Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"Hotwire Anemometer"”.
-
Measurement of three-dimensional horseshoe vortex flow in a duct
… measurement technique using a single slanted hotwire anemometer is evaluated. The hotwire anemometer measurements are compared with measurements of the same flow made with a five-hole pressure probe. A two-dimensional laminar and turbulent boundary layer analysis is performed at mid-height on …
-
Effect of non-uniform air-side velocity distribution on heat transfer model predictions for microchannel condenser.
… local airflow velocity was measured using a vane anemometer, particle image velocimetry and a hotwire anemometer depending on the method that suited a particular geometry. The measured airflow profile was applied to the model and the heat capacity prediction error was reduced by 0.5-1.5%.
-
Vortex Shedding and Interface Oscillations of Wind-Forced Liquid Drops
… while airflow fluctuations were measured using a hotwire anemometer. A synchronization technique was used in order to simultaneously measure drop oscillation and airflow unsteadiness. The data show that drop oscillation frequencies are independent of airflow speed but that the drop Bond number …
-
Aerodynamic Characteristics Of A Gas Turbine Exhaust Diffuser With An Accompanying Exhaust Collection System
… and total pressure profiles obtained with a hotwire anemometer and Kiel probe at the exit of the diffuser and at the exit of the ECB are also presented in this study. A total of 13 different ECB geometries are investigated at a Reynolds number of 60,000. Results obtained from these …
-
Evaluation of Ventilation Performance and Respirable Particles in Food Trucks
… of the food truck hood was measured using a hotwire anemometer to determine an exhaust flow rate, and capture and containment (C&C) was visually inspected with an air current smoke tube. Results: Three-day average concentrations of respirable particulate matter (RPM) ranged from 0.015 to …
-
Development of a new apparatus to measure flame spread through a free stratified fuel/air mixture: numerical modeling and experimental results
… to ensure a steady, laminar quality, as well as hotwire anemometer and thermocouple scans to measure velocity and temperature profiles, respectively; all of these agreed with model predictions. Preliminary experimental results show that it is possible to obtain a propagating flame in a …
-
Low Reynolds Number Aerodynamics of a UAV Wing under Icing Condition
… ice-accreted aerofoils. In addition to that, a hotwire anemometer was utilized for only Ice 1 configurations, to obtain the level of turbulence generated from the ice. Moreover, Large Eddy Simulations were conducted for specific cases, to achieve an in-depth understanding and visualization of …
-
The Effect of Freestream Turbulence on Separation at Low Reynolds Numbers in a Compressor Cascade
A parametric study was performed to observe and quantify the effect of varying turbulence intensities on separation and performance in a compressor cascade at low Reynolds numbers. Tests were performed at 25° and 37.5° stagger angle, negative and positive angles of incidence up until the point of …