Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 51 for “"Hot cracking"”.

  1. Investigation of hot cracking in additive manufactured nickel-base superalloys

    … Ni-base superalloys, are susceptible to cracking during both AM processing and subsequent densification and/or heat treatment. Therefore, to fully utilize the potential that AM offers, it is crucial to optimize the manufacturing process in order to minimize the amount of defects in the …

    chalmers Repository record for Investigation of hot cracking in additive manufactured nickel-base superalloys (opens in a new tab)

  2. A Comprehensive Hot Cracking Model Development Coupling Calphad with Machine Learning

    Hot cracking is one of the most consequential defects limiting alloy processability in laser powder bed fusion (LPBF) additive manufacturing, yet no exiting model predicts cracking susceptibility reliably across compositionally diverse alloy systems. This thesis pursues two sequential objectives: a …

    alabama Repository record for A Comprehensive Hot Cracking Model Development Coupling Calphad with Machine Learning (opens in a new tab)

  3. Benchmarking hot cracking behavior during localised melting using a new standard test methodolgy and thermodynamic predictors

    Hot cracking is a widespread and severe defect during local melting, and it is undoubtedly an important issue defining the alloy’s castability and weldability. This can be witnessed in the area of additive manufacturing and welding technology where in-build cracking is one of the key issues being …

    iastate Repository record for Benchmarking hot cracking behavior during localised melting using a new standard test methodolgy and thermodynamic predictors (opens in a new tab)

  4. Mechanisms of Hot-Cracking During Electron Beam Powder Bed Fusion of Co-29Cr-10Ni-7W Alloy

    … Co-29Cr-10Ni-7W alloy result in extensive hot cracking along the columnar grains boundaries. Current literature is not clear as to whether solidification or liquation cracking is the initiation mechanism and how these two contribute to crack growth during EB-PBF of difficulty-to-weld …

    auckland-tech Repository record for Mechanisms of Hot-Cracking During Electron Beam Powder Bed Fusion of Co-29Cr-10Ni-7W Alloy (opens in a new tab)

  5. The effects of alloying elements and thermal history of microstructure and hot cracking resistance of austenitic stainless steel weld metals

    … elements and multiple thermal cycling on the hot cracking resistance of austenitic stainless steel weld metals. In addition, the effect of composition and multiple thermal cycling on the hot ductility was also determined and correlated with the hot cracking tendency. To more clearly define the …

    utk-theses Repository record for The effects of alloying elements and thermal history of microstructure and hot cracking resistance of austenitic stainless steel weld metals (opens in a new tab)

  6. Evaluation of the hot cracking sensitivity of 316 NG, 347 and 304 stainless steels using the hot ductility test and the modified subscale varestraint test

    … was to investigate the susceptibility to hot cracking of 316 NG, modified 347 and 304 NG stainless steels which have been approved by the Nuclear Regulatory Commission for BWR use. In addition, the hot ductility of these steels was also determined and correlated with the base metal HAZ hot …

    ut-knoxville Repository record for Evaluation of the hot cracking sensitivity of 316 NG, 347 and 304 stainless steels using the hot ductility test and the modified subscale varestraint test (opens in a new tab)

  7. Weldability of nuclear grade austenitic stainless steels

    … discussed in four parts. 1) Statistical test for hot ductility testing evaluation. 2) Statistical evaluation of the proposed subscale Varestraint test method. 3) Evaluation of nuclear grade austenitic stainless steels by the Gleeble hot ductility and Varestraint hot cracking methods. 4) The …

    ut-knoxville Repository record for Weldability of nuclear grade austenitic stainless steels (opens in a new tab)

  8. Influence of microstructure on susceptibility to weld defects in two high strength low alloy steels

    Hot cracking root causes in two HSLA welded steels were investigated and remedies were proposed to avoid hot cracking at centerline of the weld. The specimens were welded in Tjoint configuration keeping the constant welding parameters for both investigated alloys: Gr.50 (with lower content of …

    ets-quebec Download PDF for Influence of microstructure on susceptibility to weld defects in two high strength low alloy steels (opens in a new tab)

  9. Printability and Phase Transformation of Selected Alloys Additively Manufactured By Laser Powder Bed Fusion

    … of selected alloys and understand the cracking mechanism through the application of the solidification cracking criterion. An in-house laboratory-scale gas atomizer was employed to produce gas-atomized powders of carbon-bearing steels and eutectic multi-principal element alloys …

    ucf Repository record for Printability and Phase Transformation of Selected Alloys Additively Manufactured By Laser Powder Bed Fusion (opens in a new tab)

  10. Optimisation des paramètres du procédé de thixoforgeage des alliages d'aluminium 7075 à haute fraction solide

    … introduces defects in the wrought alloy such as hot cracking, porosity, shrinkage porosity, large shrinkage, macrosegregation solid-liquid. These defects can be reduced by limiting the liquid fraction to 0.1 and thus using thixoforging process. 7075 alloy is particularly sensitive to hot …

    liege Repository record for Optimisation des paramètres du procédé de thixoforgeage des alliages d'aluminium 7075 à haute fraction solide (opens in a new tab) Restricted access

  11. Weldability of Modified 800H alloys

    … in this dissertation in terms of HAZ liquation cracking and HAZ softening tendency. Fundamental studies of the mechanisms of HAZ liquation cracking and HAZ softening behavior in Modified 800H alloy are addressed. This research is part of a DOE project entitled "Investigation of Welding and …

    utk-theses Repository record for Weldability of Modified 800H alloys (opens in a new tab)

  12. High Temperature Cracking in the Weld Heat Affected Zone of High Strength Ferritic Steels

    … of steel composition and welding parameters on hot cracking in the heat affected zone of high strength ferritic steels. In addition, the hot ductility test has been studied to determine whether it is capable of distinguishing unambiguously between crack sensitive and crack resistant steels. This …

    aston Download PDF for High Temperature Cracking in the Weld Heat Affected Zone of High Strength Ferritic Steels (opens in a new tab)

  13. A Correlation of Microstructure With Hot-Ductility in the Heat-Affected Zone of Inconel 718.

    … can be varied to minimize such stresses, cracking may occur in the fusion zone or in the weld heat-affected zone (HAZ). The objective of this study was to obtain a better understanding of hot cracking in the weld HAZ by making a correlation between the HAZ microstructure and the HAZ …

    uab Repository record for A Correlation of Microstructure With Hot-Ductility in the Heat-Affected Zone of Inconel 718. (opens in a new tab)

  14. Weldability and microstructural analysis of nuclear grade austenitic stainless steels

    <p>This study evaluated the hot ductility response, and hot cracking susceptibility (fusion zone solidification cracking and HAZ liquation cracking) of modified nuclear grade and standard austenitic stainless steels. Extensive microstructural characterization using state-of-the art analytical …

    utk-theses Repository record for Weldability and microstructural analysis of nuclear grade austenitic stainless steels (opens in a new tab)

  15. Process Development for Aluminum 6061 RAM2 for Wire Arc Additive Manufacturing

    … and corrosion resistance. It is prone to hot cracking, however, when deposited through a WAAM process. Fortius Metals developed a 6061 reactive additive manufacturing (RAM) 2 wire that provides an inoculant-based solution to mitigate hot cracking and material deposition. Work will be …

    ut-knoxville Repository record for Process Development for Aluminum 6061 RAM2 for Wire Arc Additive Manufacturing (opens in a new tab)

  16. MICROSTRUCTURE TAILORING IN ALUMINUM ALLOYS THROUGH SUPPORT STRUCTURES AND IN-SITU ALLOYING APPROACHES IN LASER POWDER BED FUSION

    … powder bed fusion (LPBF), is limited by severe hot cracking. Inoculation treatment has emerged as an effective strategy to overcome this challenge by refining the coarse columnar grains typically formed during LPBF solidification. Despite recent progress in the development of inoculated LPBF Al …

    nus Repository record for MICROSTRUCTURE TAILORING IN ALUMINUM ALLOYS THROUGH SUPPORT STRUCTURES AND IN-SITU ALLOYING APPROACHES IN LASER POWDER BED FUSION (opens in a new tab) Download file for MICROSTRUCTURE TAILORING IN ALUMINUM ALLOYS THROUGH SUPPORT STRUCTURES AND IN-SITU ALLOYING APPROACHES IN LASER POWDER BED FUSION (opens in a new tab)

  17. Caracterização microestrutural de ligas eutéticas de alumínio no estado bruto de fusão e tratadas termicamente por homogeneização

    … low tendency to the formation of porosity and hot cracking. The Al-Cu (binary), Al-Cu-Si and Al-Cu-Mg (ternary) and Al- Cu-Si-Mg (quaternary) systems were produced by sand casting. The alloys were analyzed microstructurally in the as-cast condition and after homogenizing heat treatment at 495 ° …

    brazil-ufrn Repository record for Caracterização microestrutural de ligas eutéticas de alumínio no estado bruto de fusão e tratadas termicamente por homogeneização (opens in a new tab)

Page 1 of 3