Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Hot Tearing"”.
-
Strain evolution during hot tearing in aluminium alloys
Hot tearing refers to cracks that frequently occur within the mushy zone during cooling from the liquid to solid state during shape and ingot casting. Both ferrous and non-ferrous alloys may be affected, and there is some evidence to suggest those with long freezing ranges are more susceptible. Due …
-
Hot tearing predictions in direct chill cast aluminum AA5182 ingots
Hot tearing is a major industrial problem because it affects both the quality and productivity of the casting process. These defects form in the last stage of the solidification sequence, in a region where the grains are surrounded by a continuous film of liquid and so they cannot sustain tensile …
-
Hot tearing and constitutive behaviour of semi-solid aluminum alloys
The occurrence of hot tearing during solidification is one of the major factors influencing both the quality and productivity of aluminum castings. In order to reduce the formation of hot tears, quantitative information regarding both hot tearing formation and semi-solid deformation is essential. …
-
Weldability of aluminum-lithium alloys: an investigation of hot tearing mechanisms
Includes bibliographical references (pages 213-232).
-
Development of novel grain refiners for AZ91D magnesium alloys and their effect on hot tearing
… refinement on common casting defects, such as hot tearing, in Mg alloys remains unclear. In this work, several novel grain refiners were produced via the powder metallurgical process known as spark plasma sintering (SPS). The novel grain refiners were used to treat AZ91D Mg alloy and a grain …
-
A STUDY ON HOT TEARING IN DIRECT CHILL CASTING OF ALUMINUM ALLOYS USING A MULTI-SCALE APPROACH
Hot tearing is one of the most severe defects encountered in direct chill (DC) casting of aluminum alloys and is intimately linked with the constitutive behavior of the alloy in the semi-solid region. The experimental studies in this field are limited due to the high temperature at which hot tears …
-
The effects of microstructural features and process parameters on the hottearing in direct chill cast aluminum alloys
Hot tearing is an irreversible failure that occurs above the the solidus temperature of an alloy during casting, in the presence of a liquid phase. These cracks possess serious quality implications in industrial direct chill (DC) casting process. During solidification, thermal stresses are induced …
-
Experimental and numerical analysis of semi-solid constitutive behaviour of B206 and A356 foundry alloys
… for a wide range of industrial applications. Hot tearing is often a challenging casting defect in aluminum alloys, occurring in the semi-solid state, which has a substantial impact on the quality of casting products. The constitutive response of the semi-solid material to deformation is …
-
Hot Tearing Susceptibility of Single-Phase Al-3.8 wt%Zn-1 wt%Mg Alloy Using the Constrained Rod Solidification Experiment: Influence of 1.2 wt%Fe Addition and Grain Refinement
… this adaptation is the high susceptibility to hot tearing during the solidification of these alloys. A new structural Al alloy for high pressure die casting application was developed from the single-phase Al-Zn-Mg family; a high strength and ductile alloy that could be adapted to manufacturing …
-
Selective laser melting of metals using elemental mixtures
… and density primarily due to the presence of hot tearing throughout the microstructure. The limited materials space greatly inhibits the further penetration of AM processes into industry as the materials are both unfamiliar to designers and are performance limited. In the present study, a …
-
Effect of processing techniques on the secondary intermetallic phases and thermomechanical behaviour of 6xxx series aluminium
… phases α-AlFeSi and β-AlFeSi on the hot tearing properties of a 6xxx series aluminium alloy. The approach was to isolate ‘phase identity’ and consequently phase morphology as the variables between two alloys that were being tested. This was achieved by processing a base 6063 alloy, …
-
Thermal Analysis and Microstructure Investigation of Eutectic (Al-Si) and Dilute Eutectic (Al-Fe) Casting Aluminum Alloys
… the grain growth restriction factor (Qtrue) and hot tearing sensitivity index (HTS) were evaluated for each solidification condition, accompanied by corresponding microstructure analyses. Although DECA castings exhibits a more desirable equiaxed rosette morphology of the primary Al phase in the …
-
Castable Aluminum Alloys containing Nickel and Iron with High Electrical and Thermal Conductivity
… multicomponent alloys demonstrated comparable hot tearing susceptibility and fluidity to Al A380, an Al-Si cast Al alloy. Additionally, the multicomponent alloying system could produce cast parts with half the microhardness and double the electrical conductivity of Al A380. Artificially aging …
-
Controlled Diffusion Solidification: Process Mechanism and Parameter Study
… casting routes due to the main disadvantage of hot tearing or hot cracking during solidification, which renders the cast component ineffective. To overcome the disadvantages of thixoforming and rheocasting processes, Controlled diffusion solidification (CDS) process was innovated to enable …
-
Grain refinement in laser powder bed fusion of in-situ metal matrix composite 6061 aluminum alloys
… range, leading to columnar growth and hot tearing during solidification. The addition of inoculants to currently unprintable Al alloys presents a method to refine grains and mitigate issues such as hot tearing, as well as reduce anisotropy in parts, by eliminating columnar grains. An …
-
PHD THESIS: CONTROLLED DIFFUSION SOLIDIFICATION PROCESS (CDS) OF AL-7XXX WROUGHT ALLOYS: HEAT TREATMENT,MICROSTRUCTURE, AND MECHANICAL PROPERTIES
… foundry industry due to the main disadvantage of hot tearing or hot cracking during solidification process. This can render the cast component ineffective. To overcome the disadvantages of thixoforming and rheocasting processes, Controlled Diffusion Solidification (CDS) process was innovated …
-
Quantitative Metallography, Optimization of HVHPC Process and Modelling Solute Homogenization During Solutionizing of Al-4Zn-1Mg-1.2Fe-0.1Ti Alloy
… phases to show their mitigating effects on hot tearing. A detailed analysis of the casting quality was carried out, including detailed microstructural analyses of defects and defect-free castings, correlating process parameters, shot profiles, uniaxial tensile properties, and fractography. …
-
Mechanisms of Hot-Cracking During Electron Beam Powder Bed Fusion of Co-29Cr-10Ni-7W Alloy
… Co-29Cr-10Ni-7W alloy result in extensive hot cracking along the columnar grains boundaries. Current literature is not clear as to whether solidification or liquation cracking is the initiation mechanism and how these two contribute to crack growth during EB-PBF of difficulty-to-weld …
-
3D Meso-Scale Modelling of Solidification: Application to Advanced High Strength Steels
… AHSSs are due the solidification defects, i.e. hot tearing and segregation. In this thesis, a 3D mesoscale and multi-physics model is developed and validated to directly investigate solidification defects for semi-solid steel with dendritic morphology associated with the peritectic …
Page 1 of 2