Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 222 for “"Hot pressing"”.
-
Deformation theory of hot-pressing
… approximately perpendicular to the direction of pressing were about 2.2 times larger than those parallel to the direction of pressing. This observation has been subsequently used to modify the theoretical models. The particle rearrangement and plastic flow have been found to be the predominant …
-
Reactive hot pressing of boehmite
… conditions, with special emphasis devoted to hot pressing in the temperature range 300 to 600°C. The present work indicates that it is possible to produce a hard dense compact under certain conditions. However, the behaviour of the material during reactive hot pressing appears to be more …
-
Theories of hot-pressing : plastic flow contribution
… overall densification of a powder compact during hot-pressing has been analysed. The basis of this analysis is the incorporation of hot-working characteristics of materials at elevated temperatures into an equation applicable to hot-pressing conditions. The empirical equation relating steady state …
-
Changes in Oriented Strandboard Permeability During Hot-Pressing
Convective heat transfer during hot pressing in wood-based composite panel manufacturing is widely accepted as the most important means of heat transport for resin curing. The rate of convective heat transfer to the panel core is controlled by its permeability. Permeability in the plane of the …
-
Experimentation and modeling of hot pressing behaviour of veneer-based composites
To understand the unique hot pressing behaviour of veneer-based composites, the key objectives of this research were to: (1) characterize air permeabilities of veneers and gluelines; (2) examine fundamentals of veneer contacts for bonding; (3) explore mechanics of veneer compression; and (4) …
-
Alumina - silicon carbide composites from kaolinite-carbon precursors by hot-pressing
… periods, both under sintering as well as hot-pressing conditions. It was established that the reduction of mullite and silica starts around 1450° C, where the rate of reaction is very slow. Until about 1800° C during the reduction of mullite, SiO₂ gets preferentially reduced, thus forming …
-
Modeling mat consolidation of strand-based wood composites during hot pressing
… a means of describing of the effect of pressing variables on the development of the VDP is needed. This study examined the role of environmental factors, i.e., temperature and moisture content (MC), on the compression and viscoelastic behavior of wood strands. The strand stress-strain …
-
Three-dimensional heat and mass transfer during oriented strandboard hot-pressing
… and mass transfer during oriented strandboard hot-pressing. The empirical experimentation programme examined the effects of different flake-alignments on lateral and transverse heat and gas flow through the mat. It involved measuring internal mat temperatures and gas pressures in robot formed, …
-
Relating pressure response profile during hot pressing to property development in flakeboard
… pressure response profile of a flakeboard during hot pressing was exclusively studied using variables of flake species (aspen and lodgepole pine), flake types (small-size flakes and large-size flakes), resin contents (0 and 8 percent), moisture contents (2 and 6 percent), and press closing times …
-
Modeling the Transient Effects during the Hot-Pressing of Wood-Based Composites
… The number of interacting variables during the hot-compression process is prohibitively large to assess a wide variety of data by experimental means. Therefore, the main advantage of the model based approach that the effect of the hot-compression parameters on the final properties of wood-based …
-
The effect of hot-pressing parameters on resin penetration and flakeboard layer properties
… to determine how they were influenced by various pressing parameters. The evenness of penetration was found to be a function of the natural variability of the wood and was not influenced by the pressing parameters of temperature, moisture content, pressure, or time. These four parameters were …
-
Development of a vacuum hot pressing apparatus for production of metal matrix composites
Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics, and Materials Science, 1985
-
Effect of Hot Pressing on Utilization of Catalyst in PEMFC Electrodes Fabricated via Electrospray
… were prepared by varying the MEA fabrication hot-pressing parameters of pressure, temperature, and time. The evaluated performance of MEA's were varied primarily due to differences in hot pressing condition of MEA fabrication, and due to cell operating conditions. At 80°C and 100% relative …
-
Powder metallurgical titanium alloys (TiNi and Ti-6Al-4V): injection moulding, press-and-sinter, and hot pressing
… and most common powder metallurgical route; and hot pressing is a fast process in which elevated temperature and compressive stress are simultaneously applied to the powders, leading to the fully dense resultant product. Nevertheless, the titanium and its alloys MIM (Ti-MIM) technology has not …
-
Effect of hot pressing temperature on the electrochemical stability of Li2S-P2S5 (75 -- 25 % mole) as a solid electrolyte
… mole) processing conditions, most specifically hot pressing, and their effect on Li stability. It was found that improvements on electrochemical performance can be attained by promoting particle chemistry during hot pressing.
Page 1 of 12