Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"High temperature chemistry"”.
-
High-Temperature Chemistry of Polypropylene Pyrolysis: Millisecond Reaction Kinetics and Visualization
… of a material in an inert atmosphere, is a high-potential technology to help enable a circular plastic economy. Currently, the fundamental understanding of plastic pyrolysis is limited but will be essential for the development of industrially relevant waste management solutions. The …
-
Engine spray combustion modeling using unified spray model with dynamic mesh refinement
… model was used to simulate the overall low and high temperature chemistry. The simulation results were compared with the experimental data with good agreement. The combination of combustion and spray models along with the dynamic mesh refinement was also validated using experimental data …
-
Mapping of Ice and Gas on 1000 AU Scales
… of methanol ice formation. Proof was found of high-temperature chemistry forming water in the warm postshock gas of YSOs. In this same region it was found that up to 99% of the methanol is being destroyed as it is sputtered from the surfaces of dust grains into the gas phase. A novel analysis …
-
The characterisation of some high temperature molecules using matrix isolation
… of previous applications of matrix isolation to high temperature chemistry. The experimental apparatus used in this work is described and the method of analysing vibrational spectra is given. Isotopic substitution is shown to be a powerful aid to spectral interpretation and was extensively used. …
-
A study of Cool Diffusion Flames utilizing Ignition Delay Characteristics of N-Heptane Autoignition Simulations
… resources due to the need for detailed chemistry and transport resolution. To circumvent these challenges, this study utilizes an alternative approach using Cantera autoignition simulations, which presumes isobaric, adiabatic conditions. The fuel, n-heptane, is analyzed through six …
-
Experimental and theoretical studies into the laser pyrolytic formation of chlorinated polycyclic aromatic hydrocarbons and fullerene precursors.
… incinerators, as a byproduct. Close study of the high temperature chemistry of chlorohydrocarbons may aid both the mitigation of hazardous byproducts and implementation of more effective fullerene synthesis techniques. To this end, we have studied the formation mechanisms of dichloromethane …
-
Ignition and Flame Stabilization in n-Dodecane Turbulent Premixed Flames at Compression Ignition Engine Conditions
… Combustion Network’s n-dodecane Spray A flame (temperature of 813 K, pressure of 60 atm, equivalence ratio of 1.3, and with 15% vol. O2 in the ambient gas). Inflow velocities 4 to 16 times larger than the laminar flame speed are considered. As a result, in the absence of turbulence, ignition and …
-
High temperature reactions of chloroform with methane
… were studied at atmospheric pressure in the temperature range of 550-800 deg C, and using three different reactor diameters.</p> <p>The reaction was found to follow pseudo-first order kinetics in the presence of excess Methane and Argon, and the kinetic parameters were determined for each of …
-
High temperature reactions of 1,2-dichloroethane with water vapor in a tubular reactor
… molar ratio of water to l,2-dichloroethane very high (55:l), the rate of decomposition of 1,2-dichloroethane is of the first order. A plot of ln(C/C<sub>O</sub>) versus t results in a straight line through the origin with a slope of k<sub>a</sub>. Performing this procedure at more than one …
-
An elementary reaction model for thermal decomposition of CF2Cl2 in a H2 atmosphere and experimental studies on oxidation of CH3OH plus CH4 under fuel rich, stoichiometric and fuel lean conditions
… atoms by atomic hydrogen is slow at the temperatures of this study. A small mechanism, about 35 elementary reaction steps, and a thermodynamic data base were developed to model the reaction system. Agreement of the mechanism with the data at varied time and temperature is reasonable. Rate …
-
Thermodynamics of 3+ metal cation containing systems
… and gadolinium have been measured at the temperatures 288.15, 298.15, 313.5 and 328.15 K. Using the density and massic heat capacity data, apparent molar volumes and apparent molar heat capacities have been calculated. These data have been modeled using the Pitzer ion interaction approach …
-
A Shock Tube Study of NCN and HCO Radical Reactions Related to the NOx Formation in Combustion Processes
… been directly measured at combustion relevant temperatures behind shock waves. Nitrogen oxides (NO and NO2, together: NOx) are main pollutants of combustion processes. One of several pathways yielding NOx involves the cyanonitrene (NCN) radicals as a key intermediate. In order to optimise …
-
Thermodynamics of aqueous solutions
… This thesis also attempts to model the temperature, pressure, and concentration dependencies of the reported apparent molar properties of each system investigated using an equation of state commonly referred to as the density model. Where possible, the results of this model have been …
-
Gas-phase reactions of methylene chloride and methylene chloride-trichloroethylene mixture with methane in tubular flow reactor and atmospheric pressure
… and 16 mm ID , atmospheric pressure and over a temperature range of 750-1000 C. Experiments were conducted isothermally, +/-5 C over central 80% of oven length using a three zone oven. Argon was added as a diluent in order to limit carbon (s) formation. The concentration ratios of methylene …
-
Reaction of hydrogen with methylene chloride and carbon tetrachloride at high temperature
… and carbon tetrachloride in hydrogen in the temperature range 500 - 1000° C were studied using tubular flow reactors of three diameters. (ID: 0.40, 1.05, 1.60 cm). Residence time range was from 0.3 to 3.5 seconds. Temperature profiles of the reactors was kept within +/- 5° C of central 85% …
-
Characterization of porous nickel titanium produced by self-propagating high temperature synthesis for use in biomedical applications
Includes bibliographical references (pages 143-151).
-
Laser Absorption Measurements of HCl in a Shock Tube for the Chemical Kinetics Study of Rocket Propellants
… will create combustion-like conditions with temperatures of interest in realistic applications, namely between 1500 and 4000 K. An Interband Cascade Laser enabling mid-infrared laser absorption spectroscopy is a powerful tool for highly selective and sensitive measurements. Throughout the …
-
Production of ceramic powders using auto-ignition combustion synthesis (AICS) for use in actinide bearing nitride ceramic nuclear fuels
Includes bibliographical references (pages 74-79).
Page 1 of 2