Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 37 for “"Hot extrusion"”.

  1. Hot Extrusion of Alpha Phase Uranium-Zirconium Alloys for TRU Burning Fast Reactors

    … during the casting process. A low temperature hot extrusion process was explored as a potential method to fabricate uranium-zirconium fuel alloys containing the TRU isotopes. The advantage of extrusion is that metal powders may be mixed and enclosed in process canisters to produce the desired …

    tamu Repository record for Hot Extrusion of Alpha Phase Uranium-Zirconium Alloys for TRU Burning Fast Reactors (opens in a new tab)

  2. Solid State hot extrusion of chip-based aluminum alloy AA6060: the role of process parameters and heat treatments on fatigue and corrosion fatigue

    … and milling, cleaning them, and subsequently hot-extruding them at temperatures below the melting point, thereby offering substantial energy savings. The ultimate goal is to provide valuable insights into optimizing production parameters and heat treatments so that the produced secondary …

    greece Repository record for Solid State hot extrusion of chip-based aluminum alloy AA6060: the role of process parameters and heat treatments on fatigue and corrosion fatigue (opens in a new tab)

  3. MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF Zn-Ti ALLOYS FOR BIODEGRADABLE STENT APPLICATIONS

    … as-cast candidates were processed through hot extrusion. This phase study was focused on the structure-property relationships before and after hot extrusion. The as-extruded Zn-0.01 wt% Ti had the highest average ultimate tensile strength and yield strength of 269 and 177 MPa, respectively. …

    mtu Repository record for MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF Zn-Ti ALLOYS FOR BIODEGRADABLE STENT APPLICATIONS (opens in a new tab)

  4. Thermomechanically processed magnesium-silver alloys as antibacterial and biodegradable implant materials

    … The processing includes casting, homogenization, hot extrusion, equal channel angular pressing (ECAP), friction stir processing (FSP) and rolling with subsequent annealing. The influence of microstructure on tensile properties and degradation behavior was revealed. The cytocompatibility, …

    cau-kiel Repository record for Thermomechanically processed magnesium-silver alloys as antibacterial and biodegradable implant materials (opens in a new tab)

  5. Angle of extrude die design and extrude die radius as related to the extrusion load and die life of 23-8N steel

    … many processes to shape or form materials. Extrusion is one such process. This study focused on extrusion process variables of die angle, die radius, press load, and die life. Possible relationships among these four variables were explored. The data gathered in this study expanded the …

    iastate Repository record for Angle of extrude die design and extrude die radius as related to the extrusion load and die life of 23-8N steel (opens in a new tab)

  6. Development of futuristic magnesium based composites

    … assisted rapid sintering technique followed by hot extrusion. It was, remarkably, revealed that ball milling might be a suitable route to prepare composite nano-particles which subsequently could be embedded within the Mg matrix. It was, likewise, witnessed that Mg composites reinforced with …

    nus Repository record for Development of futuristic magnesium based composites (opens in a new tab) Download file for Development of futuristic magnesium based composites (opens in a new tab)

  7. The effect of thermomechanical processing on the tensile properties and microstructure of a 6061 Al-Al_x001B_b2_x001B_s0_x001B_b3_x001B_s metal matrix composite

    … when compared to samples which were processed by hot extrusion only. Microstructural analysis provided clear evidence of the absence of damage to reinforcing particles during TMP and of load transfer to these particles during subsequent straining. Failure during tension testing resulted from the …

    nps Repository record for The effect of thermomechanical processing on the tensile properties and microstructure of a 6061 Al-Al_x001B_b2_x001B_s0_x001B_b3_x001B_s metal matrix composite (opens in a new tab)

  8. Structure and Properties of Twin Boundaries in Ni-Mn-Ga Alloys

    … solidification and plastic deformation by hot rolling and hot extrusion as well as high pressure torsion (HPT). To examine the texture of coarse-grained Ni-Mn-Ga alloys (due to a solidification process or dynamic recrystallization), diffraction of synchrotron radiation and neutrons was …

    qucosa-diss

  9. DEVELOPMENT OF BIORESORBABLE MAGNESIUM ALLOPLASTIC BONE SUBSTITUTES FOR MANDIBULAR RECONSTRUCTION

    … Melt Deposition (DMD) assisted with hot extrusion techniques and tested for cytocompatibility in 2D and 3D cultures. In vitro cytotoxicity and osteogenic potential of the synthesised alloys were tested using MC3T3-E1 pre osteoblast cells. Corrosion rate and pH were analysed using HBSS …

    nus Repository record for DEVELOPMENT OF BIORESORBABLE MAGNESIUM ALLOPLASTIC BONE SUBSTITUTES FOR MANDIBULAR RECONSTRUCTION (opens in a new tab) Download file for DEVELOPMENT OF BIORESORBABLE MAGNESIUM ALLOPLASTIC BONE SUBSTITUTES FOR MANDIBULAR RECONSTRUCTION (opens in a new tab)

  10. Processing and Characterization of Light Metal Matrix Composites (LMMCS)

    … reinforcement was fabricated via casting and hot-extrusion. This macro-composite was characterized in detail and conceptually developed through 3 stages. Initially, the Al volume fraction was not uniform in the macro-composite. In the first stage consequently (Concept 1, Chapters 4-6), …

    nus Repository record for Processing and Characterization of Light Metal Matrix Composites (LMMCS) (opens in a new tab) Download file for Processing and Characterization of Light Metal Matrix Composites (LMMCS) (opens in a new tab)

  11. Exploration of a new manufacturing process for improving mechanical properties in a hot extruded Al-Mg-Si alloy

    … beams are typically manufactured by rolling or extrusion of billets, followed by artificial aging for strengthening. In conventional processing routes, billets are produced by casting prior to subsequent deformation. However, the cooling rates during casting and homogenization treatment …

    vt Repository record for Exploration of a new manufacturing process for improving mechanical properties in a hot extruded Al-Mg-Si alloy (opens in a new tab)

  12. Synthesis, mechanical and tribological characteristics of Mg/SiC metal-matrix composites

    … melt deposition technique (DMD) followed by hot extrusion. Varying amounts of sub-micron SiC particulates (average size of 0.6I?m) were incorporated as reinforcement in magnesium matrix and the composites were subjected to recrystallization heat treatment. Finally, hybrid magnesium composites …

    nus Repository record for Synthesis, mechanical and tribological characteristics of Mg/SiC metal-matrix composites (opens in a new tab) Download file for Synthesis, mechanical and tribological characteristics of Mg/SiC metal-matrix composites (opens in a new tab)

  13. Mathematical Modelling of the Material Flow and Microstructural Evolution During the Extrusion of AA3003 Aluminum Alloy

    A comprehensive mathematical model of the hot extrusion process for aluminum alloys has been developed and validated. The model is capable of predicting the material flow behaviour and microstructure evolution that occurs in aluminum alloy AA3003 during extrusion. The plasticity module was …

    waterloo Repository record for Mathematical Modelling of the Material Flow and Microstructural Evolution During the Extrusion of AA3003 Aluminum Alloy (opens in a new tab)

  14. How to formulate for structure and texture via 3D-Printing – design and characterisation of edible biopolymer gels to act as release vehicles

    … the gaps in the literature present surrounding hot-extrusion 3D printing. Hydrocolloid gels that gel rapidly, with a high gel strength and recovery that allows it to maintain its shape after printing are ideal for this method. This work examined agar and kappa-carrageenan (кC) as candidate …

    birmingham Download PDF for How to formulate for structure and texture via 3D-Printing – design and characterisation of edible biopolymer gels to act as release vehicles (opens in a new tab)

  15. Feature based costing of extruded parts

    … the manufacturing cost of parts made by the extrusion process. Feature Based Costing (FBC) techniques have been used to develop the cost model, which is intended to be used early in the design phase of a part, when the geometry and the material are being defined in a Computer Aided Design …

    uiuc Repository record for Feature based costing of extruded parts (opens in a new tab)

  16. THE EFFECT OF MICROSTRUCTURE AND TEXTURE ON HIGH CYCLE FATIGUE PROPERTIES OF AL ALLOYS

    … of the deformation texture developed during the hot extrusion provided significant orientation strengthening in the high strength Al alloys.Fatigue cracks tended to initiate at coarse second phase particles on sample surfaces and the crack population varied markedly with the applied stresses in …

    uky-thes Repository record for THE EFFECT OF MICROSTRUCTURE AND TEXTURE ON HIGH CYCLE FATIGUE PROPERTIES OF AL ALLOYS (opens in a new tab)

  17. An investigation of alloying effects in aluminum dispersion strengthened with A1

    … into rods then included ball-milling, vacuum hot pressing, vacuum heat treating, and hot extrusion.</p><p>The magnesium additions improved strengths up to 200&deg;C with little effect above that temperature. Room-temperature tensile strengths up to 77,O00 psi were obtained which are comparable …

    utk-theses Repository record for An investigation of alloying effects in aluminum dispersion strengthened with A1 (opens in a new tab)

Page 1 of 2