Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 856 for “"High strain"”.

  1. High strain deformation of steels

    … which occur when metals are deformed to high strains by cold working are summarised from the published literature, with particular emphasis on the behaviour of iron. In addition to this, the effects of second phase particles, the deformation behaviour during machining and the influence of …

    whiterose Download PDF for High strain deformation of steels (opens in a new tab)

  2. High strain rate properties of structural aluminium.

    … been used in the past to determine the stress-strain relationship of metals and alloys at high strain rates of up to 2.2 x 10 per second; some of these were approximate whilst others required expensive equipment. In the present study three aluminium alloys, HE15, HE30TF and DTD5044 have been …

    sheffield-hallam Download PDF for High strain rate properties of structural aluminium. (opens in a new tab)

  3. Hard Rocks Under High Strain-Rate Loading

    … describing the behavior of geomaterials under high strain-rate loading conditions are essential for a better understanding and enhanced designs of dynamic applications. Some attempts have been made to measure dynamic properties of rocks. Also, some trials have been made to devise material …

    queens Repository record for Hard Rocks Under High Strain-Rate Loading (opens in a new tab)

  4. High strain rate studies of armor materials

    This thesis focuses on the high strain rate behavior of Maraging steel 300, High Hardness Armor (HHA) and Aluminum 5083 – H131 Alloy. These materials are used by the Department of National Defense (DND) of Canada as armor plate materials in military applications. The aim of the research is to …

    manitoba Repository record for High strain rate studies of armor materials (opens in a new tab)

  5. Development and characterization of high-strain electrodes

    … electrical conductivity under mechanical strains of 30%. The third, "High-Strain, High-Conductivity Photopatternable Electrodes," explored a modification to this fabrication method that yielded a dramatic improvement in performance: an electrical conductivity of 50 S/cm, mechanical strains …

    maryland Repository record for Development and characterization of high-strain electrodes (opens in a new tab)

  6. High strain rate constitutive equation for metallic materials

    … and flow stress increase significantly with strain rate. High speed Forming and Machining operation gives rise to strain rates varying from 10 to 10^ per second. A number of research work have been reported in which various techniques have been described for strain rates sensitivity. One of …

    dcu Download PDF for High strain rate constitutive equation for metallic materials (opens in a new tab)

  7. High Strain Rate Impact Response of Polymeric Materials

    … conductivity, which render their response highly rate-dependent and susceptible to adiabatic heating. At hypervelocity strain rates exceeding 106 s-1, inertial effects, shock waves, and localized thermal softening dominate failure. This dissertation employs the Laser-Induced Projectile …

    tamu Repository record for High Strain Rate Impact Response of Polymeric Materials (opens in a new tab) Embargoed until 2028-05-01

  8. High Strain Rate Impact Response of Polymeric Materials

    … conductivity, which render their response highly rate-dependent and susceptible to adiabatic heating. At hypervelocity strain rates exceeding 106 s-1, inertial effects, shock waves, and localized thermal softening dominate failure. This dissertation employs the Laser-Induced Projectile …

    tamu Repository record for High Strain Rate Impact Response of Polymeric Materials (opens in a new tab) Embargoed until 2028-05-01

  9. High Strain Rate Impact Response of Polymeric Materials

    … conductivity, which render their response highly rate-dependent and susceptible to adiabatic heating. At hypervelocity strain rates exceeding 106 s-1, inertial effects, shock waves, and localized thermal softening dominate failure. This dissertation employs the Laser-Induced Projectile …

    tamu Repository record for High Strain Rate Impact Response of Polymeric Materials (opens in a new tab) Embargoed until 2028-05-01

  10. HIGH STRAIN RATE MEASUREMENTS FOR PREDICTING BRAIN TRAUMA

    Soft, high-speed sensors are crucial for real-time detection of mechanical de-formation in brain-like materials, particularly in studying mild traumatic brain injury (mTBI). This work presents the design, fabrication, and validation of stretchable optical fiber sensors using thermoplastic …

    cornell Repository record for HIGH STRAIN RATE MEASUREMENTS FOR PREDICTING BRAIN TRAUMA (opens in a new tab)

  11. On the response of rubbers at high strain rates

    … wave propagation experiments were conducted at high strain-rates by holding one end fixed and displacing the other end at a constant velocity. A high-speed video camera was used to monitor the motion and to determine the evolution of strain and particle velocity in rubber strips. Analysis of the …

    texas Repository record for On the response of rubbers at high strain rates (opens in a new tab)

  12. High Strain Rate Characterization of Advanced High Strength Steels

    … has considered the characterization of the high strain rate constitutive response of three steels: a drawing quality steel (DDQ), a high strength low alloy steel (HSLA350), and a dual phase steel (DP600). The stress-strain response of these steels were measured at seven strain rates between …

    waterloo Repository record for High Strain Rate Characterization of Advanced High Strength Steels (opens in a new tab)

  13. High strain rate behavior of graphene reinforced polyurethane composites

    … composites (GR/PU) at high strain rates ranging from approximately 1500 s-1 to 5000 s-1. Four types of GR/PU composites with different GR contents: 0.25% GR, 0.5% GR. 0.75% GR and 1 % GR were prepared by the solution mixing method, and divided into two groups of unheated …

    missouri Repository record for High strain rate behavior of graphene reinforced polyurethane composites (opens in a new tab)

  14. Dynamic Shear Bands in Metals under High Strain Rates

    … applications. Analysis of these localizations highly depends on the selection of the constitutive model. Hence, two constitutive models that take temperature and strain rate effect into account are proposed. The first model is a physically based model that depends on basic physical quantities, …

    lsu-thes Repository record for Dynamic Shear Bands in Metals under High Strain Rates (opens in a new tab)

  15. Characteristics of Reinforced Concrete Bond at High Strain Rates

    … ignored in the literature is the effect of high strain rates on the bond between reinforcing steel and the surrounding concrete. Therefore, a comprehensive research program was undertaken to establish the effect of high strain rates on reinforced concrete bond. The experimental research …

    ottawa-retro Repository record for Characteristics of Reinforced Concrete Bond at High Strain Rates (opens in a new tab)

  16. High strain rate, high temperature deformation of stainless steel.

    In order to clarify the dependence of strain localisation on different parameters, a literature survey is presented covering the theory and observations of instability formation during deformation, dynamic recovery processes, mechanical testing, adiabatic heating and shear band formation. Several …

    whiterose Download PDF for High strain rate, high temperature deformation of stainless steel. (opens in a new tab)

Page 1 of 43