Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Hotwire Anemometry"”.
-
Flow field measurements using hotwire anemometry
… controlled data acquisition system utilizing hotwire anemometry has been designed, built and installed in the Naval Postgraduate School Low Speed Wind Tunnel Facility. All relevant wind tunnel data is obtained by the use of a computer guided Hewlett Packard data acquisition system and a …
-
Stability Characteristics of a Low-Viscosity Axisymmetric Jet
… a transition to axisymmetric modes is observed. Hotwire anemometry results indicate the existence of sharp peaks in the frequency spectrum that vary as a function of Re and M. The flow visualization and hotwire anemometry results are used as markers to identify the possible existence of a global …
-
Low-speed wind tunnel flow quality determination
… static pressure taps, and a pressure rake; a hotwire anemometry system, and a linear traverse system. These were integrated with a data acquisition (DAQ) processor with analog to digital conversion and digital I/O boards, and controlled using in-house developed LabVIEW software. Testing showed …
-
A quantitative study of the lift-enhancing flow field generated by an airfoil with a Gurney flap.
… details, including force balance measurements, hotwire anemometry (HWA), high resolution particle image velocimetry (HRPIV), and time resolved particle image velocimetry (TRPIV). TRPIV is used to broaden the understanding of the interaction between the various vortex shedding modes which are …
-
Design and Evaluation of an Active Yaw and Turbulence Generation System to Produce Unsteady Flow in Automotive Wind Tunnels
… velocity data were obtained using two-component hotwire anemometry measurements that were spatially averaged. Yaw performance under different operating conditions, such as flap oscillation frequency and amplitude, was evaluated in terms of the phase-averaged flow behavior, the shape of the yaw …
-
Analysis of Wake Vortices of a Medium Range Twin-Propeller Military Cargo Aircraft Using Statistically Designed Experiments
… using both Particle Image Velocimetry (PIV) and Hotwire Anemometry (HWA) to yield average velocities, turbulence levels, vorticity strengths and Reynolds shear stresses in the wake of the model. The results of measurements showed that the vertical motions, horizontal motions, and vorticity …
-
Wind tunnel study of wind farms with alternating 2- and 3-bladed wind turbines
… velocity measurements were made with hotwire anemometry at various locations in the wake and the power output of turbines was measured simultaneously. Comparison of the flow between an array with only 3BT and that with alternating 2BT and 3BT shows enhanced mean velocity and reduced …
-
Vortex Formation and Shedding in the Wake of Surface-Mounted Finite Aspect-Ratio Square Cylinders
… using particle image velocimetry (PIV) and hotwire anemometry (HWA). Emphasis is put on understanding the formation and growth process of vortices, their interaction and separation from the feeding shear layer. The conventionally described vortex shedding process is reassessed. It is …
-
Interaction of High Aspect-Ratio Micro-Pillars with Wall Turbulence
… of HAMuP arrays with wall turbulence. Hotwire anemometry measurements were carried out in two different experimental facilities at three different streamwise locations to describe the interaction between the HAMuP array and the wallturbulence. There is a shift of the laminar sublayer …
-
Experimental Investigations on Wind Turbine Wake Dynamics
… a wind tunnel using high-frequency single-wire hotwire anemometry and multi-hole velocity probes. The investigation aimed to assess wind turbines’ performance and wake dynamics under diverse conditions and varying pressure gradients. Critical performance variables were parameterised to observe …
-
Experimental Investigations on Wind Turbine Wake Dynamics
… a wind tunnel using high-frequency single-wire hotwire anemometry and multi-hole velocity probes. The investigation aimed to assess wind turbines’ performance and wake dynamics under diverse conditions and varying pressure gradients. Critical performance variables were parameterised to observe …
-
Aerodynamics and aeroacoustics of flap side-edges
… pressures, particle image velocimetry, hotwire anemometry and on-surface microphones. Oil flow was performed to visualise the on-surface flow. A detached eddy simulation was performed on a geometry that consisted of a main element and a half span flap to understand the flowfield. From …
-
Vorticity structures behind wing tips
… distribution in the flow field, using hot-wire anemometry. In order to caiTy out measurements with the hotwire anemometry system, a new traverse mechanism was designed, manufactured and set-up. This traverse mechanism was integrated with the other test instrumentation to create a complete …
-
Distributed Roughness Receptivity in a Flat Plate Boundary Layer
… roughness. Naphthalene flow visualization and hotwire anemometry were used to characterize the boundary layer in the wakes of the different roughness configurations. For roughness Reynolds numbers (Re_(k)) between 113 and 230, the distributed roughness initiated small amplitude disturbances …
-
Clustering characteristics of large-stokes-number sprays interacting with turbulent co-flows
… Stereoscopic Particle Image Velocimetry, hotwire anemometry, Interferometric Laser Imaging for Droplet Sizing, Astigmatic Interferometric Particle Imaging, Mie scattering, shadowgraphy, and Particle Tracking Velocimetry are utilized. A new diagnostic, referred to as the Paired Astigmatic …
-
Experimental Analysis of Turbulent Structures and the Effects of Non-Equilibrium on an Axial Vortex
… to study the vortex, with flow visualization and hotwire anemometry being chosen for this experiment. There have been many inadequate mathematical models proposed in the past. The experimental results obtained were compared to the work of Ash, Zardadkhan and Zuckerwar (2011) taking into account …
-
A characterization of laminar and turbulent boundary layers for use in an investigation of boundary layer state effects on turbine blade film colling schemes
… recommissioned by the author. Pitot-static and hotwire anemometry were used to record data. Freestream turbulence was controlled by a passive turbulence generator and held constant for each scenario. It was found that a non-tripped flow with no suction yielded a boundary layer height of 1.045 …
-
Investigation of Unsteady Rotor Loading on the Performance and Aeroacoustics of an eVTOL Vehicle
… through synchronous load cell, microphone and hotwire anemometry measurements, permitted both time- and phase-averaged analysis of the rotor noise, aerodynamic loading and flow field characteristics across different flight conditions. The relationships between the rotor’s aerodynamic and …
-
Statistical Analysis of Multi-Row Film Cooling Flowfields
… The objective of the current study is to use hotwire anemometry as a tool to conduct 1D timeresolved turbulent measurements on the flow field of staggered multi-row film cooling arrays with cylindrical and diffuser shaped holes inclined at 20 degrees to the freestream. The study aims to …
-
Spatially Resolved Analysis of Flame Dynamics for the Prediction of Thermoacoustic Combustion Instabilities
Increasingly stringent emissions regulations have led combustion system designers to look for more environmentally combustion strategies. For gas turbine combustion, one promising technology is lean premixed combustion, which results in lower flame temperatures and therefore the possibility of …
Page 1 of 2