance characteristics of high-impact polystyrene

    … to break were comparable to those of commercial impact polystyrenes. The impact strength of the SBR modified polymers was about three to four times higher than conventional HIPs. The impact properties were sensitive to rubber morphology. The ribbons in the SBR modified HIPs act as secondary …

    ut-knoxville Repository record for The influence of rubber composition on the polymerization and performance characteristics of high-impact polystyrene (opens in a new tab)

  5. The influence of processing on the morphology, orientation and mechanical properties of high impact polystyrene filaments

    … orientation and mechanical properties of high impact polystyrene (HIPs) filaments has been carried out. Morphological studies of melt spun HIPS filaments indicate that the rubber particles are broken up to smaller sizes with increase in draw down ratio and spinline stress. The filaments …

    ut-knoxville Repository record for The influence of processing on the morphology, orientation and mechanical properties of high impact polystyrene filaments (opens in a new tab)

  6. Photochemical degradation of polystyrene

    In this work the oxidative degradation of pure polystyrene, polybutadiene and butadiene-modified polystyrene (normally called high impact polystyrene or HIPS) have been studied using a variety of physical and chemical techniques. The changes in dynamic-mechanical properties occurring during the …

    aston Download PDF for Photochemical degradation of polystyrene (opens in a new tab)

  7. Use of X-ray K-edge Tomography and Interferometry Imaging Techniques for the Studies of Brominated Flame Retardants

    … their synergist, antimony trioxide (Sb2O3) in high impact polystyrene (HIPS). Chemical flame retardants are incorporated in polymers to improve their flame inhibition for optimal applications in electrical and electronic devices, furniture, printers and more. These flame retardant polymer …

    lsu-thes Repository record for Use of X-ray K-edge Tomography and Interferometry Imaging Techniques for the Studies of Brominated Flame Retardants (opens in a new tab)

  8. Evaluation of the separation involved in recycling end-of-life (EOL) electronic equipment

    … to separate two specific EOL plastics, namely High Impact Polystyrene (HIPS) and Acrylonitrile Butadiene Styrene copolymer (ABS).;The objective of this research was to investigate composition of keyboards and casings of personal computers, and other EOL components, as representative of …

    wvu Repository record for Evaluation of the separation involved in recycling end-of-life (EOL) electronic equipment (opens in a new tab)

  9. Investigation of Thermoplastic Polymers and Their Blends for Use in Hybrid Rocket Combustion

    … toxic propellants from small space applications. High and low density polyethylene plastics were used because they are common plastic waste items. In this way rocket fuel can be made from these items to reduce the waste found in landfills. Three plastics were considered for replacement and as …

    utahstate Repository record for Investigation of Thermoplastic Polymers and Their Blends for Use in Hybrid Rocket Combustion (opens in a new tab)

  10. Χρήση του D-λεμονενίου ως μονομερούς αντιδράσεων πολυμερισμού καθώς και ως βελτιωτικού των ιδιοτήτων συμβατικών πολυμερών

    … study these products were used as additive in High Impact Polystyrene and the final mixtures were analyzed by means of their mechanical properties along with their thermal stability. In the third stage of the dissertation D-limonene was used as a monomer for the copolymerization reaction with …

    greece Repository record for Χρήση του D-λεμονενίου ως μονομερούς αντιδράσεων πολυμερισμού καθώς και ως βελτιωτικού των ιδιοτήτων συμβατικών πολυμερών (opens in a new tab)

  11. Numerical Model for the Lateral Compression Response of a Plastic Cup

    … MSC.Patran, ABAQUS/CAE, and ABAQUS/Standard. The high impact polystyrene material of the cup is modeled as linear elastic, considering isotropic and orthotropic material behavior. The structural model of the cup is a truncated conical shell including a ring at the open end of the cup and …

    vt Repository record for Numerical Model for the Lateral Compression Response of a Plastic Cup (opens in a new tab)

  12. Rheological properties of polymer melts reinforced with small particles

    … flow and melt spinning characteristics for polystyrene melts reinforced with small rigid particles and high impact polystyrene (HIPs) is reported.</p><p>The influences of loading level, particle size and surface treatment were discussed. These systems exhibit yield values for both shear and …

    ut-knoxville Repository record for Rheological properties of polymer melts reinforced with small particles (opens in a new tab)

  13. Applications of Polymer-Layered Clay Nanocomposites

    … modified clays, which include polycaprolactone, polystyrene copolymer or terpolymer and poly (methyl methacrylate) copolymer. These nanocomposites were evaluated by X-ray diffraction, transmission electron microscopy, thermogravimetric analysis, cone calorimetry and mechanical properties. The …

    marquette Repository record for Applications of Polymer-Layered Clay Nanocomposites (opens in a new tab)

  14. THE PERFORMANCE AND MODIFICATION OF RECYCLED ELECTRONIC WASTE PLASTICS FOR THE IMPROVEMENT OF ASPHALT PAVEMENT MATERIALS

    … acrylonitrile butadiene styrene (ABS) and high impact polystyrene (HIPS). This research investigation utilized two approaches for incorporating electronic waste plastics into asphalt pavement materials. The first approach was blending and integrating recycled and processed electronic waste …

    mtu Repository record for THE PERFORMANCE AND MODIFICATION OF RECYCLED ELECTRONIC WASTE PLASTICS FOR THE IMPROVEMENT OF ASPHALT PAVEMENT MATERIALS (opens in a new tab)

  15. Terahertz characterisations and analyses of additive manufacturing materials and structures

    … optical components are identified, being high impact polystyrene (HIPS) and cyclic olefin copolymer (COC), and are demonstrated as 3D printed THz Bragg structures (interference filters). The potential frequency-domain performance and tuneability of THz Bragg structures, fabricated with a …

    ubc Repository record for Terahertz characterisations and analyses of additive manufacturing materials and structures (opens in a new tab) Download PDF for Terahertz characterisations and analyses of additive manufacturing materials and structures (opens in a new tab)

  16. Biaxial orientation and mechanical properties of amorphous polymers

    … was studied. The amorphous polymers studied were polystyrene, polycarbonate, polysulfone, poly(methyl methacrylate), R high impact polystyrene and Barex<sup>R</sup>.</p> <p>Birefringence was used as a measure of the orientation of the films stretched under various conditions. The stretching stress …

    utk-theses Repository record for Biaxial orientation and mechanical properties of amorphous polymers (opens in a new tab)

  17. Development and Commissioning of An Independent Peer Review System For A Small Animal Irradiator

    … audit. Two mouse phantoms were machined from high impact polystyrene; one accommodated three thermoluminescent dosimeters (TLD) and the other an Exradin A1SL 0.053 cc ion chamber (Standard Imaging, Middleton, WI) for cross-comparison with the TLD. An acrylic irradiation stand was constructed …

    uthsc Repository record for Development and Commissioning of An Independent Peer Review System For A Small Animal Irradiator (opens in a new tab)

  18. Identifying predictors of human exposure to brominated and organophosphate flame retardants in the indoor environments

    … standards for many materials including high impact polystyrene used in consumer electronics and polyurethane foam used in furniture. To date, research in the U.S. has primarily focused on polybrorninated diphenyl ethers (PBDEs), which have been shown to escape from products over time and …

    bu Repository record for Identifying predictors of human exposure to brominated and organophosphate flame retardants in the indoor environments (opens in a new tab)

  19. Ultrasonic wave reflection measurements on self-compacting pastes and concretes

    … impedance close to that of cement paste, high impact polystyrene, was chosen to obtain sensitive results from the early hydration period. Criteria for initial and final set developed by our group in a prior study were used to compute setting times by UWR. UWR results were compared with …

    uiuc Repository record for Ultrasonic wave reflection measurements on self-compacting pastes and concretes (opens in a new tab)

  20. Tribochemical Interactions between a Polymer Composite and Metals

    The high specific strength, chemical resistance and processability of polymer composites have made them an attractive alternative to traditional metals and ceramics in many industries. For tribological applications, polymer composites also have the ability to eliminate the need of lubricants and …

    mcmaster Repository record for Tribochemical Interactions between a Polymer Composite and Metals (opens in a new tab)

Page 1 of 2