Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"Human-Induced Vibration"”.
-
HYBRID CONTROL OF HUMAN-INDUCED VIBRATION
… sometimes fall in the range of frequencies of human movement, which can possibly excite the structure in resonance resulting in vibration serviceability issues. One of the available techniques to reduce excessive responses is to use passive vibration control techniques such as Tuned Mass …
-
Experimental and numerical investigation of human-induced vibration performance in mass timber office buildings
Timber floors are susceptible to vibration due to their low mass and bending stiffness. Utilizing mass timber products in long-span scenarios, such as in office buildings, makes vibration an important design driver for structural engineers. The performance of long-span office floors is studied both …
-
A Physically Informed Data-Driven Approach to Analyze Human Induced Vibration in Civil Structures
… are interacting with buildings via structural vibration measurements. These vibration-based occupant inference algorithms (VBOI) have been developed to localize footsteps within a building, to classify occupants, and to monitor occupant health. This dissertation will present a three-stage …
-
Vibration Serviceability of Cold-Formed Steel Floor Systems
Excessive vibration in response to human activities has been a significant problem associated with lightweight steel floor systems, especially cold-formed steel (CFS) floors. Methods for accurately predicting these vibrations and evaluating floor systems are not readily available to the design …
-
Performance Criteria for Knee-Brace Timber Frames with Mortise and Tenon Joints
… loading to determine the fundamental period of vibration and to estimate damping. A relationship between the fundamental period and the mean roof height was fit to the test data using a power-law equation, and three sets of parameters were determined: a lower-bound equation for seismic loads, an …
-
Applications of Vibration-Based Occupant Inference in Frailty Diagnosis through Passive, In-Situ Gait Monitoring
This work demonstrates an application of Vibration-Based Occupant Inference (VBOI) in frailty analysis. The rise of both Internet-of-Things (IoT) and VBOI provide new techniques to perform gait analysis via footstep-induced vibration which can be analyzed for early detection of human frailty. Thus, …
-
Characterization of Human-Induced Vibrations
… explores the concept of utilizing structural vibrations to detect human falls for rapid rescue response. A human-induced vibration monitoring system is developed on the principles of the ideal fall detection system. The system was installed throughout the William Jennings Bryan Dorn Veteran’s …
-
Structural behaviour of CLT-concrete composite floors under service conditions
… However, CLT floors are susceptible to excessive vibrations and long-term deformation under the serviceability limit state condition. To address these limitations, the concept of CLT–concrete composite floor was introduced, in which a concrete top layer resists compression while a CLT bottom layer …
-
Vibration of floor structures subjected to crowd-rhythmic activities
Nowadays, building floors are prone to excessive vibrations induced by human actions, especially when a group of people perform rhythmic activities in a coordinated manner. Resulting effects on the floor occupants vary from perception, discomfort or even panic. This thesis addresses the development …
-
Serviceability of Steel-Timber Composite (STC) floors
… Furthermore, the long-term behaviour and vibration performance of the steel-CLT composite beams under service loads remains largely unexplored. This study demonstrates the environmental benefits (lower carbon footprint and energy consumption saving) of the STC system in the first step. …
-
Dynamická analýza lehké mostní konstrukce
Tato diplomová práce se zabývá odezvou lehké zavěšené lávky na dynamické buzení chodci a seismickým zatížením. Lávka byla modelována pomocí metody konečných prvků v softwaru Ansys verze 15.0 a zároveň také v softwaru RFEM verze 5.05. Modely byly mezi sebou srovnány. Odezva na dynamické zatížení …