Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Hollow Structural Section"”.

  1. Branch Plate-to-circular Hollow Structural Section Connections

    Although branch plate connections with circular hollow section (CHS) members are simple to fabricate and cost-effective, they are generally very flexible under low load application resulting in the limit states design resistance being governed by an imposed deformation limit. Restricting the …

    toronto-retro Repository record for Branch Plate-to-circular Hollow Structural Section Connections (opens in a new tab)

  2. Weld Effective Lengths for Hollow Structural Section Connections

    … the â fit-for-purposeâ design of welds in hollow structural section (HSS) connections using weld effective lengths, and the applicability of the North American directional strength-increase factor for fillet welds to HSS. Weld effective lengths for circular hollow section (CHS) connections …

    toronto-retro Repository record for Weld Effective Lengths for Hollow Structural Section Connections (opens in a new tab)

  3. Mechanical Behaviour of Cold-formed Hollow Structural Section Material

    … dynamic properties of cold-formed Rectangular Hollow Sections (RHS) produced by different manufacturing techniques (direct-forming versus continuous-forming; heat-treated versus non-heat-treated) were studied comparatively for the first time. The aim of this research was to quantify the effects …

    toronto-retro Repository record for Mechanical Behaviour of Cold-formed Hollow Structural Section Material (opens in a new tab)

  4. Stress concentration factors for truss-end hollow structural section connections

    Design of end connections in a welded hollow structural section (HSS) truss has been a practical problem encountered by structural engineers since current design standards do not include definitive recommendations. For fatigue design, formulae in current design guidelines [for calculation of stress …

    uvic Repository record for Stress concentration factors for truss-end hollow structural section connections (opens in a new tab)

  5. Behaviour and design of direct-formed hollow structural section members

    … America, cold-formed square and rectangular hollow sections (collectively referred to as RHS hereinafter) of commonly specified cross-sectional dimensions are produced using either the indirect-forming approach or the direct-forming approach. The indirect-forming approach, as the conventional …

    uvic Repository record for Behaviour and design of direct-formed hollow structural section members (opens in a new tab)

  6. Design of One-Story Hollow Structural Section (HSS) Columns Subjected to Large Seismic Drift

    … the behavior of steel columns that are square hollow structural sections (HSS) is investigated for stability using three design methods: elastic design, plastic hinge design, and pinned base design. First, for elastic design, the compression and flexural strength of the HSS columns are …

    vt Repository record for Design of One-Story Hollow Structural Section (HSS) Columns Subjected to Large Seismic Drift (opens in a new tab)

  7. Seismic resistance of concrete-filled square steel hollow structuralsection beam-columns.

    … and high-strength concrete-filled square steel hollow structural section columns with two ratios of tube wall thickness to tube dimension. An extensive experimental program included testing twenty-four, concrete filled, square steel hollow structural section column specimens under constant axial …

    ottawa-retro Repository record for Seismic resistance of concrete-filled square steel hollow structuralsection beam-columns. (opens in a new tab)

  8. Effects of Galvanizing on Residual Stresses and Stress Concentrations in RHS X- and T-Connections

    … magnitudes and distributions in cold-formed hollow structural section (HSS) members and can affect their behaviours under axial compressive and flexural loads. However, research on the effects of galvanizing on HSS connections is insufficient. Similar to previous research, in this research, a …

    uvic Repository record for Effects of Galvanizing on Residual Stresses and Stress Concentrations in RHS X- and T-Connections (opens in a new tab)

  9. Improving the Behavior of Special Concentrically Brace Frames with Cast Steel Inserts

    … and deformation capacity. A cruciform cross-section has been chosen for the cast component geometry, which is specially detailed to enhance energy dissipation and increase low cycle fatigue life thereby reducing the likelihood of fracture. In this dissertation, capacity design parameters are …

    arizona-thes Repository record for Improving the Behavior of Special Concentrically Brace Frames with Cast Steel Inserts (opens in a new tab)

  10. Deformation Demands and Collapse Performance of Seismically Detailed Concentrically Braced Frames

    … of Steel Construction Seismic Provisions for Structural Steel Buildings. To justify these limits, system-level analysis of SCBFs and OCBFs during high seismic events is needed. This study uses nonlinear response-history analysis to evaluate the deformation demands and collapse performance of …

    marquette Repository record for Deformation Demands and Collapse Performance of Seismically Detailed Concentrically Braced Frames (opens in a new tab)

  11. Inelastic behavior of tube-in-tube (TnT) buckling controlled braced frame

    Traditional hollow structural section (HSS) braces used in steel concentrically braced frames (SCBFs) often exhibit limited ductility and premature buckling under cyclic seismic loading, leading to rapid strength degradation and performance that does not meet modern seismic design expectations. …

    iastate Repository record for Inelastic behavior of tube-in-tube (TnT) buckling controlled braced frame (opens in a new tab)

  12. SIMULATION AND PERFORMANCE OF STEEL SHEET SHEATHED SHEAR WALLS IN CFS-FRAMED BUILDING SYSTEMS

    … wall capacity. Most noticeably, shear walls with hollow structural section end posts present markedly higher shear capacity than those with CFS section chord studs. A phenomenological wall line modeling protocol was proposed. Wall line models are validated against recent dynamic and pseudo-static …

    jhu Repository record for SIMULATION AND PERFORMANCE OF STEEL SHEET SHEATHED SHEAR WALLS IN CFS-FRAMED BUILDING SYSTEMS (opens in a new tab)

  13. Contribution of Slotted Web to the Cyclic Behavior of Bare and Composite Beam-to-HSS Column Connections

    … 3% to 8%, attributable to the loss of web cross-section at the slot and, for the more flexible H/t = 16 columns, to increased out-of-plane deformation of the HSS column flange. The beneficial effects of the web slot were observed for both bare and composite configurations and for HSS column …

    calpoly Repository record for Contribution of Slotted Web to the Cyclic Behavior of Bare and Composite Beam-to-HSS Column Connections (opens in a new tab)

  14. MODELING AND TESTING OF WELDED STRUCTURAL JOINTS MACHINED WITH LASER CUTTING TECHNOLOGY

    … on the performance and failure mechanisms of Hollow Structural Section (HSS) joints manufactured by Laser Cutting Technology (LCT). In mid-high-rise steel structures, Circular or Rectangular Hollow Structural Sections (CHS/RHS) have emerged as recommended structural members. Nonetheless, the …

    trento Repository record for MODELING AND TESTING OF WELDED STRUCTURAL JOINTS MACHINED WITH LASER CUTTING TECHNOLOGY (opens in a new tab) Embargoed

  15. Fracture risk of braces in ductile concentrically braced frames

    … ability of the analytical model to capture the structural member response under earthquake excitations accurately. In concentrically braced frames (CBFs), the hysteretic response of braces dominates the seismic behavior of the structural system. The ability to predict the inelastic brace …

    iastate Repository record for Fracture risk of braces in ductile concentrically braced frames (opens in a new tab)

  16. Seismic performance evaluation of concentrically braced and fiction damped braced frames through full-scale testing

    … Full-scale tests conducted on the CBF using hollow steel structural sections for the cross-bracing show that the bracing may develop twice the energy dissipation ability predicted by computer analysis. This appears to be due to the coplanar interaction of the braces. Significant additional …

    ubc Repository record for Seismic performance evaluation of concentrically braced and fiction damped braced frames through full-scale testing (opens in a new tab) Download PDF for Seismic performance evaluation of concentrically braced and fiction damped braced frames through full-scale testing (opens in a new tab)

  17. WEAK AXIS BENDING RESPONSE OF POLYGONAL HOLLOW STEEL SECTIONS

    This thesis consists of two sections: the first section evaluates the structural behaviour of hollow structural sections (HSS) including polygonal hollow sections (PHS) and rectangular hollow sections (RHS) under weak-axis four-point loading, and the second section focuses on the complementary …

    queens Repository record for WEAK AXIS BENDING RESPONSE OF POLYGONAL HOLLOW STEEL SECTIONS (opens in a new tab)

  18. Design of direct- and indirect-formed rectangular hollow section beam-columns

    Hollow structural sections (HSS) are tubular steel profiles commonly produced by cold-forming for various engineering applications. Square and rectangular hollow sections—referred to as SHS and RHS, and collectively termed RHS hereinafter—are extensively used as structural members, including …

    uvic Repository record for Design of direct- and indirect-formed rectangular hollow section beam-columns (opens in a new tab)