Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 77 for “"High Speed Steel"”.
-
Thermal behaviour of high speed steel work rolls
HSS (high speed steel) rolls are among the latest technological addition to the hot rolling process. Reduced wear, increased campaign times, increased life and better control on the quality of the strip are some of the features of HSS rolls which transforms directly into higher productivity making …
-
The Nitriding Of High Speed Steel Cutting Tools
… cost of machine downtime. Saltbath nitriding of high speed steel tools adds only about 1%to the cost of a finished tool, but has been found to confer benefits considerably in excess of this over a range of cutting conditions .A series of cutting tests is described, during which cutting forces and …
-
The hot quenching of molybdenum-tungsten high speed steel
Thesis ()--Michigan State College of Agriculture and Applied Science. Dept. of Mechanical Engineering, 1943
-
The Relationship of Segregation Structure and Properties in High Speed Steel
… between microstructure and properties of high speed steels has been examined, with particular reference to fracture toughness and fatigue crack growth rates. Microstructural variations have been obtained by: (i) variation of heat treatment parameters - austenitising temperatures and …
-
An investigation of the needle like structure in high speed steel
Thesis--Michigan State College of Agriculture and Applied Science, 1927
-
Oxidation and wear behaviour of a work roll grade high speed steel
The oxidation behaviour of high speed steel (1.55 % C, 7.70 % Cr, 4.90 %V, and 2.00% Mo) was studied isothermally at 550 and 615'C for three different environmental conditions, two of which consisted in a mixture of dry air and water vapour flowing at a rate of 0.45 or 1.45 cm'/min respectively, …
-
Performing a capability analysis on holes drilled with standard high speed steel drill bits
… is produced when holes are drilled with standard high speed twist drills, document that the distribution is not normal, and therefore that standard capability analysis method does not give accurate results. In addition, it was desired to develop a procedure that does give accurate numbers when a …
-
Characterization and development of FeCrW high speed steel coating for abrasive and impact wear applications
XH-7 is a high speed steel alloy developed for use in surface coating to improve the impact and abrasive wear resistance of machine parts and tools. The desired structure of the material is a martensitic matrix with fine carbide and boride precipitates. In order to form these precipitates carbide …
-
Finite element thermal analysis towards microstructure improvement in directed energy deposition of high speed steel
… into the Directed Energy Deposition process of High-Speed Steel M4. Through a blend of computational modeling (MSM) and experimental work (MMS), this research explores the complex interrelations between process parameters, thermal history, and the resultant microstructural and mechanical …
-
A study to improve the life of high speed steel tools with ion plated refractory compounds
Dissertation made openly available per email from author, 6/13/2016.
-
Some observations of the microscopic and physical changes resulting from heat-treatment and an investigation of the dilatometric & thermal changes resulting from heat-treatment of high speed steel
Thesis (M.S.)--Michigan State College of Agriculture and Applied Science, 1933
-
Machinability study of tool steel (Din 1.2311) through end milling
… machinability assessment when end milling tool steel (Din 1.2311) BHN 300. The tool steel is a pre-hardened steel and it is widely used for molds or dies in the injection moulding industry. It is also classified as AIS1 grade P20 mold steel. The objective of this assessment is to generate …
-
Laser surface treatment of materials with presence of carbides at the surface.
… Haynes 188 and Inconel 718 alloys, and high speed steel workpieces. Metallurgical and morphological changes in the laser treated layer are examined using Scanning Electron Microscopy, Energy Dispersive Spectroscopy, and X-ray Diffraction. A carbon film of about 50 thickness and …
-
Investigation of M2 and anti-segregation process HSS flat broaching tools.
… cutting performance and tool life evaluation of high speed steel broach samples. The comparison has been done between conventional M2 and Anti-Segregation Process (ASP) ASP53 and ASP30 high speed steel broach samples. The ASP53 was a development material. The cutting performance was evaluated by …
-
Investigation of Machining (Drilling) of Bio-Composite Reinforced with Jute Fibers under Different Machining Conditions
… Drill bit Type (Titanium Nitride-TiN, High Speed Steel-HSS and High-Speed Steel Cobalt HSS-Co) and Lubrication condition (Dry, Minimum Quantity Lubrication-MQL and Cryogenic-LN2). A total of 27 experimental trials were performed, and the responses were measured for each condition. …
-
An investigation into the wear characteristics of bandsaw blades and their influence on the sawing rates and costs of bandsaw operations.
… on: tool temperature, tool life / cutting speed relationships, tool life / temperature and temperature / time relationships, Colding's three dimensional tool life equation and.an analysis of the Taylor constant.The development of empirical cutting tool life equations is reviewed and …
-
The mechanics of drawing wire at elevated temperatures
… was developed. The technique of drawing mild steel, medium carbon steel and M2 'high speed' steel wires up to 700°C and about 45% area of reduction was established. The mechanics of wire drawing at elevated temperatures has been studied in depth theoretically and practically. An upper bound …
-
A study of machining parameters to optimize surface finish in metal cutting through CNC
… using two different cutting tool materials(high speed steel and cemented carbide) and a workpiece of Aluminium. The results have been then evaluated and analyzed to see the effects of various combinations of cutting conditions, that is, feed, speed, and depth of cut. Recommendations have …
Page 1 of 4