Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 111 for “"Hold time"”.

  1. Protecting digital circuits against hold time violations due to process variations

    … on-chip para caracterizar violações de tempo de hold de flip-flops em caminhos lógicos curtos, que são geradas por incertezas de borda de relógio em projetos síncronos. Usando um circuito programável preciso de geração de skew de relógio, uma resolução de medida de ~1ps é alcançada para emular …

    brazil-ufrgs Repository record for Protecting digital circuits against hold time violations due to process variations (opens in a new tab)

  2. High-Temperature Low-Cycle-Fatigue and Crack-Growth Behaviors of Three Superalloys: HASTELLOY ® X, HAYNES ® 230, and HAYNES ® 188

    … at Westmoreland Testing Inc. and UT. Various hold times were imposed at the maximum strain or load in both the LCF and FCG tests, respectively, to investigate the hold-time effect. For the LCF tests, the influence of the total strain range and hold time on the cyclic stress response was …

    utk-theses Repository record for High-Temperature Low-Cycle-Fatigue and Crack-Growth Behaviors of Three Superalloys: HASTELLOY ® X, HAYNES ® 230, and HAYNES ® 188 (opens in a new tab)

  3. The settling behavior of the carbon based gas diffusion layer in PEM fuel cells

    … the first with 10 cycle loading, with the load hold time of 60 s. The second test was a 10 cycle loading test as well, but with the load hold time of 60 min. The third test was a 50 cycle loading, with 60 s hold. Images in a Sweeping Electron Microscope was also taken, to evaluate the fiber …

    chalmers Repository record for The settling behavior of the carbon based gas diffusion layer in PEM fuel cells (opens in a new tab)

  4. Effect of cheese age on sauces made from process cheese loaves and comparison of methods used to measure sauce viscosity

    … (Brookfield, RVA, and MVAG) at the initial time point as well as after 2 hours and 4 hours of hold time at 70°C. Significant differences (P<0.05) in sauce viscosity were found between the cheese blend age treatments for all time points. Increases in sauce viscosity was observed for all …

    umn Repository record for Effect of cheese age on sauces made from process cheese loaves and comparison of methods used to measure sauce viscosity (opens in a new tab)

  5. Techniques for enumerating protozoa in saturated subsurface sediments

    … collected to investigated the variability of the hold time of cores, total and encysted protozoan populations (MPN techniques only), and sites.The population estimates changed significantly (with 95% confidence) from 1 to 28 days hold time: 1.22 $\times$ 10$\sp4$ to 7.71 $\times$ 10$\sp3$ …

    unh-thes Repository record for Techniques for enumerating protozoa in saturated subsurface sediments (opens in a new tab)

  6. Residual Stresses in Cast Iron

    … stress to be fully relieved when reaching the hold temperature of 610 °C, this have been confirmed to be wrong shown by the significant effect of hold time in all investigated materials. The effects of varying cooling rates and drop temperatures are also difficult for the simulations to …

    chalmers Repository record for Residual Stresses in Cast Iron (opens in a new tab)

  7. Strain-induced precipitation during the thermomechanical processing of AA6111 alloy

    … Accordingly, the effect of inter-pass time during thermomechanical processing of AA61111 on flow behaviour and microstructure evolution has been investigated. This was achieved using plane strain compression testing undertaken on the Sheffield Thermomechanical Compression (TMC) …

    whiterose Download PDF for Strain-induced precipitation during the thermomechanical processing of AA6111 alloy (opens in a new tab)

  8. Effects of water temperature and skin exposure on underwater breath-holding and subsequent minute ventilation

    … and water temperature on underwater breath-hold time and subsequent minute ventilation. Twelve subjects (2 female) were studied in 8 and 20°C water while wearing a helicopter transport suit with a dive mask. At each temperature, subjects performed a maximum breath-hold and then breathed for …

    manitoba Repository record for Effects of water temperature and skin exposure on underwater breath-holding and subsequent minute ventilation (opens in a new tab)

  9. Creep-Fatigue Interaction of Notched 304 Stainless Steel Bars

    … to constant load creep, cyclic loading with hold-time and fatigue loadings at 650(DEGREES)C to determine the lives, failure modes and to understand creep-fatigue interaction mechanisms. The hold-times are one minute and ten minutes. Double-notch specimens were used so that the material under …

    uiuc Repository record for Creep-Fatigue Interaction of Notched 304 Stainless Steel Bars (opens in a new tab)

  10. A Study of the Sintering Behaviour of Ni-Ti Powder Compacts Using Differential Scanning Calorimetry

    … effects due to powder size, peak temperature and hold time were studied in situ using DSC, which allowed for a number of qualitative and quantitative relationships to be developed. In studying the eutectoid decomposition of β-Ti using DSC, a simple model was developed (Eq. 4-7) to relate the …

    waterloo Repository record for A Study of the Sintering Behaviour of Ni-Ti Powder Compacts Using Differential Scanning Calorimetry (opens in a new tab)

  11. Optimization and automation of a thermal oyster shucking process

    … second steam injection followed by a 60 second hold time and 120 seconds of ice water bath. This treatment proved exceptional overall with shelf stability over 14 days, an overall Average Release Value of 1.18 and an overall Quality of 1.86, both of which are good. A second treatment consisting …

    lsu-thes Repository record for Optimization and automation of a thermal oyster shucking process (opens in a new tab)

  12. A Novel Inhalation Chamber Design: Improving the User-Friendliness of Asthma Medication for Children of the Age 3-6 years

    … an inhalation aid called a Spacer or Valved Holding Chamber is used. With use of the spacer the medication can be inhaled in controlled and slow manner. The purpose of this thesis is to develop a new children spacer design which is more portable and encouraging than the four currently …

    chalmers Repository record for A Novel Inhalation Chamber Design: Improving the User-Friendliness of Asthma Medication for Children of the Age 3-6 years (opens in a new tab)

  13. Fatigue and Fracture Behavior of High Strength and High Conductivity Copper Alloys for High Heat Flux Applications

    … Fatigue lives were reduced notably with hold time even at room temperature. Hold times are most damaging at low strain ranges and long fatigue lives. This effect was observed with hold periods as short as 10 seconds. Analysis revealed that the stress relaxation behavior during hold is …

    uiuc Repository record for Fatigue and Fracture Behavior of High Strength and High Conductivity Copper Alloys for High Heat Flux Applications (opens in a new tab)

  14. Pyrolysis of Fine Coal Particles at High Heating Rate and Pressure

    … reason the volatile yield (VY) results for 10 s hold-time at b1.7 wt% daf of coal, is much more reproducible than 1 s hold-time experiments at b4.2 wt% daf of coal. Four coals of the same rank did not behave identically when heated. Three of the coals had a pyrolysis VY the same as the proximate …

    unsw Repository record for Pyrolysis of Fine Coal Particles at High Heating Rate and Pressure (opens in a new tab)

  15. Crack Growth Behavior Under Creep-Fatigue Conditions Using Compact and Double Edge Notch Tension-Compression Specimens

    … on 9Cr-1Mo (P91) steels at 625°C with various hold times. These tests were conducted using C(T) specimens under constant load amplitude conditions (tension-tension) and DEN(T-C) specimens under displacement like conditions (tension-compression). Crack growth data generated under creep-fatigue …

    arkansas Repository record for Crack Growth Behavior Under Creep-Fatigue Conditions Using Compact and Double Edge Notch Tension-Compression Specimens (opens in a new tab)

  16. Optimisation of brewer’s spent grain biochar synthesis for remediation of emerging contaminants from water

    … screening design of experiments, we found that hold temperature and hold time were the only factors of statistical significance, but washing with the chemical activating agent hydrochloric acid was required to alter the surface chemistry of the materials. The optimal synthesis conditions for the …

    strathclyde Repository record for Optimisation of brewer’s spent grain biochar synthesis for remediation of emerging contaminants from water (opens in a new tab)

  17. Design, Fabrication, and Testing of a Dielectric Elastomer based Ambulatory Active Compression Device

    … actuator is charged thus improving system lifetime and power efficiency. Analytical models characterizing the operation of the belt mechanisms are formulated and validated experimentally with less than 7% error. Both static and dynamic testing is conducted in order to characterize the …

    waterloo Repository record for Design, Fabrication, and Testing of a Dielectric Elastomer based Ambulatory Active Compression Device (opens in a new tab)

  18. Creep, Fatigue and Creep-Fatigue Interactions in Modified 9% Cr - 1% Mo (P91) Steels

    … with increasing strain ranges and increasing hold times at 625°C. Metallographic assessment of the tested specimens shows that the damage mode in both pure fatigue and 600 seconds hold time cyclic tests is predominantly transgranular fatigue with some presence of oxidation spikes. The damage …

    arkansas Repository record for Creep, Fatigue and Creep-Fatigue Interactions in Modified 9% Cr - 1% Mo (P91) Steels (opens in a new tab)

  19. Analysis of Hold Times for Gaseous Fire Suppression Agents in Total Flooding Applications

    … leakage paths inherent in building construction. Hold time refers to the amount of time it takes for the concentration of the agent-air mixture to drop below a specified concentration at a designated height within the protected enclosure. In this study an experimental test enclosure was used to …

    maryland Repository record for Analysis of Hold Times for Gaseous Fire Suppression Agents in Total Flooding Applications (opens in a new tab)

  20. Anizotropinių plonų sluoksnių optinių charakteristikų priklausomybių nuo garinimo parametrų tyrimas "Investigation of the dependences of the optical characteristics of anisotropic thin films on evaporation parameters" /

    … dependency on deposition rate and substrate hold time. During this research refractive indices of silicon dioxide anisotropic thin films were modelled and birefringence dependence on evaporation rate and zigzag column structure segment length was determined. Higher birefringence was found in …

    vilnius Repository record for Anizotropinių plonų sluoksnių optinių charakteristikų priklausomybių nuo garinimo parametrų tyrimas "Investigation of the dependences of the optical characteristics of anisotropic thin films on evaporation parameters" / (opens in a new tab)

Page 1 of 6