Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 73 for “"Horizontal force"”.

  1. Understanding and Optimising Vertical and Horizontal Force Production for Performance in Team Sport Athletes

    … have been predominantly used in power profiling. Horizontal jumps have greater similarity with many functional movements but have received limited attention from researchers. Similarly, limited research exists concerning methods of improving acute and chronic jump performance in the horizontal …

    auckland-tech Repository record for Understanding and Optimising Vertical and Horizontal Force Production for Performance in Team Sport Athletes (opens in a new tab)

  2. Using Kinetics to Determine Slip Probability in a Movement Associated with a High Risk of Slip Occurrence

    … may be possible to evaluate only one component, horizontal force, of the current friction calculation. The purpose of this dissertation was to determine if horizontal force generation would serve as a more accurate predictor of slip probability for movements associated with a high-risk of …

    calgary Repository record for Using Kinetics to Determine Slip Probability in a Movement Associated with a High Risk of Slip Occurrence (opens in a new tab)

  3. Study of Timber-frame Building Seismic behaviour by Means of numerical modelling and Full-scale shake table testing

    … behaviour of a timber-frame wall subjected to a horizontal force is presented, suggesting some analytical expression to correlate the mechanical behaviour of the entire wall to the mechanical properties of connection devices (i.e. fasteners, angle brackets and hold-down). Particular attention was …

    trento Repository record for Study of Timber-frame Building Seismic behaviour by Means of numerical modelling and Full-scale shake table testing (opens in a new tab)

  4. The effect of complex training on horizontal power production in rugby union players : a thesis presented in partial fulfilment of the requirements for the degree of Master of Science at Massey University

    … was to examine the effect of complex training on horizontal power production in rugby players. 9 participants completed two four week phases of training (complex and standard) in a randomized order. Participant performance in 5RM squat, horizontal force and horizontal power was tested prior to and …

    massey Repository record for The effect of complex training on horizontal power production in rugby union players : a thesis presented in partial fulfilment of the requirements for the degree of Master of Science at Massey University (opens in a new tab)

  5. Nano-mechanics of a micro cantilever beam excited by interactive atomic forces

    … a microcantilever tip, commonly used in atomic force microscopes. This was done by examining the horizontal force component of the forces between one atom on the tip of a microcantilever and a single row of atoms lying within an adjacent surface. This model does not include an energy dissipation …

    ut-knoxville Repository record for Nano-mechanics of a micro cantilever beam excited by interactive atomic forces (opens in a new tab)

  6. Effects of Tapering on Power-Force-Velocity Profiling and Performance in Elite Rugby League

    … changes and the effects of tapering on power-force-velocity profiling and jump performance in professional rugby league players. Our findings showed that backs are faster over 10 m (Effect Size=1.26) and 40 m (ES=1.61) than forwards. Furthermore, backs produce greater relative horizontal force …

    auckland-tech Repository record for Effects of Tapering on Power-Force-Velocity Profiling and Performance in Elite Rugby League (opens in a new tab)

  7. Lateral collapse potential of wood pallets

    … model was developed to predict the maximum horizontal force a pallet can sustain. A simple equilibrium of forces approach including joint rigidity was used. A lateral load test machine was built which induces and measures the amount of horizontal force required to collapse a pallet. After …

    vt Repository record for Lateral collapse potential of wood pallets (opens in a new tab)

  8. Comparison of direct-s modes produced by different source types

    … expended to create surface sources that apply horizontally directed impulses to the earth (horizontal vibrators and horizontal impacts). In my project, radial shear (SR) and transverse shear (ST) waves generated by different types of sources and recorded by multicomponent receivers in a VSP …

    texas Repository record for Comparison of direct-s modes produced by different source types (opens in a new tab)

  9. Ciklinės apkrovos poveikio dviračio rėmo ir šakės sąrankai tyrimas /

    … of frame and fork assembly fatigue test by horizontal force. During the test the frame and fork assembly is deformed by cyclic loading. It causes the strains in elements assembly which are varying in time. Used testing machine with pneumatic muscles actuator allows to carry out test with …

    vilnius Repository record for Ciklinės apkrovos poveikio dviračio rėmo ir šakės sąrankai tyrimas / (opens in a new tab)

  10. Risk factors, assessments and prevention of muscle strain injuries

    … during athletic movements (i.e. ground reaction forces or mechanical stiffness) are thought to increase the risk of injury and compromise performance. The first two chapters of this PhD reviewed the literature on the topics of mechanical stiffness, and the effects of eccentric exercise on optimum …

    edithcowan Repository record for Risk factors, assessments and prevention of muscle strain injuries (opens in a new tab)

  11. <i>Fixture Design for Load Measurement in Friction Stir Welding</i>

    In the Friction Stir Welding Process a vertical force is required for plunging the pin or probe of the tool into the workpiece specimen material, and maintaining contact between the shoulder and the substrate. In addition to the vertical force, Friction Stir Welding Process also involves a …

    odu Repository record for <i>Fixture Design for Load Measurement in Friction Stir Welding</i> (opens in a new tab)

  12. The Mechanics of Regaining Balance in Pirouettes

    … above the supporting foot (SF), which requires a horizontal force on the body from the floor; (2) Hop the SF to a position vertically under the CM, which compromises the aesthetic of the movement; or (3) slide the SF under the CM, which moves the area of support and produces a horizontal force to …

    bryn-mawr Repository record for The Mechanics of Regaining Balance in Pirouettes (opens in a new tab)

  13. Μελέτη της σχέσης δύναμης, ταχύτητας, ισχύος και ανάλυση κινηματικών δρομικών χαρακτηριστικών σε αθλητές υψηλού αγωνιστικού επιπέδου

    … neuromuscular system to produce maximum level of force and power is essential parameter on athletic performance. The force, velocity and power producing capacities of leg muscles could be well described using the linear force-velocity (F-v) and the parabolic power–velocity (P-v) relationships. …

    greece Repository record for Μελέτη της σχέσης δύναμης, ταχύτητας, ισχύος και ανάλυση κινηματικών δρομικών χαρακτηριστικών σε αθλητές υψηλού αγωνιστικού επιπέδου (opens in a new tab)

  14. CENTRIFUGE MODEL STUDY ON SPUDCAN-FOOTPRINT REMEDIATION TECHNIQUES

    … ON FOOTPRINT AVOIDANCE BY STUDYING THE INDUCED HORIZONTAL FORCE AND BENDING MOMENT ON THE SPUDCAN AT VARIOUS POSITIONS AWAY FROM THE FOOTPRINT. HOWEVER, AVOIDANCE AS SPECIFIED BY INDUSTRY GUIDELINE SNAME (2008) IS OFTEN UNATTAINABLE IN PRACTICE DUE TO GEOMETRY CONSTRAINTS IN POSITIONING THE …

    nus Repository record for CENTRIFUGE MODEL STUDY ON SPUDCAN-FOOTPRINT REMEDIATION TECHNIQUES (opens in a new tab) Download file for CENTRIFUGE MODEL STUDY ON SPUDCAN-FOOTPRINT REMEDIATION TECHNIQUES (opens in a new tab)

  15. Modeling of Lamb waves and application to crack identification

    … between modeling the sinusoidal application of horizontal force (or displacement) as input and modeling the piezoelectric response of an actuator subjected to sinusoidal voltage input was performed. Secondly, the effects of a crack (disbond) between a piezoelectric wafer and the structure were …

    nps Repository record for Modeling of Lamb waves and application to crack identification (opens in a new tab)

  16. Effect of an Open Water Body on Tsunami Inundation and Forces Exerted on a Structure

    … of the canal, and a loadcell was used to record horizontal force time histories during bore impact. The canal geometry was systematically varied to evaluate its influence on bore transformation and structural loading. The experimental results indicate that the presence of a water-filled canal …

    ottawa-retro Repository record for Effect of an Open Water Body on Tsunami Inundation and Forces Exerted on a Structure (opens in a new tab)

  17. Natural and induced anistropy in rocks under plastic conditions

    … used to qualitatively investigate the deviation forces encountered when drilling through an anisotropic medium. The preliminary investigation of anisotropic rocks lead to the study of an elastic - linear hardening limestone, Cordova Cream Limestone, also known as Austin Chalk. A yield condition …

    rice Repository record for Natural and induced anistropy in rocks under plastic conditions (opens in a new tab)

  18. Human-induced lateral excitation of public assembly structures

    … guidelines focus on human-induced vertical forces and assume linear structural behaviour, however, the most widely publicized problems have involved horizontal vibrations and many real-life structures are characterized by nonlinear behaviour. Following a brief investigation of vibration …

    oxford Repository record for Human-induced lateral excitation of public assembly structures (opens in a new tab)

  19. Simulation of soil-to-front-end loader bucket interaction using Discrete Element Method (DEM)

    … with the bucket moving at 62.5 mm/s forward horizontal speed during the initial penetration to the DEM soil pile, turning with an estimated curved trajectory during the soil filling phase. Three DEM predicted bucket performance parameters, soil horizontal reaction force (bucket horizontal …

    iastate Repository record for Simulation of soil-to-front-end loader bucket interaction using Discrete Element Method (DEM) (opens in a new tab)

  20. Application of a numerical-based soil reaction curve method for design of laterally loaded monopiles

    … and moment along the pile shaft, along with a horizontal force and moment at the pile base. Two design methods, incorporating these soil reaction curves, the rule-based method and the numerical-based method, have been proposed. The PISA project demonstrated that the two methods provided better …

    oxford Repository record for Application of a numerical-based soil reaction curve method for design of laterally loaded monopiles (opens in a new tab)

Page 1 of 4