Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Hot Work"”.
-
Toughness measurement of hot work die steel
In this present work attempts are made to relate microstructure and fracture toughness (KICSB and COD) for Electem, Thermodie, Hydie and Somdie hot work die steels. Structural features studied were the fracture surfaces and general microstructures, using a scanning electron microscope and optical …
-
The Toughness of a Hot Work Die Steel
… steel products, with particular reference to hot work die steels, has been reviewed. The effect of forging reduction and heat treatment on the fracture toughness of B.S.S. 224 No. 5. nickel-chromium—molybdenum hot work die steel has been determined in the ambient to 500°C. temperature range. …
-
A physico-chemical study of hot work tool steels
Thesis ()--Michigan State College of Agriculture and Applied Science, 1934
-
Synchrotron micro-diffraction analysis of high performance hot work tool steel H13
… been clear. Consequently a low carbon chromium hot work tool steel, AISI H13, which is designed to withstand the temperature, pressure, abrasion, and thermal cycling associated with various hot working operations, was chosen for this investigation. Synchrotron micro-diffraction, characterised by …
-
An Experimental Investigation of Ignition Propensity of Hot Work Processes in the Nuclear Industry
… Canada (NFCC) is one model code which regulates hot work in Canada. The code specifies that hot work processes need only create heat to be considered hot work processes, and requires that precautions taken adhere to those in Canadian Standards Association (CSA) W117.2, which is intended for …
-
Transformation of Surface Oxides during Vacuum Heat Treatment of a Powder Metallurgical Hot Work Tool Steel
… of surface oxide in case of gas atomized Hot Work Tool Steel powder X40CrMoV5-1 in asatomized condition and after heat treatment at different temperatures in vacuum conditions are discussed. Reduction of surface oxides on steel powder prior to consolidation is mandatory to achieve strong …
-
The Effect of Cobalt on the Structure and Properties of a Ni-MO Hot Work Die Steel
… improving a commercial ah nickel 3% molybdenum hot work die steel by progressive additions of up to 10% cobalt has been explored. Several of the major property requirements for hot work steels have been studied and the effect of cobalt determined. Further development of the steel has been based …
-
Effects of hot work reduction ratios on torsional fatigue properties of a strand-cast medium-carbon microalloyed steel, The
Includes bibliographical references.
-
Ignition potential of transient sparks produced by abrasive waterjet cutting in explosive environments
… many mining, mineral processing, and industrial workplaces. These workplaces often require hot work for maintenance, repairs, or production activities. If the workpiece cannot be removed from the potential explosive atmosphere, the hazard must be mitigated through engineering and administrative …
-
The Effect of Forging Reduction on the Properties of a Die Steel
… performance, with particular reference to hot work steels, has been reviewed. The effect of forging reduction on mechanical properties and the service performance of BSS.224 No. 5. nickel-chromium-molybdenum hot work die steel has been studied by processing a 34=ton electrically melted …
-
Wear resistance of surface treated metal-working tools
Tools in metal-working applications experience considerable amounts of wear that lead to degradation of tool performance, reduction in production and limitation of tool life. By using surface treated tools to combat wear, improvement in production quality, increase in production and reduction in …
-
Thermomechanical study of H13 tool steel
H13 is a hot work tool steel used as extrusion and forging dies in metal forming industries. It is characterized by its high thermal stability and wear resistance. For large size tools, H13 alloy bars are generally produced by hot open-die forging of cast ingots. However, the selection of the hot …
-
Fire Risk and its Management in Cruise Vessel Construction Projects
… derived that four out of five fires were due to hot work, and that most of the fires were extinguished by personnel on-board with portable extinguishers. It was estimated that large fires of over one million euros in damages occur every 100 – 200 fire incidents. The thesis provides new …
-
Estudio de corte transversal en minería subterránea. Asociación entre los riesgos identificados por los trabajadores y los establecidos por las empresas. Boyacá - Colombia 2014.
… areas with great job opportunities for the workers' capital. However in the sector has been increasing accidents problem tends to increase with the development projected for 2019 in the number of workers and the arrival of new technologies. Objective. To determine the association between the …
-
The identification and modelling of the dominant failure mode in hot forging tooling
… and modelling of the dominant failure mode in hot forging tooling, used in the production of nickel based superalloy compressor blades. A preliminary study identified the most frequently occurring part defects that cause tool failure. The forming process was characterised, relevant tooling …
-
Failure mechanisms in surface treated tool steels
… associated with cyclic and static stressing of hot work tool steels has been undertaken. The materials used were BH13 and Ni-Cr-Mo (No.5) die steels, both were evaluated in the hardened and tempered conditions and after the application of various surface treatments. Five test procedures were …
-
Production of steel matrix composites by mechanical milling and spark plasma sintering
Hot work tool steels (HWTSs) are ferrous alloys for tooling application, particularly developed to meet high toughness and good hot hardness. Increasing hardness generally leads to a decrease in toughness, therefore metal matrix composite (MMC) coatings and functionally graded materials have been …
-
Investigation of various optimization processes for aluminum extrusion production through mechanical assessment procedures
… of the extrudates. In this context, the present work systematically explores potential methodologies, including the application of Finite Element Analysis (FEA) tools and the use of liquid nitrogen as a die cooling agent. These approaches aim to produce extrudates with superior mechanical …
-
Influence of micro and mesostructure on the fracture properties of additive manufactured steels
… on the three different kinds of AM steels: a hot work tool steel (HWTS), stainless steel 304L (SS304L), and 22Cr-6Ni duplex stainless steel (DSS). These materials are used across aerospace, automotive, nuclear, marine, and biomedical industries, as well as for applications such as tools and …
-
The Effect of Heat Treatment Atmosphere on Hardening of Surface Region of H13 Tool Steel
… is significant to steel hardness property. H13 hot work tool steel, a well known material used as a die material for its superior mechanical and hardening properties, was used for the analysis of carbon diffusion during austenization. Samples made of H13 steel were subjected to four different …
Page 1 of 2