Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 39 for “"Hot-dip galvanizing"”.
-
Quality controlled hot dip galvanizing and phosphate etching
Thesis (M.E.)--Michigan State College of Agriculture and Applied Science, 1953
-
Experimental Investigation of Air-Knife Geometry in Continuous Hot-Dip Galvanizing
… of galvanized steel strip in a continuous hot-dip galvanizing line. In this process, an impinging jet is used to remove the excess zinc alloy from the steel strip and control the final coating weight by applying wall pressure and shear stress on the moving substrate emerging from the bath …
-
A model of stabilizer roll bearing for a continuous hot-dip galvanizing line
… the cause for the unscheduled shutdown of a galvanizing line. The lifetime of the hardware used in these lines is not only a function of materials used but also on factors such as line speed, sheet tension, bearing contact pressure, bearing alignment, zinc pot temperature, corrosion as a …
-
Selective Oxidation and Reactive Wetting of 2Mn-Si Steels During Continuous Hot-Dip Galvanizing
… advanced high strength steels during continuous galvanizing was investigated. The effect of the addition of 0.05 wt.% Sn on the selective oxidation and reactive wetting of the Fe-0.1C-2Mn-1.7Si (wt.%) steel was also determined. The experimental steels were annealed at intercritical annealing …
-
Developing the design of road going welded structures with special considerations for hot-dip galvanizing
… Administration. The area of highest interest is hot-dip galvanizing. The influence of temperature on steel has long been studied and several sources have found, or otherwise mathematical expressions were derived which describe the relationships between mechanical properties and temperature. …
-
Steel Pickling for Hot-Dip Galvanizing: Effects of Zinc and Iron on Pickling Rates for Hydrochloric and Sulfuric Acids
Hot-dip galvanizing (HDG) is an industrial process that provides corrosion resistance to steel members by dipping and coating them in liquid zinc. In the preparation of the steel members for HDG, diluted strong acids are used to remove surface level imperfections to ensure the zinc coating adheres …
-
SELECTIVE OXIDATION AND REACTIVE WETTING OF FE-0.1C-6MN-2SI-xSN ADVANCED HIGH STRENGTH STEELS DURING CONTINUOUS HOT-DIP GALVANIZING
… strength and ductility. However, the continuous hot-dip galvanizing of these steels is challenging due to selective oxidation of the main alloying elements such as Mn, Si, Al and Cr at the steel surface during the annealing step prior to immersion in the galvanizing Zn(Al, Fe) bath, as extensive …
-
Selective oxidation and reactive wetting of an Fe-0.15C-5.5Mn-1.17Si-1Al advanced high strength steel (AHSS) during hot-dip galvanizing
… the annealing stage prior to immersion in the galvanizing Zn(Al, Fe) bath, the process of continuous hot-dip galvanizing of these steel is challenging. This thesis determined the influence of annealing process parameters such as oxygen partial pressure and annealing time, on the selective …
-
Cracking and Distortion of Welded Steel Structures Arising from the Galvanizing Process
Hot-dip galvanizing is the process of submerging steel elements into molten zinc to form a metallurgically-bonded zinc coating that serves as corrosion protection for the steel substrate. Used with great success on an industrial scale for many decades, hot-dip galvanizing is a ubiquitous process. …
-
ΕΠΙΔΡΑΣΗ ΤΟΥ ΠΑΧΟΥΣ ΚΑΙ ΤΗΣ ΔΟΜΗΣ ΣΤΗΝ ΜΗΧΑΝΙΚΗ ΣΥΜΠΕΡΙΦΟΡΑ ΕΠΙΚΑΛΥΨΕΩΝ ΓΑΛΒΑΝΙΣΜΟΥ
HOT-DIP GALVANIZING IS THE MOST COMMON WIDELY USED METHOD FOR THE CATHODIC PROTECTION OF STEEL. ALTHOUGH THIS METHOD HAS BEEN SYSTEMATICALLY STUDIED FOR MANY DECADES, MANY QUESTIONS ABOUT THE SOLUBILITY OF ELEMENTS IN THE INTERMETALLIC LAYERS AND THE MECHANICAL BEHAVIOUR BOTH OF THE COATING AND THE …
-
Mechanical properties of heat-treated and hot-dip galvanized rectangular hollow section material
Hot-dip galvanizing is widely used for corrosion protection of steel structures. However, there has been a plethora of recent reports on premature cracking in galvanized steel structures, which have resulted in some early decommissions or even hazardous collapses. This research focuses on …
-
Effects of Galvanizing on Residual Stresses and Stress Concentrations in RHS X- and T-Connections
Complementary studies showed that post-production hot-dip galvanizing changes residual stress magnitudes and distributions in cold-formed hollow structural section (HSS) members and can affect their behaviours under axial compressive and flexural loads. However, research on the effects of …
-
Numerical Investigation of Multiple-Impinging Slot Jets in the Gas-Jet Wiping of Liquid Zinc Coatings
… of electronic devices and in the continuous hot-dip galvanizing line, which is the focus of this study. An impinging slot jet is used to control the zinc film thickness on the sheet substrate to reach uniform product coating thickness by applying a pressure gradient and shear stress …
-
Microstructure evolution during intercritical annealing of a Mn-Cr dual-phase steel
… of dual-phase steels (DP600 grade) on a hot-dip galvanizing line. The microstructure evolution model consists of individual submodels for recrystallization, austenite formation in a fully recrystallized material and austenite decomposition after partial austenization. These submodels were …
-
Solidification of Hot-Dip Galvanized Coatings
<p>Continuous hot-dip galvanizing is a common industrial process in which a steel sheet is immersed in a molten zinc alloy bath. After solidification, a thin zinc-rich layer is formed on the steel surface which protects the substrate in corrosive environments. Small amounts of antimony are …
-
Influence of processing and composition on the strength and torsional ductility of high strength steel wire
… intermediate lead patenting, and post-drawing hot-dip galvanizing. Aging heat treatments and tensile prestrains were applied to as-received wires to investigate the effects of thermal and mechanical processing on torsional ductility. The lead patenting process resulted in a wire with greater …
-
Effect of cast iron surface treatment on interfacial adhesion of Al/Fe compound cast structure
… condition, cleaning, etching, sandblasting, hot-dip galvanizing, acidic zinc plating, hot-dip aluminizing, and thermal spraying samples were pre-heated, followed by gravity casting in a pre-heated mold. The Al/Fe interface was studied by optical and scanning electron microscope (SEM) with a …
-
SHORT-TERM FORMATION KINETICS OF THE CONTINUOUS GALVANIZING INTERFACIAL LAYER ON MN-CONTAINING STEELS
Aluminium is usually added to the continuous hot-dip galvanizing bath to improve coating ductility and adhesion through the rapid formation of a thin Fe-Al intermetallic layer at the substrate-liquid interface, thereby inhibiting the formation of brittle Fe-Zn intermetallic compounds. On the other …
-
Galvanization of Al-Si Trip-Assisted Steels
… However, to be used in automotive exposed parts galvanizing is essential to provide corrosion protection. Galvanizing of TRIP steels poses two major challenges: i) the heat treatment used to obtain the TRIP steel microstructure and mechanical properties is not necessarily compatible with the …
-
Characterization of galvanized/galvannealed sheet steel defects towards enabling defect free zinc coatings
… To protect these steels against corrosion, a hot-dip galvanizing process is used. An additional annealing step may follow to produce galvannealed (GA) steels. The present thesis characterized microstructure and chemistry of defects in four industrially produced steels, 3 GA steels and one …
Page 1 of 2