Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 342 for “"High Strength Steel"”.
-
Buckling of high-strength steel beams
… instability of I-section beams fabricated from high-strength steel (HSS) plates having yield stresses greater than 690 MPa. The research program contains three major tests including the assessment of residual stresses in welded I-sections, the buckling of I-beams and the lateral-torsional …
-
Buckling of high-strength steel members
High-strength steel (HSS) with a yield strength over 450 MPa is gaining increasing use in modern building construction, but there is little guidance available in current design standards. This research uses an accurate and reliable finite element (FE) model to investigate the buckling strengths and …
-
High Strength Steel Reinforcement in Concrete Columns
… AS 3600 incorporated 500 MPa grade reinforcing steels, which represented a 20 percent increase in strength over the 400 MPa grade steel of the previous version. The latest version of AS 3600 - 2018 allows for high strength steel up to 600 MPa for longitudinal reinforcement and 800 MPa for tie …
-
Corrosion-Involved Degradation of Ultra High Strength Steel
… susceptibility of a novel ultrafine grain high strength steel were studied under different concentrations of H2S and pH. The critical sulfide stress cracking factor (KISSC ) was applied to characterize the sulfide corrosion cracking susceptibility based on fracture mechanics. Increasing …
-
Hydrogen Embrittlement of Nanostructred Bainitic High Strength Steel
Characterization of nanostructured bainitic high strength steel revealed austenitic and bainitic-ferritic constituents. Hydrogen diffuses through austenite slower than bainitic ferrite. Discovering the effective hydrogen diffusion coefficient, subsurface hydrogen concertation and number of traps of …
-
Setting bar-bending requirements for high-strength steel bars
The reinforcing steel industry is currently developing high-strength reinforcing bars with specified yield strengths of 80 and 100 ksi, due to increased demand for such grades in concrete construction. However, none of the higher steel grades are able to match the benchmark mechanical properties of …
-
Bake hardening behavior of advanced high strength steel grades
Advanced high strength steels (AHSS) have been developed combining high strength and formability, allowing for lightweighting of vehicle structural components. These AHSS components are exposed to paint baking treatments, following straining induced from part forming, which may lead to increased …
-
Assessment of corrosion defects on high-strength steel pipelines
… concentration on corrosion at defect on X100 high-strength steel pipelines, and develop theoretical concepts and predictive models to provide guidelines and recommendations to industry for an improved integrity management of pipelines. A mechano-electrochemical (M-E) effect concept, which was …
-
Friction Stir Spot Welding of Ultra-High Strength Steel
… becoming a method of interest for welding of high strength steel (HSS) and ultra high strength steel (UHSS). FSSW has been shown to produce high quality welds in these materials, without the drawbacks associated with fusion welding. Tool grade for polycrystalline cubic boron nitride (PCBN) …
-
Behavior of Concrete Structures Reinforced with High Strength Steel
The structural strength and corrosion resistance of concrete members are improved when A1035 steel is used as the main reinforcement. The enhancement of A1035 is achieved by the modification of the composition and microstructure of the steel. Therefore, the behavior of concrete structures …
-
Lap Splicing of Large High-Strength Steel Reinforcing Bars
… reinforcement, nominal concrete compressive strengths of 5 or 10 ksi [35 or 69 MPa], and target bar stresses at splice failure of 60 and 100 ksi [420 to 690 MPa] for No. 14 [43 mm] bars and 60 ksi [420 MPa] for No. 18 [57 mm] bars.Test results show that lap splices of No. 14 [43 mm] bars can …
-
Reinforced Concrete Coupling Beams with High-Strength Steel Bars
The use of high-strength steel bars in reinforced concrete coupling beams has the potential to reduce reinforcement congestion and support more efficient design and construction methods. A series of tests was conducted to investigate the effects of high-strength reinforcement on coupling beam …
-
LOCAL BUCKLING OF HIGH STRENGTH STEEL W-SHAPED SECTIONS
<p>W-shaped steel members are widely used in various structural applications, such as buildings, bridges, and industrial complexes. The recent trend is to produce W -shaped sections using higher and higher strength steel as a replacement for mild-carbon steel, such as 300W steel. However, the …
-
Seismic performance of concrete columns reinforced with high strength steel
… performance of concrete columns reinforced with high-strength steel. Comparisons are made between the performance of columns reinforced with conventional Grade 60 steel, and the higher Grade 80. The high-strength steel used in this study is the result of a recent push in the U.S. to produce …
-
Strength and Behavior of Advanced High Strength Steel Structural Components
Advanced High Strength Steel (AHSS) is the next generation of steel for cold-formed steel (CFS) construction. With the superior strength of AHSS, the design space of CFS structures can be greatly extended, leading to improved efficiency and less steel consumption in construction. A research …
Page 1 of 18