Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 47 for “"Hot Carrier Injection"”.
-
COMPARISON OF EFFECTS OF PROCESS TECHNOLOGY-DERIVED INPUT PARAMETERS OF DIE-LEVEL FAILURE MODELS
… circuits, time-dependent dielectric breakdown, hot carrier injection, andelectromigration are primary die-level wear-out failure mechanisms. Failure models for these mechanisms can be used to assess and compare the parts based on their ability to withstand these failure mechanisms. The failure …
-
Detection of fraudulently recycled integrated circuits
… by exploiting persistent changes caused by hot carrier injection (HCI); 2) generates a DC signal measurable by common low-cost test equipment; and 3) reuses an existing I/O interface, including existing pins; while 4) requiring a very small footprint. Combining this sensor with a random …
-
Characterization of hot carrier reliability in deep submicronmeter MOSFETs
… characteristics, gate oxide breakdown and hot carrier reliability of deep submicrometer n-MOSFET is studied in detail. The reliability of 0.18 um n-MOSFETs stressed under hot carrier injection and enhanced by substrate bias, is studied. The manipulation of high-energy tail electrons (HETEs) …
-
RELIABILITY CHARACTERIZATION AND MODELING FOR HIGH VOLTAGE LDMOS DEVICES
… of logic low voltage (LV) MOSFET transistors are hot carrier injection (HCI), bias temperature instability (BTI) and time dependent dielectric breakdown (TDDB). However, due to structural and functional difference, there are more degradation mechanisms introduced in HV MOSFET. The drift region …
-
System-level modeling and reliability analysis of microprocessor systems
… positive bias temperature instability (PBTI), hot carrier injection (HCI), gate-oxide breakdown (GOBD), backend time-dependent dielectric breakdown (BTDDB), electromigration (EM), and stress-induced voiding (SIV) is proposed to analyze the impact of each wearout mechanism on state-of-art …
-
Characterization of Aging Effects in 22 nm Fully Depleted Silicon-On-Insulator Technology With Ring Oscillators
… such as Bias Temperature Instability (BTI) and Hot Carrier Injection (HCI). The 22nm Fully Depleted Silicon On Insulator (FDSOI) technology offers high energy efficiency for digital and mixed signal circuits, making it particularly suitable for long term, low power applications. In this study, …
-
A STUDY OF SERIES RESISTANCE AND EFFECTIVE CHANNEL MOBILITY IN LDD NMOSFET
… resistance and effective channel mobility under hot-carrier injection was also studied in detail. Models relating their degradation behaviour to stress conditions were established and a new hot-carrier lifetime model was formulated. This linear drain current drift model can account for the …
-
Experimental Analysis on Aging of Integrated Circuits
… as negative bias temperature instability (NBTI), hot carrier injection (HCI), time dependent dielectric breakdown (TDDB), and electromigration (EM) are coming up as potential threats to superior performance in the field. All these reliability issues cause intermittent failures and finally cause …
-
Hot Carrier Effect On Ldmos Transistors
… problems encountered when scaling down is the hot carrier induced degradation of MOSFETs. This problem has been studied intensively during the past decade, under both static and dynamic stress conditions. In this period it has evolved from a more or less academic research topic to one of the …
-
Physical and Electrical Properties of Hot -Carrier Degradation of Silicon *Mos Transistors Processed in Deuterium and Hydrogen
… annealing of MOS transistors to achieve hot-carrier lifetime improvement. Deuterium processing as a function of the process parameters such as temperature, time, and pressure for MOS transistors with one level and multilevels of metalization has been studied. Lifetime improvements of …
-
12nm Finfet aging characterization through wear-out sensor design
… effects of bias temperature instability (BTI), hot-carrier injection (HCI), electromigration (EM), and time dependent dielectric breakdown (TDDB). Then, a survey on state-of-the-art wear-out mitigation techniques reveals that developing aging mechanisms sensors aids academia and industry alike …
-
On the feasibility of using current-based monitors to detect ageing in CMOS Circuits
… are Bias-Temperature-Instability (BTI), Hot Carrier Injection (HCI) and Time-Dependent Dielectric Breakdown (TDDB). And between these ageing effects, BTI is the most prominent ageing effect than others. These effects have been reported to compromise CMOS technology in sub-100nm region …
-
inSense: A Variation and Fault Tolerant Architecture for Nanoscale Devices
… negative-bias temperature instability (NBTI) and hot-carrier injection (HCI), and increased sensitivity to single event upsets (SEUs). Consequently, future devices may exhibit reduced performance, diminished lifetimes, and poor reliability. This research proposes a variation and fault tolerant …
-
PART SELECTION AND MANAGEMENT BASED ON RELIABILITY ASSESSMENT FOR DIE-LEVEL FAILURE MECHANISMS
… Time-Dependent Dielectric Breakdown, Hot Carrier Injection, and Negative Bias Temperature Instability) as demonstration cases. It investigates the extent to which industry-published documents can be used to obtain the data necessary to simulate these mechanisms. It will report on …
-
Use It or Lose It: Proactive, Deterministic Longevity in Future Chip Multiprocessors
… systems to mitigate the wearout of transistors. Hot Carrier Injection (HCI) and Negative Bias Temperature Instability (NBTI) are two prominent usage based transistor degradation mechanisms in the deep sub-micron process technologies. This wearout of transistors can lead to timing violations along …
-
Circuit-Based Reliability Characterization Methods in Advanced CMOS Technologies
… such as Bias Temperature Instability (BTI), Hot Carrier Injection (HCI), and Electromigration (EM) have become more prevalent as electrical fields and current density continue to increase in scaled devices. In addition, the rapid introduction of process improvements, such as high-k/metal gate …
-
Reliability Characterization of Mixed-Signal Circuits: Integrated Voltage Regulators and Computing-in-Memory Systems
… such as Bias Temperature Instability (BTI) and Hot Carrier Injection (HCI). These aging effects degrade MOSFET characteristics over time, potentially leading to reduced efficiency, accuracy, and functional correctness. This research investigates the impact of aging on mixed-signal circuits, …
-
DEEP SUBMICRON CMOS VLSI CIRCUIT RELIABILITY MODELING, SIMULATION AND DESIGN
… MOSFET intrinsic wearout mechanisms, including Hot Carrier Injection (HCI), Time Dependent Dielectric Breakdown (TDDB), and Negative Bias Temperature Instability (NBTI). The accelerated lifetime models help to identify the most degraded transistors in a circuit in terms of the device's terminal …
-
On-Chip circuits for characterizing transistor aging mechanisms in advanced CMOS technologies.
… parametric shifts or circuit failures caused by Hot Carrier Injection (HCI), Bias Temperature Instability (BTI), and Time Dependent Dielectric Breakdown (TDDB) in CMOS transistors have become more severe with shrinking device sizes and voltage margins. These mechanisms must be studied in order to …
-
Transient Investigations of High-Field Conduction in Low-Dimensional Materials
… very effective tool for studying the dynamics of carriers in semiconductors. Because of the capability to precisely control the generation of Joule heat in a semiconductor device, the transient pulsing technique has also been successfully applied to reveal the inherent electrical characteristics …
Page 1 of 3