Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 33 for “"High-K materials"”.
-
Modeling Leakage Currents in Metal Insulator Metal Structures with High K Materials
… cellular phones and mobile devices require high speed and low power consumption. Such improvements have been attained by minimizing physical dimensions of electronic devices, leading to high density integration of transistors and capacitors on integrated chips (]Cs). However, as a …
-
An investigation of high-k materials in metal-insulator-metal capacitor structures
… technology utilises low dielectric constant (k) materials (k~3.9 - 7), these materials achieve the required electrical properties of high electric field breakdown strength and minimal leakage current. The low k value of the current materials presents a challenge to development of many new …
-
Gate current modeling through high-k materials and compact modeling of gate capacitance
High dielectric constant materials are expected to replace SiO2 when the direct tunneling currents become intolerable for circuit design considerations. These dielectrics exhibit a trend of decreasing barrier height with increasing dielectric constant and hence the performance trade offs of …
-
Fabrication & electrical characterization of SiGe nanocrystal flash memory devices embedded in high k dielectrics
… efficiency and to improve retention, thick high-k materials is an alternate solution. In this research deposition of SiGe nanocrystals on SiO2 and HfO2 substrates was studied. Analysis indicated that nucleation of Ge takes place preferentially on pre-nucleated Si. Transistors with SiGe …
-
Interaction of molecular contaminants with high-k dielectric surfaces
… and have to be replaced by thicker films of a high-k dielectric material. Among the high-k materials, hafnium oxide (HfO₂) and zirconium oxide (ZrO₂) are the most promising candidates. Molecular contamination can affect the quality of the new gate dielectric films in a manner similar to …
-
Approaches to Optimize High-k Dielectrics for Silicon Carbide Devices
… become a limiting factor in the development of high-performance devices. This can be overcome by replacing SiO2 (dielectric constant k = 3.9) with materials with higher dielectric constant. However, pure high-k materials are unsuitable as they typically crystallize at low temperatures and …
-
Investigation of different dielectric materials as gate insulator for MOSFETs
… with a physically thicker oxide layer of high-k materials like Hafnium oxide and Titanium oxide. High-k dielectric materials allow the capacitance to increase without a huge leakage current. Hafnium oxide and Titanium oxide films are deposited by reactive magnetron sputtering from Hafnium …
-
Thin Film Integrated Capacitors with Sputtered-Anodized Niobium Pentoxide Dielectric for Decoupling Applications
… system miniaturization is a major driver for high-k materials. High-k materials in capacitors allow for high capacitance, enabling system miniaturization. Ta2O5 (k~24) has been the dominant high-k material in the electronic industry for decoupling capacitors, filter capacitors, etc. In order …
-
High dielectric constant materials in SONOS-type non- volatile memory structures
… work entails finding innovative solutions, using high dielectric constant (high-K) materials, to overcome the limitations of the conventional floating gate structure as a result of rapidly shrinking device geometries. The conventional method to increase the programming speed and to lower the …
-
High-K Based Non-Volatile Memory Devices with the Light Emitting Application
The zirconium-doped hafnium oxide (ZrHfO) high-k gate dielectric films with and without the embedded nanocrystals have been studied for the applications of the nonvolatile memory and light emitting devices. By replacing the polycrystalline Si with the novel discrete nanocrystal embedded high-k …
-
Study on application of high-K dielectric materials for discrete charge storage memory
… investigated: formation of NCs, application of high-k dielectric materials for NCs memory and SONOS type memory device, and optimization of the SONOS cell structure. Self-assembled Ge NCs are formed on HfO2 and HfAlO by CVD and by cosputtering method. The Ge NCs are thermally stable in HfAlO …
-
Alternative gate dielectrics and application in nanocrystal memory
… (Ge) nanocrystal memory structures, employing high dielectric constant (high-k) materials to replace the tunnel oxide and capping oxide (control oxide) layers, was investigated. It was found that faster charging rate and better charge retention performance could be obtained with a high-k tunnel …
-
Surface and interface characterisation of high-k dielectric materials on silicon and III-V semiconductor substrates
Interface formation between high-k dielectric oxide materials and semiconductor surfaces is of critical importance to the development of the next generation of high speed semiconductor devices. This thesis investigates the deposition and characterisation of a range of candidate high-k materials on …
-
Temperature control and characterization of silicon-germanium growth by rapid thermal chemical vapor deposition
… mechanism is utilized to form dots on dielectric materials including high k materials.
-
An evaluation of the electrical, material, and reliability characteristics and process viability of ZrO₂ and ZrOxNy for future generation MOS gate dielectric
… processes and tools and the introduction of new materials have facilitated the rapid downscaling of metaloxide-semiconductor (MOS) technology. The 90 nm technology node and beyond will face one of the toughest challenges of the semiconductor industry – the replacement of conventional silicon …
-
New Concepts for Functional 0-3 Nanocomposites and Magnetic Field Sensors
… Aiming at functional 0-3 nanocomposites for high-k and magnetoelectric (ME) materials, aluminum nitride (AlN) is chosen as the matrix and cobalt (Co) for the particulate phase. Suitable deposition processes for the individual composite constituents are developed and the resulting …
-
Characterisation of charge carrier defects in high-dielectric-metal-gate and thin film transistor devices
… application either as a switch or amplifier in high and low power electronic devices. In both sectors, devices rely on the availability of a good insulator layer for achieving desirable performance. The traditional CMOS transistors with Silicon (Si) semiconductor and SiO2 gate insulator has …
-
MOCVD of high-K ceramic thin films for the Gbit DRAM technology
… an error free logic state recognition leads to high-k materials. (Ba,Sr)TiO3 is the most promising of these new materials, since it offers a high relative permittivity combined with low leakage. Deposition of BST via MOCVD is considered to be the method of choice for thin films in view of DRAM …
-
Evaluation of nitrogen incorporation effects in HfO₂ gate dielectric for improved MOSFET performance
… excessive due to direct tunneling. Thus, high-k dielectric, which has a higher dielectric constant than SiO2, has been intensively studied for future I.C. application. Among various high-k dielectrics, HfO2 is considered to be the most promising candidate because it has a high dielectric …
-
III-V channel MOS devices with atomic-layer-deposited high-k gate dielectrics : interface and carrier transport studies
… for so-called technology boosters involving new materials for the gate dielectric and the channel as well as innovative structures. Theoretical studies suggest that the incorporation of high-mobility channel materials such as germanium and III-Vs could outperform bulk Si technology in terms of …
Page 1 of 2