Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 58 for “"Hot-deformation"”.

  1. Hot deformation and damage of Free Cutting Steel

    Hot rolling as a manufacturing process of Free Cutting Steel (FCS) can produce products with enhanced properties through controlled thermo-mechanical processing. However, like any other manufacturing process, imperfections at various scales can appear during hot rolling therefore affecting product …

    whiterose Download file for Hot deformation and damage of Free Cutting Steel (opens in a new tab)

  2. Stress Relaxation of AA 5182 During Hot Deformation

    … of AA 5182 during the industrial process of hot tandem rolling. The rolling operations typically take place at temperatures between 300°C and 500°C and strain rates on the order of 10 s-1 to 100 s-1. While the material is in transit between rolling operations, interstand tension continues the …

    uiuc Repository record for Stress Relaxation of AA 5182 During Hot Deformation (opens in a new tab)

  3. Analysis of the steady state hot deformation of aluminum

    It has been suggested by others that hot working is an extension of high temperature creep because of the similar observed dependencies of stress, strain rate, temperature and the similar activation energies of the two types of deformation. This suggestion has been evaluated for commercial purity …

    ubc Repository record for Analysis of the steady state hot deformation of aluminum (opens in a new tab) Download PDF for Analysis of the steady state hot deformation of aluminum (opens in a new tab)

  4. Hot deformation processing and microstructural evolution of alloy 617

    Includes bibliographical references (pages 130-133).

    colo-mines Repository record for Hot deformation processing and microstructural evolution of alloy 617 (opens in a new tab)

  5. Hot deformation behavior of as-cast alloy 718, The

    Includes bibliographical references.

    colo-mines Repository record for Hot deformation behavior of as-cast alloy 718, The (opens in a new tab)

  6. Hot deformation behavior of a high nitrogen austentic stainless steel

    Includes bibliographical references.

    colo-mines Repository record for Hot deformation behavior of a high nitrogen austentic stainless steel (opens in a new tab)

  7. MODELING THE MICROSTRUCTURE EVOLUTION DURING HOT DEFORMATION OF MICROALLOYED STEELS

    … grain coarsening of recrystallized grains during hot rolling of Nb microalloyed austenite. Key feature of recrystallization model is detailed description of the nucleation process; the model predicts recrystallization incubation time as well as time evolution of recrystallization nucleation rate …

    mcmaster Repository record for MODELING THE MICROSTRUCTURE EVOLUTION DURING HOT DEFORMATION OF MICROALLOYED STEELS (opens in a new tab)

  8. Exploration of In-Situ Hot Deformation in Wire-Arc Additive Manufacturing

    … condition as defects are common. In-situ hot deformation for WAAM provides a process pathway to improve the material properties of welded AM parts through hot working. Stronger, more consistent WAAM depositions produced with in-situ processing pose a high value to the manufacturing …

    ut-knoxville Repository record for Exploration of In-Situ Hot Deformation in Wire-Arc Additive Manufacturing (opens in a new tab)

  9. Microstructure and texture evolution during hot deformation of AZ80 magnesium alloy

    The research investigates the hot deformation behaviour of the AZ80 alloy, with special emphasis on obtaining the flow stress data for a variety of deformation conditions (in range of 300 – 450 °C, and 0.001/s to 1/s) based on uniaxial compression tests, and studying how the microstructure and …

    waterloo Repository record for Microstructure and texture evolution during hot deformation of AZ80 magnesium alloy (opens in a new tab)

  10. Hot Deformation Characteristics of Oxide/Sulphide Inclusions in Low Carbon Steels

    … distribution and Microscan V for composition. Hot rolling of the suction cast bars was achieved on a 2 high-rolling mill. Samples were taken at 50%, 70% and 90% total reductions in thickness and temperature of rolling was between 800 and 1300°C. Deformation of the inclusions was measured by …

    aston Download PDF for Hot Deformation Characteristics of Oxide/Sulphide Inclusions in Low Carbon Steels (opens in a new tab)

  11. Dynamic normal grain growth in BCC interstitial-free steel during hot deformation

    Concurrent plastic deformation at elevated temperature can produce dynamic normal grain growth (DNGG). DNGG significantly impacts microstructure by accelerating grain growth and/or evolving texture. Both of these were observed in an interstitial-free steel deformed in uniaxial tension at 850°C at a …

    texas Repository record for Dynamic normal grain growth in BCC interstitial-free steel during hot deformation (opens in a new tab)

  12. The Effect of Hot Deformation on the Strength of Precipitation Hardened Steels

    … the subject of this thesis. The effect of warm deformation on plain carbon, vanadium and niobium steels was studied, using rolling and torsion as the mode of deformation. The microstructure was observed using the Scanning Electron Microscope in the Back Scattered Electron Mode. This relatively …

    aston Repository record for The Effect of Hot Deformation on the Strength of Precipitation Hardened Steels (opens in a new tab) Download PDF for The Effect of Hot Deformation on the Strength of Precipitation Hardened Steels (opens in a new tab)

  13. Hot Deformation of IN718 with Various Initial Microstrucures- Experiments and State-variable Modelling

    … the effect of δ precipitate morphology on the hot deformation behaviour of IN718 a series of hot isothermal axi-symmetric compression 'upset' tests have been carried out at fixed nominal strain rates and temperatures relevant to industrial hydraulic press-forging (0.001-0.3/s and 990-1040°C). …

    the-open-u Download PDF for Hot Deformation of IN718 with Various Initial Microstrucures- Experiments and State-variable Modelling (opens in a new tab)

  14. Hot Deformation Behavior of an Fe-Al Alloy Steel in Two Phase Region

    … The elimination of slab reheating and roughing deformation, however, leave fewer opportunities for grain refinement and some large grains persist in the microstructure. To solve this problem, a new chemistry which leads to a two-phase mixture of ferrite and austenite over a wide temperature …

    mcmaster Repository record for Hot Deformation Behavior of an Fe-Al Alloy Steel in Two Phase Region (opens in a new tab)

  15. Hot deformation behaviour of Al₂O₃/7075 Al composites and their matrix alloy

    Aims to determine the hot working behavior of two alumina particle reinforced aluminum-matrix composites and their matrix alloy under continuous deformation conditions at typical hot working temperatures and strain rates.

    concordia Download PDF for Hot deformation behaviour of Al₂O₃/7075 Al composites and their matrix alloy (opens in a new tab)

  16. Effect of Manganese (Mn) Content and Homogenization Treatment on Hot Deformation of AA3xxx Aluminum Alloys

    … content and homogenization heat treatment on the hot deformation behavior of AA3XXX aluminum alloy was investigated. Three Mn contents of 0.05, 0.29 and 1.04 wt.% were considered. These alloys were subjected to a single-step heat treatment (H1), two two-steps heat treatments (H2 and H3) cycles. …

    waterloo Repository record for Effect of Manganese (Mn) Content and Homogenization Treatment on Hot Deformation of AA3xxx Aluminum Alloys (opens in a new tab)

  17. Study of the Microstructural Refinement of a High Niobium Microalloyed Steel Under Controlled Hot Deformation

    … content (~0.1 wt%) which allows for controlled hot rolling due to its ability to retard the recrystallisation of the deformed austenite. The HTP steel alloy enable the possibility to achieve highly refined microstructures with superior strength and toughness over conventional steels. Grain …

    whiterose Download PDF for Study of the Microstructural Refinement of a High Niobium Microalloyed Steel Under Controlled Hot Deformation (opens in a new tab)

  18. Microstructural evolution during hot deformation of the 6061 aluminium alloy based Al₂O₃ metal matrix composites

    … the microstructural changes associated with hot axisymmetric testing of a 6061 aluminium alloy reinforced with 10, 15 and 20% alumina particulate. Cylindrical specimens 10 mm diameter x 15 mm height were compressed in the temperature range of 573-823 K (300-550 °C), at a strain rate of …

    ubc Repository record for Microstructural evolution during hot deformation of the 6061 aluminium alloy based Al₂O₃ metal matrix composites (opens in a new tab) Download PDF for Microstructural evolution during hot deformation of the 6061 aluminium alloy based Al₂O₃ metal matrix composites (opens in a new tab)

Page 1 of 3