Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 905 for “"High Vacuum"”.

  1. Surface studies in ultra high vacuum

    An ultra high vacuum system capable of attaining pressures of 10-12 mm Hg was used for thermal desorption experiments. The metal chosen for these experiments was tantalum because of its suitability for thermal desorption experiments and because relatively little work has been done using this metal. …

    aston Download PDF for Surface studies in ultra high vacuum (opens in a new tab)

  2. Accurate determination of high vacuum pressure

    Two methods for the accurate determination of high vacuum pressure are reviewed with particular attention paid to the 10$\sp{-6}$ to 10$\sp{-5}$ Torr range. The first method is characterized by calculating the pressure generated from a knowledge of the characteristics and geometry of the vacuum …

    rice Repository record for Accurate determination of high vacuum pressure (opens in a new tab)

  3. Large-scale graphene transfer in ultra-high vacuum and design of a low temperature ultra-high vacuum scanning tunneling microscope

    … graphene onto clean surfaces in an ultra-high vacuum scanning tunneling microscope chamber via a modified direct contact transfer method. A polyethylene terephthalate (PET) film was chosen as the material for supporting graphene during the in-situ transfer. Both a scanning electron …

    uiuc Repository record for Large-scale graphene transfer in ultra-high vacuum and design of a low temperature ultra-high vacuum scanning tunneling microscope (opens in a new tab)

  4. Tip-enhanced Raman spectroscopy in ultra-high vacuum

    … on surfaces. TERS possesses both, a very high sensitivity - down to the single molecule level - and a spatial resolution in the 10 nm range. In contrast to most TERS studies, we perform our experiments under ultra-high vacuum (UHV) conditions to ensure a high sample quality. Therefore, we …

    fu-berlin Repository record for Tip-enhanced Raman spectroscopy in ultra-high vacuum (opens in a new tab)

  5. Mems Radioisotopic Battery Cell With High Vacuum Insulation

    Made available in DSpace on 2017-07-06T18:55:05Z (GMT). No. of bitstreams: 3 Lee_Jin_R_MS.pdf: 1212298 bytes, checksum: d5ebe99fdccb8be023b97282fb55d2e8 (MD5) Lee_Jin_R_MS_ABS.pdf: 82352 bytes, checksum: e91f5c85af60755e92b6a8bc6eb5d65d (MD5) license.txt: 4813 bytes, checksum: …

    uiuc Repository record for Mems Radioisotopic Battery Cell With High Vacuum Insulation (opens in a new tab)

  6. Development of the High Vacuum Steady-State Orbitron MASER

    <p>The Orbitron MASER is a device which can be used to generate R.F. radiation. This device has been operated for many years as a gas filled pulsed device. This thesis describes a brief history, design and operation of several steady-state, hot cathode Orbitron MASER. It also touches on a pulsed …

    ut-knoxville Repository record for Development of the High Vacuum Steady-State Orbitron MASER (opens in a new tab)

  7. Cooling and Stabilization of Graphene Nanoplatelets in High Vacuum

    … probe an individual single-layer specimen is of high importance. The levitation approach serves as a natural solution for this problem and can be used in ways complementary to the standard techniques. Experiments, including study of properties at high or close to melting temperatures, stretching, …

    maryland Repository record for Cooling and Stabilization of Graphene Nanoplatelets in High Vacuum (opens in a new tab)

  8. Surface Area Studies of High Vacuum Evaporated Nickel Films

    The adsorption isotherms of krypton on high vacuum evaporated nickel films and nickel films which have chemisorbed oxygen have been studied. The oxygenation of the clean nickel films was effected either by admitting pure oxygen to the surface directly or by allowing nitrous oxide to catalytically …

    glasgow Download PDF for Surface Area Studies of High Vacuum Evaporated Nickel Films (opens in a new tab)

  9. Ultra-High Vacuum Studies of Model Boundary Layer Lubricants

    … onto single-crystal metal surfaces under ultra-high vacuum conditions. Chapter 3 presents results from the adsorption of a set of straight-chain carboxylic acids and perfluorinated carboxylic acids onto the Ag(110) surface. The carboxylic acids are found to desorb reversibly from the clean …

    uiuc Repository record for Ultra-High Vacuum Studies of Model Boundary Layer Lubricants (opens in a new tab)

  10. Cryodeposit Thin Film Detection Techniques in a High-Vacuum Environment

    … A new setup to detect cryodeposit thin films in high vacuum environments is under development and has been tested at the University of Tennessee Space Institute’s (UTSI) Center for Laser Applications (CLA). This setup uses a multiple-beam laser interferometer that is incident the mirror surface …

    ut-knoxville Repository record for Cryodeposit Thin Film Detection Techniques in a High-Vacuum Environment (opens in a new tab)

  11. Introducing water vapor into a high vacuum chamber at AEDC.

    … was heated to provide water vapor in a vacuum chamber for an experiment seeking to study cryodeposit thin films of ice at the Arnold Engineering Development Center (AEDC) in Tullahoma, TN. However, after the test was conducted, calcium sulfate deposits were found on all surfaces inside …

    ut-knoxville Repository record for Introducing water vapor into a high vacuum chamber at AEDC. (opens in a new tab)

  12. Temperature Programmed Desorption of Graphene Oxide Under Ultra-High Vacuum

    … by temperature programmed desorption under ultra-high vacuum conditions. The primary decomposition components of the films are H2O, CO2, and CO.

    texas-state Repository record for Temperature Programmed Desorption of Graphene Oxide Under Ultra-High Vacuum (opens in a new tab)

  13. The design and construction of a high vacuum bearing test apparatus.

    … operate under the extreme temperatures and the high vacuum (10 to 10 mm Hg.) of outer space. A critical problem is that of developing bearings which will operate for long, unattended periods of time. Conventional bearings cannot be used because the liquid lubricants are quickly evaporated by the …

    nps Repository record for The design and construction of a high vacuum bearing test apparatus. (opens in a new tab)

  14. Scanning tunnelling microscopy study of silicon surfaces in ultra high vacuum

    … atom from a corner to a middle adatom. With higher hydrogen exposures the surface Is etched producing SiH4. It is determined that the SiC crystallites can also be etched by atomic hydrogen. For the higher exposures, the surface appears rough as seen by STM but well defined changes in the LEED …

    ubc Repository record for Scanning tunnelling microscopy study of silicon surfaces in ultra high vacuum (opens in a new tab) Download PDF for Scanning tunnelling microscopy study of silicon surfaces in ultra high vacuum (opens in a new tab)

  15. Sensitive Force Measurements With Optically Trapped Micro-Spheres in High Vacuum

    … optically levitating and cooling microspheresin vacuum for use as force sensors. We have extensively modeled various optical trap congurations to determine stable trap geometries for m sized spheresin a dual-beam optical trap. Techniques have been developed for overcoming instabilities which …

    unr Repository record for Sensitive Force Measurements With Optically Trapped Micro-Spheres in High Vacuum (opens in a new tab)

  16. Ultra high vacuum scanning tunneling microscopy to study thin film growth

    An ultra high vacuum chamber was constructed to study thin film growth using scanning tunneling microscopy (STM). The sample stage is specially designed so that samples can be transferred in situ among various film preparation techniques. For first studies, Ru thin films were deposited at …

    rice Repository record for Ultra high vacuum scanning tunneling microscopy to study thin film growth (opens in a new tab)

Page 1 of 46