Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Hole quality"”.

  1. Improvement of crankshaft oil hole quality through surface integrity studies

    … greater stress on the drilled crankshaft oil hole and increases the probability of fatigue failure. The goal of this research is to gain an improved understanding of the surface integrity of drilled holes, to enable manufacturers to select better machining strategies, and to have greater …

    whiterose Download PDF for Improvement of crankshaft oil hole quality through surface integrity studies (opens in a new tab)

  2. A STUDY ON BURNISHING AND SELF-PILOTING MECHANISM FOR HIGH PRECISION DEEP HOLE DRILLING OF INCONEL 718

    Gundrilling is a high-precision hole making operation used to fabricate oilfield logging tools. However, the high hot hardness and abrasive nature of Inconel 718 alloys used in the manufacturing of logging tools promotes gundrill wear and rapidly deteriorates hole quality. This work details …

    nus Repository record for A STUDY ON BURNISHING AND SELF-PILOTING MECHANISM FOR HIGH PRECISION DEEP HOLE DRILLING OF INCONEL 718 (opens in a new tab) Download file for A STUDY ON BURNISHING AND SELF-PILOTING MECHANISM FOR HIGH PRECISION DEEP HOLE DRILLING OF INCONEL 718 (opens in a new tab)

  3. Microdrilling of Biocompatible Materials

    … allows drilling of 127 micrometers diameter microholes with an aspect ratio of 10:1. The drilling parameters, dominant wear pattern, hole positioning accuracy and effect of AlTiN tool coating are experimentally determined. The experimental data trend agrees with classical Taylor's machining …

    tamu Repository record for Microdrilling of Biocompatible Materials (opens in a new tab)

  4. Machining Fibre Metal Laminates and Al2024-T3 aluminium alloy

    … technologies on cutting forces and a number of hole quality parameters. The generated drilling cutting forces, quality of machined hole and drilling-induced damage and defects when drilling GLARE fibre metal laminates were experimentally studied. Drilling-induced defects and damage investigated …

    whiterose Download PDF for Machining Fibre Metal Laminates and Al2024-T3 aluminium alloy (opens in a new tab)

  5. Simultaneous machining of aerospace structural materials using poly-drills

    … among all the machining processes as millions of holes are required to produce riveted and bolted joints in the assembly operation of the aircraft's structures. The major challenges which arise from the drilling of these alloys are characterized by the low hole quality, which might initiate cracks …

    edithcowan Repository record for Simultaneous machining of aerospace structural materials using poly-drills (opens in a new tab)

  6. Drilling of Glass Filled Resin Bonded Materials

    … takes place at a high rate giving an inferior hole quality and delamination of the sheet at the exit side of the hole and, under certain conditions, at the entry side of the hole also. The object of this project was to investigate the drilling of G.R.P. laminated sheet and to make …

    aston Download PDF for Drilling of Glass Filled Resin Bonded Materials (opens in a new tab)

  7. Prediction of surface roughness and diameter deviation in drilling ti-6al-4v alloy using artificial neural networks and Taguchi's design of experiments

    … operations. Two main attributes of drilled-hole quality are surface roughness and diameter deviation. Major factors that affect the job quality are spindle speed, feed rate and thrust force. This research is focused on the effects of these parameters in drilling Titanium alloy (Ti-6Al-4V) …

    missouri Repository record for Prediction of surface roughness and diameter deviation in drilling ti-6al-4v alloy using artificial neural networks and Taguchi's design of experiments (opens in a new tab)

  8. The influence of tool geometry on the performance of drilling tools

    … the conventional one in the majority of cases. Hole quality, roundness, size and roughness were also considered as a further aspect of drill performance. Improvement in hole quality is shown to arise under certain cutting conditions. Accordingly it might be possible to use a hole which is …

    aston Download PDF for The influence of tool geometry on the performance of drilling tools (opens in a new tab)

  9. A study of the drilling of advanced carbon fibre composites

    … nature of the fibreslimits drill life. The hole quality produced by drillingin terms of fibre pullout and matrix cracking affects thenotch sensitivity of the hole.The present thesis describes an experimental and analyticalstudy of drilling of the carbon fibre composites carriedout with the …

    salford Download PDF for A study of the drilling of advanced carbon fibre composites (opens in a new tab)

  10. Dynamic behavior of drill-shaft-drive assembly subjected to cutting loads

    … industry. In drilling, the parameters such as hole-roundness, location and size, and interior surface finish are important for the proper functioning in the assembly. All of these parameters are related to the orbital motion of the drill during the drilling operation, which mainly arises from …

    concordia Download PDF for Dynamic behavior of drill-shaft-drive assembly subjected to cutting loads (opens in a new tab)

  11. Drilling of carbon fibre reinforced plastic (CFRP) and metal matrix composites (MMC)

    … composites and understand its effects on feature quality and workpiece integrity. Specific objectives of the project relate to establishing preferred / optimum operating parameters (cutting speed, feed rate and drill strategies) and investigating the influence of cutting environment (dry, chilled …

    birmingham Download PDF for Drilling of carbon fibre reinforced plastic (CFRP) and metal matrix composites (MMC) (opens in a new tab)

  12. Drilling of Ti/CFRP/A1 multilayer stack materials

    … joining, hence the requirement for fixation holes. Currently, the individual material sections (titanium, aluminium and CFRP) are machined independently prior to assembly however; there is growing demand within the industry to produce holes through the stack in a single operation. The …

    birmingham Download PDF for Drilling of Ti/CFRP/A1 multilayer stack materials (opens in a new tab)

  13. Microdrilling of Nitinol

    … for its ability to produce accurate, high quality holes in a cost efficient manner when compared to other technologies. This research investigated the minimization of tool wear when drilling with Ø127µm uncoated tungsten carbide tools, as well as with AlTiN/Si3N4 and AlTiN coated tools in …

    tamu Repository record for Microdrilling of Nitinol (opens in a new tab)

  14. Investigation of machining forces during constant velocity drilling in SACE : (spark assisted chemical engraving) technology

    … removal rate, without damaging the drill-hole quality, all of these strategies are investigated for practical applications, out of which gravity feed is found well characterized by now. Investigation and characterization of constant velocity drilling , still remains one of the …

    concordia Download PDF for Investigation of machining forces during constant velocity drilling in SACE : (spark assisted chemical engraving) technology (opens in a new tab)

  15. A Finite Element and Experimental Investigation on the Fatigue of Riveted Lap Joints in Aircraft Applications

    … observe the effects of interference, sealant and hole quality on the residual stress state using Implicit and Explicit solvers. Effects of subsequent load transfer are also analyzed with the developed model. A set of controlled lap joint fatigue experiments for the different conditions provides …

    gatech Repository record for A Finite Element and Experimental Investigation on the Fatigue of Riveted Lap Joints in Aircraft Applications (opens in a new tab)

  16. Characterization of Lubricant Droplets for Internal Minimum Quantity Lubrication

    … Due to high machinability of A380 aluminum, the hole diameter and hole cylindricity were the same when drilling with MQL or flood coolant, excessive amount of MQL lubricant did not improve the hole quality, but without coolant the hole cylindricity doubled. The result of this study will be …

    tamu Repository record for Characterization of Lubricant Droplets for Internal Minimum Quantity Lubrication (opens in a new tab)

  17. HELICAL MILLING: AN ENABLING TECHNOLOGY FOR MACHINING HOLES IN FULLY HARDENED AISI D2 TOOL STEEL

    … of manufacturing flexibility, better product quality, and the prospect of dry machining. This coupled with developments in super hard cutting tool materials and machine tools, and better understanding of hard machining technology translates into significant economical benefits and faster …

    mcmaster Repository record for HELICAL MILLING: AN ENABLING TECHNOLOGY FOR MACHINING HOLES IN FULLY HARDENED AISI D2 TOOL STEEL (opens in a new tab)

  18. Design and analysis of an end-of-arm robotic drilling tool for aerospace manufacturing with active vibration control

    … significantly impacting production efficiency, quality, and safety. This thesis presents the design, prototyping, and analysis of the Advanced Collaborative Multifunctional End-Effector (ACME), a robotic drilling tool specifically developed for aerospace applications. ACME addresses key industry …

    manitoba Repository record for Design and analysis of an end-of-arm robotic drilling tool for aerospace manufacturing with active vibration control (opens in a new tab)

  19. Characterization of drillability of sandwich structure of carbon fiber reinforced epoxy composite over titanium alloy

    … (cutting speed, feed and tool condition) on hole quality, force and torque during drilling of a sheet of IM7/977-3 composite material over 6Al-4V Titanium alloy sheet. The work piece is mounted on a developed fixture on top of a CNC vertical milling machine and a force and torque sensor was …

    missouri Repository record for Characterization of drillability of sandwich structure of carbon fiber reinforced epoxy composite over titanium alloy (opens in a new tab)

Page 1 of 2