Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 47 for “"High heating rate"”.
-
Pyrolysis of Fine Coal Particles at High Heating Rate and Pressure
High-intensity pyrolysis, rapid heating in an inert gas atmosphere at up to 20 atm pressure, of 6 Australian coals was examined to gain further insight into high-intensity processes such as Integrated Gasification Combined Cycles (IGCC). Experiments focussed on pyrolysis in a specially developed …
-
Effects of Pressure on Coal Pyrolysis at High Heating Rates and Char Combustion
… are now becoming popular because of their high efficiencies and minimal environmental impact. Higher operating pressures have been applied to clean coal technologies. The effect of pressure on coal pyrolysis and char combustion has been extensively studied but still remains to be further …
-
A Study on the Wetting Behaviour of Ti-20Zr-20Cu-20Ni Brazing Filler on Ti-6Al-4V
… the brazing filler to be able to wet the substrate. Unfortunately, there is a research gap with respect to the study on the wetting and spreading behaviour of brazing fillers on titanium alloys. In this work, wetting behaviour of Ti-20Zr-20Cu-20Ni brazing filler on Ti-6Al-4V was studied using …
-
Understanding the Relationships Between Architecture, Chemistry, and Energy Release of Energetic Nanocomposites
… are a class of reactive material that incorporate nanosized materials or features in order to enhance reaction kinetics and energy densities. Typically, these systems employ metal nanoparticles as the fuel source and have demonstrated reactivities orders of magnitude larger than more …
-
Gasification of Biomass, Coal, and Petroleum Coke at High Heating Rates and Elevated Pressure
… from 4 to 65 atm with local gas temperatures as high as 2000 °C. Many gasification studies have been performed at moderate temperatures, heating rates, and pressures. In this work, both pyrolysis and char gasification experiments were performed on coal, petroleum coke, and biomass at conditions …
-
The evolution of B2-ZrCo phase in Zr-Co-Al bulk metallic glasses upon quenching from the melt and subsequent thermal treatment
… fabricated either a fully glassy alloys with a high content of Al or ultrafine-grained alloys with equimolar Zr-Co and low content of Al. Therefore, the focus of this thesis is to investigate formation of the B2-ZrCo phase in a glassy matrix in terms of alloy composition, especially the Co/Zr …
-
Pyroelectric emission from PbZr20Ti80O3 emitter coupled on silicon heater
This thesis reports pyroelectric emission from high frequency epitaxial 60 nm thick PbZr20Ti80O3 (PZT) film emitters coupled on silicon heater. The silicon heater is designed for generating joule heating on heater regions using low dosage ion implantation, while bridging electric connection on leg …
-
ION TRAP SYSTEM TOWARDS 176LU+ 3D2 CLOCK TRANSITION
… which replaces the previous one limited by high heating rate. The new trap exhibits significantly reduced heating that permits a long Ramsey interrogation time, improved excess micromotion compensation, and precise characterization of trap rf magnetic field contributing to the ac Zeeman …
-
A multiphysics phase field model on melting and kinetic superheating of aluminum nanolayer and nanoparticle
… counterpart. It has been observed that a highly non-equilibrium state can result in extreme superheating of a solid state, which cannot be explained well by thermodynamic theories based on equilibrium or nucleation. An endeavor to find the superheating limit and mechanisms of melting and …
-
Modeling of High-Pressure Entrained-Flow Char Oxidation
… and lower emissions are becoming more popular. High pressure reactors and oxyfuel combustion can offer these benefits. Designing new reactors effectively requires accurate single particle modeling. This work models a high-pressure, high-temperature, high-heating rate, entrained-flow, char …
-
Rapid pyrolysis of eastern and western oil shales in an entrained reactor.
… (Colorado) oil shales. Under the condition of high heating rate, a fundamental understanding of the processes influencing oil production and product quality/composition was obtained. Flow visualization and temperature characterization in the LFER were conducted to provide a critical laminar …
-
EXPLORING THE RELATIONSHIPS BETWEEN FUEL AND OXIDIZER REACTION OF BIOCIDAL ENERGETIC MATERIALS
… defined as a class of material with extremely high amount of stored chemical energy that can be released when ignited, along with intensive light emission and shock generation. Developing new energetic materials with high efficiency neutralization of biological warfare agents has gained …
-
Study of combustion performance of Al/PTFE B/PTFE and B/Al/PTFE composites
… as additives to energetic materials due to their high gravimetric and volumetric heat of combustion. However, the ignition temperatures of metals are quite high and their burning rates which depend upon the surface area of the burning metal agglomerates are quite slow. The naturally formed oxide …
-
UNDERSTANDING AND TAILORING THE REACTIVE CHARACTERISTICS OF NANOENERGETIC COMPOSITES VIA STRUCTURAL AND CHEMICAL MODIFICATIONS
… as propellants and pyrotechnics, due to their high energy density. The overall reaction kinetics of the heterogenous nanoenergetic system is controlled by mass transfer. The use of nanoparticles is to reduce diffusion length and thus increase energy release rate. The objective of the proposed …
-
Advanced Devolatilisation model for Lagrangian particles in OpenFOAM
… useful tool. The aim of this thesis is to accurately model coal devolatilisation at high temperatures associated with cement kilns to facilitate the further study of coal combustion within a cement kiln, to increase combustion efficiency thereby decreasing the environmental impact associated …
-
Characterizing the thermal reactivity of novel inorganic energetic formulations
… new shell chemistry is aluminum iodate hexahydrate ((Al(H2O)6(IO3)3(HIO3)2), AIH). To examine the compatibility of AIH with common energetic ingredients, AIH is combined with metal oxides often used in energetic formulations. Three metal oxides: bismuth (III) oxide (Bi2O3), copper (II) oxide …
-
Rapid hydropyrolysis of coals for production of liquid hydrocarbons
… coal is becoming attractive due to potential high cost and uncertain supply of crude petroleum oil. Conventional techniques of coal liquefaction, though technically feasible, have been expensive due to hydrogen requirements, high pressure equipment, and high cost of commercial supported …
-
ENERGETIC BIOCIDAL MATERIALS AND SPORE NEUTRALIZATION
… of this dissertation is to explore a more accurate and versatile approach to investigating the neutralization of spores suffered from ultrafast heating and biocide based stresses, and further to explore and understand novel methods to supply ultrafast heating and biocides through nanostructured …
-
Probing the Dynamics of Ultra-Fast Condensed State Reactions in Energetic Materials
Energetic materials (EMs) are substances with a high amount of stored energy and the ability to release that energy at a rapid rate. Nanothermites and green organic energetics are two classes of EMs which have gained significant interest as they each have desirable properties over traditional …
-
Impact of Operational Conditions on the Transient Thermal Behavior of Lithium-Ion Batteries
Considering the high increase of lithium-ion batteries (LIBs) through the years, it is important to analyze the impact of the operational conditions, such as charging and discharging on the transient thermal behavior of LIBs for thermal management of Li-Ion batteries. A pseudo two-dimensional …
Page 1 of 3