Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"High-current stress"”.
-
Reducing stress in power amplifiers: trapezoidal current shape with multilevel topology
… power amplifiers have the disadvantage of high current stress on power components. High output current and resonant operation can result in high peak currents and high di/dt, compromising reliability. This paper proposes a technique using multilevel topology with the flying capacitor as …
-
Investigation of system-level ESD-induced failures
… operation of systems. ESD is a short duration, high current stress which can cause the permanent failure of a system or temporary glitches in a system. Soft failures include any recoverable system malfunction, from resets to loss of stored data. They can be caused by noise entering signal pins …
-
Investigation of system-level ESD induced soft failures
… of systems during operation. ESD is a brief, high-current stress that when applied to a functional system, can cause a variety of problems ranging from temporary system malfunction to permanent failure of components within the system and/or the system itself. Permanent failure of components, …
-
Device Layout Techniques for RF Performance Enhancement on SiGe HBTs for Future Generation BiCMOS Technology
… 1dB compression point (P1dB) (by 9%), and higher power-added-efficiency (PAE) (by 1.3%), and increased transducer gain (by 4.7%) using only layout optimization, with only a slight degradation of 4.5% in maximum available gain (MAG), and 8% in fT. The candidate device layouts presented can …
-
Analysis and Design of High Efficiency Grid-to-Vehicle (G2V) Plug-in Chargers for Local e-Transportation
… unity power factor (UPF) operation leading to high total harmonic distortion (THD) and poor input power quality at the input. Thus active power factor correction (PFC) becomes a vital constituent in AC-DC converters. By understanding the constraints posed by continuous current mode (CCM) based …
-
Understanding the physics of hard and soft failure in silicon-germanium heterojunction bipolar transistors
… multiplication, breakdown mechanisms, and base current reversal are briefly discussed to provide some insight on the physics of failure in later chapters. Chapter 2 provides an overview of the reliability physics of SiGe HBTs. The damage spectrum of the SiGe HBT is introduced in order to …
-
Advancing SiGe HBT Performance: A Study on RF-SOA Prediction, BEOL Engineering, and Layout-Driven Reliability Optimization
… bipolar transistors (HBTs) are key enablers of high-frequency circuits in modern BiCMOS technology. However, their performance is often constrained by conservative reliability guidelines, limiting both DC and RF safe operating areas (SOA) and overall efficiency. This work explores the impact of …
-
Measurement and testing of IGBTs under high heat flux
High current devices such as IGBTs (Insulated Gate Bipolar Transistors) generate a great deal of heat during the application of high current levels. This issue is exacerbated when IGBTs are used as high-speed switching devices in power systems where switching takes place at high voltage and high …