Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 127 for “"High-Enthalpy"”.

  1. Aero-Optical Effects in High-Enthalpy Flows

    … has predominantly focused on low-speed or low-enthalpy applications where perfect gas assumptions hold, this work investigates the influence of real gas effects and thermal nonequilibrium in high-enthalpy hypersonic flows. High-fidelity Computational Fluid Dynamics (CFD) simulations are …

    arizona-thes Repository record for Aero-Optical Effects in High-Enthalpy Flows (opens in a new tab)

  2. Laminar-turbulent transition in high-enthalpy boundary layers

    … hypersonic vehicles. These effects intensify in high-enthalpy environments where chemical and vibrational nonequilibrium significantly influence the aerothermal response. This thesis investigates the emergence of second-mode instabilities, known as \textit{Mack modes}, using Linear Stability …

    soton Repository record for Laminar-turbulent transition in high-enthalpy boundary layers (opens in a new tab) Download PDF for Laminar-turbulent transition in high-enthalpy boundary layers (opens in a new tab)

  3. Sizing Wind Tunnel Heater For High Enthalpy Conditions

    … blowdown supersonic wind tunnel to unlock new high-enthalpy test applications, considering cost and power requirements at a variety of different states. This process includes both modeling the current range of test section properties in Cal Poly's blowdown wind tunnel and determining the new …

    calpoly Repository record for Sizing Wind Tunnel Heater For High Enthalpy Conditions (opens in a new tab)

  4. Computational Studies of Hypersonic High Enthalpy Separated Flows

    Hypersonic high enthalpy separated flows over two configurations, a rearward facing step and a compression corner were numerically investigated using computational fluid dynamics (CFD). Separated flow over the rearward facing step was studied at two enthalpies, 26 MJ/kg and 50 MJ/kg, corresponding …

    unsw Repository record for Computational Studies of Hypersonic High Enthalpy Separated Flows (opens in a new tab)

  5. The aerodynamics of turbomachines for high–enthalpy gas heating

    … 10% of the global energy demand is attributed to high-temperature industrial processes such as steel, cement, and petrochemicals production. More than 90% of this thermal energy originates directly from the combustion of fossil fuels, leading to a staggering 30% of the global anthropogenic …

    oxford Restricted access

  6. Computational Analysis of Hypersonic Mach Stems at High Enthalpy

    High-fidelity computational fluid dynamics simulations are imperative to understanding the complex physics of hypersonic flight. Of the many complex flow fields in hypersonic flows, Mach stems are a particular area of interest because they represent an ideal canonical flow without the added …

    tamu Repository record for Computational Analysis of Hypersonic Mach Stems at High Enthalpy (opens in a new tab)

  7. Experimental Investigation of Hypersonic Turbulence Around High Enthalpy Mach Reflections

    … and characterization of a new large-scale, high enthalpy ground testing facility called the Hypervelocity Expansion Tunnel (HXT) within the National Aerothermochemistry and Hypersoncis Laboratory at Texas A&M University. Capable of generating freestream flows with flight-matched temperatures …

    tamu Repository record for Experimental Investigation of Hypersonic Turbulence Around High Enthalpy Mach Reflections (opens in a new tab)

  8. Cross-Flow, Staggered-Tube Heat Exchanger Analysis for High Enthalpy Flows

    … there have been no correlations done for very high enthalpy flows as produced by Arnold Engineering Development Center’s (AEDC) H2 facility. The H2 facility uses a direct current electric arc to heat air which is then expanded through a converging-diverging nozzle to impart a supersonic …

    ut-knoxville Repository record for Cross-Flow, Staggered-Tube Heat Exchanger Analysis for High Enthalpy Flows (opens in a new tab)

  9. The Design and Development of a High Enthalpy, Hypervelocity Expansion Facility

    … shock and expansion processes to introduce enthalpy and kinetic energy into gaseous flows, offer a unique and brief view into true flight-like environments. Under Navy support, Texas A&M University is developing a new large-scale (1.0 m exit diameter) hypervelocity research tunnel (HXT). The …

    tamu Repository record for The Design and Development of a High Enthalpy, Hypervelocity Expansion Facility (opens in a new tab)

  10. Diode laser spectroscopy for high-enthalpy facility and hypersonic flight characterisation

    … of the flow is measured at two different enthalpy conditions and the results are compared with the corresponding simulated values. The sensor is also proposed as a non-intrusive driver gas detector convenient for free-piston shock tunnels. Its effectiveness as a driver gas sensor is …

    unsw Repository record for Diode laser spectroscopy for high-enthalpy facility and hypersonic flight characterisation (opens in a new tab)

  11. Modeling of Test Section Conditions in a High Enthalpy Flow Facility

    … or SWR, at the University of Washington is a high enthalpy flow facility capable of a wide range of test conditions. In this study, an analytical model has been prepared using MATLAB in an effort to predict the envelope of test conditions of which the SWR is capable for a given range of input …

    washington Repository record for Modeling of Test Section Conditions in a High Enthalpy Flow Facility (opens in a new tab)

  12. Development of a high-enthalpy ground test facility for shock-layer radiation

    … details the establishment of a new, transient, high-enthalpy aerothermodynamic ground test facility at the University of Oxford: the T6 Stalker Tunnel. T6 is capable of operating as an expansion tube, reflected shock tunnel or in one of two high-enthalpy shock tube modes. This new facility was …

    oxford Repository record for Development of a high-enthalpy ground test facility for shock-layer radiation (opens in a new tab)

  13. High-fidelity modeling of high-enthalpy plasma wind tunnels for hypersonic testing

    … presents the development and application of a high-fidelity, multiphysics computational framework for modeling Inductively Coupled Plasma (ICP) wind tunnels, with a particular focus on the Plasmatron X facility at the University of Illinois Urbana-Champaign. The integrated multi-solver approach …

    uiuc Repository record for High-fidelity modeling of high-enthalpy plasma wind tunnels for hypersonic testing (opens in a new tab)

  14. High enthalpy Effects on two boundary layer disturbances in supersonic and hypersonic flow.

    … to vehicle design cannot be understated. The high enthalpy environment in which high speed vehicles operate in further complicates the transition process by adding several more degrees of freedom. In this environment, the internal properties of the gas can stabilize or destabilize the boundary …

    umn Repository record for High enthalpy Effects on two boundary layer disturbances in supersonic and hypersonic flow. (opens in a new tab)

  15. Optical studies of leading-edge separation in high-enthalpy, low-density hypersonic flows

    … mark shaped body in a hypersonic flow with total enthalpy of 11:3 MJ=kg and freestream density of 2:1 g=m3, and around a 30° wedge in a hypersonic flow with total enthalpy of 3:1 MJ=kg and freestream density of 6:4 g=m3. The temperature was measured with multi-line planar laser induced …

    unsw Repository record for Optical studies of leading-edge separation in high-enthalpy, low-density hypersonic flows (opens in a new tab)

  16. Designing A Shock Tunnel To Enable High Enthalpy Experimental Investigation Of Hypersonic Flows

    … of a shock tunnel facility, utilizing existing high-pressure pipes within the UWAA department. The research aims to elucidate the trade-offs between Reynolds number, enthalpy, and test time across a range of configurations. The methodology involves using the WISTL shock tube code from the …

    washington Repository record for Designing A Shock Tunnel To Enable High Enthalpy Experimental Investigation Of Hypersonic Flows (opens in a new tab)

  17. A Study of Direct Measuring Skin Friction Gages for High Enthalpy Flow Applications

    … gage for applications in three-dimensional, high-speed, high-enthalpy flows. Design conditions required favorable gage performance in the Arc-Heated Facilities at Arnold Engineering Development Center. Flow conditions are expected to be at Mach 3.4, with convective heat properties of h= 1,500 …

    vt Repository record for A Study of Direct Measuring Skin Friction Gages for High Enthalpy Flow Applications (opens in a new tab)

Page 1 of 7