Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 168 for “"Hot-rolled"”.

  1. Hot Rolled Wire Descaling

    In the process of making welding wire an important step is to descale an oxide layer from the surface of the wire. If the oxide layer is not entirely removed it will affect the quality of the finished product. A common way of descaling is to use acids which is not quite environmental friendly. It …

    chalmers Repository record for Hot Rolled Wire Descaling (opens in a new tab)

  2. Nanoscale precipitation in hot rolled sheet steel

    Some newer hot rolled high strength low alloy (HSLA) steels with a single phase ferrite matrix have obtained substantial strengthening from nanoscale precipitation. These HSLA are reported to have a good combination of strength, ductility and hole-expansion ability. In the current work, Gleeble® …

    colo-mines Repository record for Nanoscale precipitation in hot rolled sheet steel (opens in a new tab)

  3. Physical metallurgy of ferritic hot-rolled low carbon steels

    Includes bibliographical references (pages 219-229).

    colo-mines Repository record for Physical metallurgy of ferritic hot-rolled low carbon steels (opens in a new tab)

  4. Web crippling of hot-rolled beams at stiffened-seat connections

    … applies specifically to end web crippling of hot-rolled sections. In addition, three full-scale tests were conducted on steel-concrete composite beams to verify the accuracy of the proposed equation. Finally, the current web crippling equations and the proposed equation are compared for all …

    vt Repository record for Web crippling of hot-rolled beams at stiffened-seat connections (opens in a new tab)

  5. Some aspects of the mechanical testing of hot rolled asphalt surfacings.

    Hot Rolled Asphalt Wearing course mixtures, containing up to 55% by mass of coarse aggregate, were tested over a range of binder contents using the following test methods: Marshall Test Indirect-Tensile Test Wheel-Tracking Test. The results obtained were used to assess the ability of each of these …

    sheffield-hallam Download PDF for Some aspects of the mechanical testing of hot rolled asphalt surfacings. (opens in a new tab)

  6. Behavior of Hot Rolled Asymmetric Steel I-Beams: Concept to Construction

    … more competitive in residential floor systems, a hot-roll asymmetric steel I-beam (termed A-shape) was devised. The overarching goal of this research was to create new knowledge toward the behavior of A-shapes throughout their life, which includes manufacturing, construction, and operation. The …

    tamu Repository record for Behavior of Hot Rolled Asymmetric Steel I-Beams: Concept to Construction (opens in a new tab)

  7. Design of lattice towers from hot-rolled equal leg steel angles

    … first step, existing European specifications on hot-rolled equal angle sections were critically reviewed and then, in a second step, extensive experimental, analytical and numerical studies have been conducted to propose a complete and duly validated set of design rules covering all aspects of …

    greece Repository record for Design of lattice towers from hot-rolled equal leg steel angles (opens in a new tab)

  8. The Development of High Strength Hot Rolled Steel for Automotive Applications

    The development of high strength hot rolled steels is an important area for improving vehicle fuel efficiency. In collaboration with ArcelorMittal, this project focussed on developing a hot rolled steel with 980 MPa ultimate tensile strength, 800 MPa yield strength and 50% hole expansion ratio. To …

    mcmaster Repository record for The Development of High Strength Hot Rolled Steel for Automotive Applications (opens in a new tab)

  9. Design of lattice towers from hot-rolled equal leg steel angles

    … first step, existing European specifications on hot-rolled equal angle sections were critically reviewed and then, in a second step, extensive experimental, analytical and numerical studies have been conducted to propose a complete and duly validated set of design rules covering all aspects of …

    liege Repository record for Design of lattice towers from hot-rolled equal leg steel angles (opens in a new tab) Download PDF for Design of lattice towers from hot-rolled equal leg steel angles (opens in a new tab)

  10. Development of high strength hot rolled strip steel products with bainitic microstructures

    High strength, low alloy, hot rolled strip steels with yield stresses in the range 700 to 1300MPa are required for the Lifting and Excavating product sector. Improved combination of strength and toughness in these high strength steels is desired, requiring a detailed understanding of the …

    birmingham Download PDF for Development of high strength hot rolled strip steel products with bainitic microstructures (opens in a new tab)

  11. Effects of microalloying on hot-rolled and cold-rolled Q&P steels

    … to understand the potential roles of Nb and V in hot-rolled and cold-rolled Q&P steel. For that, a common Q&P steel composition was selected as a Base alloy with 0.2C-1.5Si-2.0Mn (wt. %). Two alloys with an addition of Nb (0.02 and 0.04 wt. %) and one with an addition of V (0.06 wt. %) to the Base …

    colo-mines Repository record for Effects of microalloying on hot-rolled and cold-rolled Q&P steels (opens in a new tab)

  12. A computational study of the behaviour of hot-rolled portal frames in fire

    Practicing engineers can confidently design hot-rolled steel portal frame structure if it is kept at ambient temperature. However, as they are not aware of the potential collapse behaviour of such frames in fire, they tend to use heavy foundations with expensive fire protection materials applied to …

    strathclyde Repository record for A computational study of the behaviour of hot-rolled portal frames in fire (opens in a new tab)

  13. Full-Scale Floor System Testing for Future Hot-Rolled Asymmetric Steel I-Beams

    … more floors in multi-story buildings. However, hot-rolled asymmetric I-beams, or A-shapes, are a path forward to enable structural steel into the residential market. The wider bottom flange allows for their use in shallow-depth steel-concrete composite floor systems since the bottom flange can …

    tamu Repository record for Full-Scale Floor System Testing for Future Hot-Rolled Asymmetric Steel I-Beams (opens in a new tab)

  14. The Deformation Characteristics of Deoxidation Products in Hot Rolled Steel. Available in 2 volumes.

    The deoxidation of: steel at 1600°C. was achieved by the use of Mn-Si-Al alloys. Steels containing silicate inclusions of various compositions were deformed by rolling, and the deformation of these inclusions was studied with reference to various parameters. Electron-probe micro analysis revealed …

    aston Repository record for The Deformation Characteristics of Deoxidation Products in Hot Rolled Steel. Available in 2 volumes. (opens in a new tab) Download PDF for The Deformation Characteristics of Deoxidation Products in Hot Rolled Steel. Available in 2 volumes. (opens in a new tab)

  15. The Relationship Between Microstructure and Damage Evolution in Hot-Rolled Complex-Phase Steel Sheet

    … produced industrially through a process of controlled rolling and cooling to produce desirable microstructures. Hole-expansion tests are typically used as a measure of edge formability for applications such as stretch-flanges. It has been shown that CP microstructures are susceptible to large …

    queens Repository record for The Relationship Between Microstructure and Damage Evolution in Hot-Rolled Complex-Phase Steel Sheet (opens in a new tab)

  16. Heat transfer during multiple jet impingement on the top surface of hot rolled steel strip

    … runout table (ROT) is a key processing step for hot rolled steel strip. It determines the final microstructure and thus mechanical properties as well as flatness of the hot band. The use of multiple jets during ROT cooling results in interactions between neighboring water jets which can affect …

    ubc Repository record for Heat transfer during multiple jet impingement on the top surface of hot rolled steel strip (opens in a new tab) Download PDF for Heat transfer during multiple jet impingement on the top surface of hot rolled steel strip (opens in a new tab)

  17. Extension of the Direct Strength Method to hot-rolled and welded H profile cross-sections

    … for determining the section capacity of hot-rolled profiles. In this system, there exists a discontinuity between the classes 2 and 3 under pure bending load condition, while for the class 4, the effective width method (EWM) must be used to account for local buckling phenomenon. With the …

    liege Repository record for Extension of the Direct Strength Method to hot-rolled and welded H profile cross-sections (opens in a new tab) Restricted access

  18. Flexural Behavior of Cold-Formed and Hot-Rolled Steel Sheet Piling Subjected to Simulated Soil Pressure

    Hot-rolled sheet piling has long-been believed to have a better flexural performance than cold-formed sheet piling based on a test conducted by Hartman Engineering twenty years ago. However, cold-formed steel can have similar strength to the hot-rolled steel This experimental program studied the …

    vt Repository record for Flexural Behavior of Cold-Formed and Hot-Rolled Steel Sheet Piling Subjected to Simulated Soil Pressure (opens in a new tab)

  19. Experimental Evaluation of Cold Formed Steel Walls Using Hot Rolled Steel Load Distribution Members Supporting Nucor-Vulcraft Joists

    A research study was conducted at South Dakota State University to evaluate the performance of cold formed steel walls subjected to loads from bar joists. To fulfill the objective of this research, 32 test specimens were constructed, instrumented, and tested to evaluate the effect of the load …

    sdstate Repository record for Experimental Evaluation of Cold Formed Steel Walls Using Hot Rolled Steel Load Distribution Members Supporting Nucor-Vulcraft Joists (opens in a new tab)

Page 1 of 9