Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"High Power Impulse Magnetron Sputtering"”.
-
Magnetic field optimization for high power impulse magnetron sputtering
"High Power Pulsed Magnetron Sputtering (HPPMS) or High Power Impulse Magnetron Sputtering (HiPIMS) is a promising Physical Vapor Deposition technique with several advantages over DC Magnetron Sputtering (dcMS). HiPIMS has gained a lot of interest in the recent years from the coating industries. …
-
Anomalous current and voltage fluctuations in high power impulse magnetron sputtering
The objective of this work was to study dc and High Power Impulse Magnetron Sputtering (HiPIMS) plasmas in order to better understand the various aspects of sputtering; such as rate, uniformity and current and voltage characteristics. The results compare known characteristics for general plasmas as …
-
High power impulse magnetron sputtering (HIPIMS) : Fundamental plasma studies and material synthesis.
… physical vapour deposition technology entitled high power impulse magnetron sputtering (HIPIMS) was suggested. The principle of HIPIMS is to utilize impulses (short pulses) of high power delivered to the target in order to generate high amount of metal ions with degree of metal ionization up to …
-
Linear magnetron high deposition rate magnet pack for high power impulse magnetron sputtering
High Power Impulse Magnetron Sputtering (HiPIMS) or High Power Pulsed Magnetron Sputtering (HPPMS) is a magnetron sputtering method that has proven to be a promising ionized physical vapor deposition (PVD) technique, with industrial implementation hindered by low deposition rates. HiPIMS applies …
-
Electrical and optical properties of silver films deposited by high power impulse magnetron sputtering
… deposited on different substrates by High Power Impulse Magnetron Sputtering (HIPIMS). In-situ spectroscopy ellipsometer (SE) was used to study the growth process and resistivity of Ag films. The combination of low substrate temperature and suitable ion flux resulted in lower …
-
Comparison of high power impulse magnetron sputtering and modulated pulsed power sputtering for interconnect metallization
… penetration, and create less overhang due to the high directionality of ion flux. In this work, high power impulse magnetron sputtering (HiPIMS) and its derivative, modulated pulsed power (MPP) magnetron sputtering, with their claimed high ionization capability, are proposed for the application of …
-
Micro-structural and functional properties of TiAlCN/VCN coating produced by High Power Impulse Magnetron Sputtering Technology.
… machine capable to operate with both unbalanced magnetron sputtering (UBMS) and high power impulse magnetron sputtering (HIPIMS) mode. The work was directed to study the impact of HIPIMS on the microstructure of the nanoscale TiAlCN/VCN coating, in relation to its properties at both room and …
-
Effects of High-Power Impulse Magnetron Sputtering on the Early Growth of Noble Metals on Weakly-Interacting Surfaces
This thesis investigates how high-power impulse magnetron sputtering (HiPIMS) influences the early growth of noble-metal thin films on weakly interacting silicon dioxide and polymer substrates. Compared with direct-current magnetron sputtering (DCMS), HiPIMS provides a higher ionized flux fraction …
-
Plonų TiO2 sluoksnių formavimas didelės galios impulsinio magnetroninio dulkinimo metodu ant struktūrizuotų puslaidininkio paviršių ir darinių savybių tyrimai /
… Films on Structured Semiconductors Surfaces with High Power Impulse Magnetron Sputtering and Analysis of It's Properties.
-
ICP Enhanced HIPIMS System Design and Characterisation
A custom inductively coupled plasma assisted high-power impulse magnetron sputtering system was designed and assembled for the study of E x B plasma spoke instabilities. The magnetron plasma was characterized using time-resolved Langmuir probe, floating probe, optical emission spectroscopy and …
-
Povlakování nástrojů PVD technologií HiPIMS
… nástrojů se zaměřením na technologii HiPIMS (High Power Impulse Magnetron Sputtering). V rámci rešerše jsou nejprve představeny PVD metody povlakování, následně jsou popsány základní fyzikální procesy a charakteristiky magnetronového naprašování a nakonec je analyzována moderní povlakovací …
-
Roll-to-roll sputtering of thermochromic VO2-based coatings onto ultra-thin flexible glass
… layer stack design enabled the achievement of high performance using unipolar pulsed and high power impulse magnetron sputtering. For this purpose, a new oxygen control system was developed. Furthermore, the optical and structural properties of the deposited coatings were characterized, as well …
-
A Study of PVD Bi-Layer Cutting Tool Coatings Used for Machining of Super Duplex Stainless Steel
… presents a significant challenge due to the high temperatures and stresses generated during the cutting process, which result in rapid tool wear. To address this challenge, a series of Physical Vapour Deposition (PVD) bi-layer multifunctional coatings were developed to improve tool …
-
Analýza povrchových úprav stopkových fréz
… leštění DryLyte a povlakování metodou High Power Impulse Magnetron Sputtering (HiPIMS), na stopkové frézy vyrobené ze slinutého karbidu WC-Co. Byly připraveny čtyři nástroje s odlišnými povrchovými úpravami, včetně leštění DryLyte po dobu tří a šesti minut, s následným povlakováním …
-
Niobium titanium nitride thin film deposition, optimization, and characterization
… a superconducting critical temperature among the highest of the superconductors described by Bardeen, Cooper, and Schreiffer (BCS) theory. NbTiN has excellent mechanical and electrical characteristics and is easily deposited via reactive magnetron sputtering from metal sputter targets at low …
-
Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys
High Power Impulse Magnetron Sputtering (HiPIMS) comes as a new and promising PVD method for the development of high-performance coatings for cutting applications. This technique utilizes high energy and ionization which can produce a denser and stronger ceramic in comparison to traditional …
-
Superconducting Thin Films for The Enhancement of Superconducting Radio Frequency Accelerator Cavities
… have been attempted in the past using DC magnetron sputtering (DCMS), such cavities have never performed at the bulk Nb level. However, new energetic condensation techniques for film deposition, such as High Power Impulse Magnetron Sputtering (HiPIMS), offer the opportunity to create …
-
Development of high temperature/oxidation- resistant PVD coatings for cutting tools using HIPIMS
A series of high temperature and oxidation resistant, nanoscale, multilayer PVD, hard coatings have been developed through combine DC Unbalanced Magnetron (UBM) and High Power Impulse Magnetron Sputtering (HIPIMS) deposition technologies. The properties of the coatings lend themselves to the …
-
Modified Reactive Sputter Deposition of Titanium Nitride Thin Films via HIPIMS with Kick-Pulse and Improvement of the Structure-Zone Model
Direct current (DC) and radio frequency (RF) sputtering methods have been commonplace in industry for several decades and widely studied in literature. Hard films of nitrides, such as titanium nitride (TiN), have been deposited using reactive DC sputtering onto cutting tools and medical devices …
-
Nitriding of medical grade CoCrMo alloys using HIPIMS discharge
… process for a bio-grade CoCrMo alloy using a High Power Impulse Magnetron Sputtering (HIPIMS) discharge. An industrial-sized PVD machine (Hauzer techno Coating 1000-4, The Netherlands) machine equipped with two HIPIMS and two DC power supplies was utilised for this objective. Low-pressure …
Page 1 of 2