Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 51 for “"High speed data acquisition"”.

  1. High speed data acquisition system.

    … the expansion and modification of an existing data acquisition system to effect extensive improvements in speed and flexibility. A microprocessor, flexible disk drive, analog to digital converter, direct memory access module, and high-speed line printer were integrated and interfaced to an IBM …

    nps Repository record for High speed data acquisition system. (opens in a new tab)

  2. A programmable high-speed data acquisition controller

    … operating at sampling rates up to 1 MHz yield data rates that surpass the throughput bandwidths of digital computers. Long-term acquisition of these data requires specialized magnetic tape recorders for data storage and later playback and analysis.</p> <p>A programmable high-speed data …

    ut-knoxville Repository record for A programmable high-speed data acquisition controller (opens in a new tab)

  3. Development of a High Speed Data Acquisition System for Spark Ignition Engine

    … Therefore an engine model based on experimental data had to be developed. Using Matlab/ Simulink, xPC Target and data acquisition hardware a model of the single cylinder engine was developed. These models were developed by taking measurements of the engines dynamics such as engine speed, crank …

    gsu Repository record for Development of a High Speed Data Acquisition System for Spark Ignition Engine (opens in a new tab)

  4. An Fpga Based Test Bench With High Speed Data Acquisition For Mixed Signal Applications

    Although multiple data link protocols that can handle 10's of Gbps have been developed over the years, engineers in the test industry either rely on dated standards such as RS-232 and GPIB or expensive dedicated hardware that is inflexible and costly. This work investigated building a framework for …

    cornell Repository record for An Fpga Based Test Bench With High Speed Data Acquisition For Mixed Signal Applications (opens in a new tab)

  5. High-Speed Data Acquisition and FPGA Detected Pulse Blanking System for Interference Mitigation in Radio Astronomy

    … This thesis documents the development of a high-speed data acquisition system used to record data from 7- and 19-element phased array feeds. The system supports synchronous sampling over all channels and streams data to disk allowing spatial filtering to be applied in post-processing. The …

    byu Repository record for High-Speed Data Acquisition and FPGA Detected Pulse Blanking System for Interference Mitigation in Radio Astronomy (opens in a new tab) Download PDF for High-Speed Data Acquisition and FPGA Detected Pulse Blanking System for Interference Mitigation in Radio Astronomy (opens in a new tab)

  6. VPX based data acquisition and processing system

    The VPX based data acquisition and processing system is a 3U OpenVPX based embedded computer that has been specifically designed for instrumentation and signal processing applications. It has features that make it ideal for use in high speed data acquisition, data streaming and real time data …

    ttu Repository record for VPX based data acquisition and processing system (opens in a new tab)

  7. An intelligent computerized pulse-duplicator for the in-vitro evaluation of prosthetic heart valves

    <p>A computerized data acquisition system is presented for the in-vitro determination of the hydrodynamic performance of prosthetic heart valves. High speed data acquisition and ensemble averaging techniques are employed to minimize error and provide a standard for data collection and analysis …

    njit Repository record for An intelligent computerized pulse-duplicator for the in-vitro evaluation of prosthetic heart valves (opens in a new tab)

  8. Functional Prototype of an Adaptive Optics System for Intermediate Size Telescopes

    … successful tech- niques to achieve extremely high resolution. Lucky imaging takes advantage of the natural variability in atmospheric conditions that occur during the exposure time of an astronomical image. Therefore, by capturing a large number of short-exposure images using a fast detector …

    ull Repository record for Functional Prototype of an Adaptive Optics System for Intermediate Size Telescopes (opens in a new tab)

  9. A study of lean premixed swirl-stabilized combustion of gaseous alternative fuels.

    … using a condenser microphone and digitized by a high speed data acquisition card. (Abstract shortened by UMI.)

    oklahoma-thes Repository record for A study of lean premixed swirl-stabilized combustion of gaseous alternative fuels. (opens in a new tab)

  10. Flosy : a nonpreemptive FEP operating system

    In high-speed data acquisition systems where efficient data interrupt handling is the central issue, it is often desirable to off-load the real-time data acquisition tasks to a dedicated front-end processor (FEP), leaving the host to handle only the non-real-time tasks. The front-end processor in …

    ubc Repository record for Flosy : a nonpreemptive FEP operating system (opens in a new tab) Download PDF for Flosy : a nonpreemptive FEP operating system (opens in a new tab)

  11. DETERMINATION OF ROUND EXIT VELOCITY USING FIBER BRAGG GRATING SENSORS

    … providing temperature compensation and enable high-speed data acquisition. The elapsed time information extracted from the resulting strain waves is used to estimate the round exit velocity (REV). An approach based on short-time Fourier analysis and cross-correlation has been developed to …

    maryland Repository record for DETERMINATION OF ROUND EXIT VELOCITY USING FIBER BRAGG GRATING SENSORS (opens in a new tab)

  12. Seismic monitoring of dynamic bridge deformations using strain measurements

    … fiber optic strain gauges along with a high-speed data acquisition system for future verification tests. Various laboratory static and dynamic verification tests using traditional electrical resistance strain gauges were performed on three beam specimens in the Structures Laboratory at …

    hawaii Repository record for Seismic monitoring of dynamic bridge deformations using strain measurements (opens in a new tab)

  13. Design and testing of a high data rate instantaneous laser doppler velocity probe

    … capable of measuring a single component velocity data at a rate as high as two megahertz. The probe can be employed in high-speed and unsteady flows, especially where high data capture rate is needed such as in shock tubes, high-speed wind tunnels, and pulse detonation engines. However, the probe …

    alabama Repository record for Design and testing of a high data rate instantaneous laser doppler velocity probe (opens in a new tab)

  14. Improved haptic fidelity via reduced sampling period with an FPGA-based real-time hardware platform

    … fidelity of their implementation necessitates high virtual stiffness integrated with passive device behavior. An energy-based approach to system passivity for a unilateral, virtual spring is derived. The work addresses the issue of sampling rate; derivations reveal that increasing control loop …

    rice Repository record for Improved haptic fidelity via reduced sampling period with an FPGA-based real-time hardware platform (opens in a new tab)

  15. Photonic analog-to-digital coonversion using a robust symmetrical number system

    … with an optical infrastructure that offers high bandwidth and low insertion loss characteristics. A full implementation was constructed and tested. The lack of a high-speed data acquisition device limited the results to examining the preprocessing and digital processing separately. With the …

    nps Repository record for Photonic analog-to-digital coonversion using a robust symmetrical number system (opens in a new tab)

  16. Determination of knock sensor location on a John Deere 6076 natural gas engine

    … amplitudes of the knock-induced vibrations are high enough to use in a knock control system. To find this location, six piezoelectric knock sensors were located on various stiff portions of the engine block. Data were collected from the sensors at both knocking and non-knocking conditions using …

    iastate Repository record for Determination of knock sensor location on a John Deere 6076 natural gas engine (opens in a new tab)

  17. STUDY OF PRESSURE TRANSIENTS IN PIPE LINES

    … numerical results show good agreement with those data that were obtained experimentally. The experiments were carried out on a 2m long vertical pipe with two sensitive pressure transducers fitted at both ends. The pressure transients in the test pipe were effected by an electrically actuated …

    nus Repository record for STUDY OF PRESSURE TRANSIENTS IN PIPE LINES (opens in a new tab) Download file for STUDY OF PRESSURE TRANSIENTS IN PIPE LINES (opens in a new tab)

  18. Combustion of High Reactivity Methyl Oleate and Low Reactivity n-Butanol in a Stratified Reactivity Controlled Compression Ignition Engine

    … with piezoelectric pressure transducers and high-speed data acquisition equipment and tested using a hydraulic brake dynamometer for load control. Data from both the blends and ULSD#2 was collected when the engine was steadily run at 1500 RPM and 4 to 6 bar IMEP. Emissions were recorded using …

    gsu Repository record for Combustion of High Reactivity Methyl Oleate and Low Reactivity n-Butanol in a Stratified Reactivity Controlled Compression Ignition Engine (opens in a new tab)

  19. Drop Impact Reliability Testing Lead-Free Chip Scale Packages

    … observed by each system. To enable this study a high-speed data acquisition system, capable of in-situ detection of transitional solder interconnect failure, was developed at Cal Poly for drop impact reliability testing. Edge-bonding is shown to significantly improve drop impact reliability of …

    calpoly Repository record for Drop Impact Reliability Testing Lead-Free Chip Scale Packages (opens in a new tab)

  20. Heat Release Analysis and Modeling for a Common-Rail Diesel Engine

    … empirical formulas based on the experimental data.</p> <p>A Fiat 2.4Liter common rail engine was used in the tests. A rotary incremental encoder with 0.1° resolution was coupled to the crankshaft pulley with a special adapter. The engine was operated at a number of different speeds and load …

    ut-knoxville Repository record for Heat Release Analysis and Modeling for a Common-Rail Diesel Engine (opens in a new tab)

Page 1 of 3