Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"Hyper-elastic"”.

  1. Hyper-Elastic Triply Periodic Minimal Surfaces Design: Engineering Mechanics and Properties

    … field of engineering mechanics and properties of hyper-elastic TPMS designs, opening up avenues for innovative applications across various domains.

    unt Repository record for Hyper-Elastic Triply Periodic Minimal Surfaces Design: Engineering Mechanics and Properties (opens in a new tab)

  2. On the uncertainty quantification and non-linear hyper elastic simulation of biological tissues

    … mean values of these properties. To this end, a hyper elastic formulation for the nonlinear, transversely isotropic behavior of soft and hard tissue is utilized for the simulation and failure analysis of the proximal femur. Both linear and nonlinear material results are compared. The uncertainty …

    utc Repository record for On the uncertainty quantification and non-linear hyper elastic simulation of biological tissues (opens in a new tab)

  3. Multi-physics based simulation of hyper elastic soft robot motion with hydraulic actuation

    Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2026-05-01

    uiuc Repository record for Multi-physics based simulation of hyper elastic soft robot motion with hydraulic actuation (opens in a new tab)

  4. Experimental study of axial compressive behavior of a hyper-elastic annular seal constrained in a pipe

    The compressive behavior of an annular rubber seal constrained in a pipe and the interaction between the pipe and the seal was studied experimentally using a specially designed test fixture that allowed the concentric alignment of the seal within the pipe and its axial compression using an …

    manitoba Repository record for Experimental study of axial compressive behavior of a hyper-elastic annular seal constrained in a pipe (opens in a new tab)

  5. Simulation of micro-shaped charge experiments and analysis of shock states for a hyper-elastic solid

    … It also advances on shock states for a hyper-elastic solid using the Blatz-Ko equilibrium relations and general conservation laws. Basic Rankine-Hugoniot relations for longitudinal isotropic motion are determined. To further this topic, a study of anisotropic materials was conducted …

    uiuc Repository record for Simulation of micro-shaped charge experiments and analysis of shock states for a hyper-elastic solid (opens in a new tab)

  6. 3D Printing of Synthetic Organs: Mechanical Testing and Manufacturing Characterization of Blood Vessels

    … using the Uniaxial tensile test data, and the hyper-elastic model is applied to the study. Hyper-elastic models are used to describe the non-linear stress-strain behavior of these materials. Two prominent hyper-elastic models were used: the Yeoh 3rd order model and the Ogden 3rd order model and …

    ttu Repository record for 3D Printing of Synthetic Organs: Mechanical Testing and Manufacturing Characterization of Blood Vessels (opens in a new tab)

  7. Finite Element Calibration of Muscle for Human Body Models

    … focuses on calibrating and validating visco-hyperelastic material models for muscle tissue, specifically comparing the Ogden model and a General Hyper-elastic rubber model, implemented in LS-DYNA. The study leverages uniaxial compression test data at strain rates ranging from quasistatic …

    chalmers Repository record for Finite Element Calibration of Muscle for Human Body Models (opens in a new tab)

  8. Theorie und Numerik einer oberflächenorientierten Schalenformulierung

    … Within the scope of this thesis an anisotropic hyper elastic constitutive relation is given in order to obtain a first approximation of textile reinforced concrete's material behavior against the background of material theory. Furthermore a specification of the hyper elastic constitutive …

    qucosa-diss

  9. Surface textures for stretchable capacitive strain sensors

    … sensor with atextured pattern embossed into the hyper-elastic matrix yields approximately 30% increasein the gauge factor and 35% in signal accuracy, great linearity up to 30% strain, and overallsignal stability to empower SHM applications.</p>

    iastate Repository record for Surface textures for stretchable capacitive strain sensors (opens in a new tab)

  10. A CFD analysis on the fluid-structure interaction of offshore wave and wind energy devices

    … involves a flexible WEC constructed of hyper-elastic material, which is analysed by coupling a Finite Element Analysis (FEA) code into the current CFD solver. A strongly nonlinear hyper-elastic material is used for the WEC, and its dynamic response under regular waves is studied. Results …

    strathclyde Repository record for A CFD analysis on the fluid-structure interaction of offshore wave and wind energy devices (opens in a new tab)

  11. CONTINUUM SHARP INTERFACE MODELS FOR CONTACT LINES: ANALYSES AND SIMULATIONS

    … essentially different behavior of 3-D and 2-D hyper-elastic materials at this location. Finally, we explore with asymptotic analysis the definition of the apparent contact angle in electro-wetting on dielectric, showing that this well-defined angle can be taken as the one observed in …

    nus Repository record for CONTINUUM SHARP INTERFACE MODELS FOR CONTACT LINES: ANALYSES AND SIMULATIONS (opens in a new tab) Download file for CONTINUUM SHARP INTERFACE MODELS FOR CONTACT LINES: ANALYSES AND SIMULATIONS (opens in a new tab)

  12. Accelerating a Coupled SPH-FEM Solver through Heterogeneous Computing for use in Fluid-Structure Interaction Problems

    … to simulating free-surface flow interaction with hyper-elastic structures in which a smoothed particle hydrodynamics (SPH) solver is coupled with a finite-element (FEM) solver. SPH is a mesh-free, Lagrangian numerical technique frequently employed to study physical phenomena involving large …

    vt Repository record for Accelerating a Coupled SPH-FEM Solver through Heterogeneous Computing for use in Fluid-Structure Interaction Problems (opens in a new tab)

  13. Design and implementation of a high strain Town rate biaxial tension test for elastomeric materials and biological soft tissue

    … 2], and is necessary in order to characterise a hyper-elastic material model[3]. Furthermore, biaxial loading allows one to detect the anisotropy of the sample without introducing noise from inter-sample variability - unlike uniaxial tensile testing. This work develops a high strain rate bulge …

    cape-town Repository record for Design and implementation of a high strain Town rate biaxial tension test for elastomeric materials and biological soft tissue (opens in a new tab)

  14. Study on cardiac biomechanics using idealized and patient-specific models

    … model. For example, parametric study of hyper-elastic material is instructive in determining constitutive parameters of myocardium in a patient-specific model. The second objective of this study is to develop a workflow of building a patient-specific bi-ventricular model. It involves …

    texas Repository record for Study on cardiac biomechanics using idealized and patient-specific models (opens in a new tab)

  15. Simulating Human Pleura Performance in Medical Training Using Measured Tissue Mechanical Properties

    … fluid from around the lungs. Stress/strain based hyper-elastic and fracture properties calibrated from fresh human cadaver pleura were used to define performance requirements. Synthetic pleura were then prototyped and their mechanical properties were characterized. Commercial pleura simulants were …

    ucf Repository record for Simulating Human Pleura Performance in Medical Training Using Measured Tissue Mechanical Properties (opens in a new tab)

  16. Improving the Numerical Efficiency of a High Accuracy Shell Element for Soft Tissues

    … for irregular and complex geometries, and hyper-elastic, large, nearly incompressible anisotropic 3D deformations characteristic of soft tissues. The original proof of concept was developed in MATLAB, which despite known advantages, is very slow. As a result, computational times, even for …

    ottawa-retro Repository record for Improving the Numerical Efficiency of a High Accuracy Shell Element for Soft Tissues (opens in a new tab)

  17. Design and Development of an Anatomically Inspired Compliant Palm to Adaptively Reconfigure Precision and Power Grasps

    … the robotic hand as a series of interconnected hyper-elastic compliant beams (CB). Simulation of this Compliant Anatomical Palmar Mechanism (CAPM) found similar shaping characteristics in humans during grasping. Contact forces are mapped across the surface of a spherical object to estimate the …

    gatech Repository record for Design and Development of an Anatomically Inspired Compliant Palm to Adaptively Reconfigure Precision and Power Grasps (opens in a new tab)

  18. Characterisation and State Estimation of Magnetic Soft Continuum Robots

    … materials in magnetically actuated SCR, such as elastic modulus, hyper-elastic model parameters, and magnetic moment were determined. Additionally, the effect these parameters have on modelling and simulating these devices was investigated. Due to the nature of magnetic actuation, localisation is …

    whiterose Download PDF for Characterisation and State Estimation of Magnetic Soft Continuum Robots (opens in a new tab)

  19. Numerical simulations of the plastic deformation of insulating joints

    … three major parts: The first part was to compare hyper-elastic Neo-hookean and linear elastic material models for the insulating layer in the joint. The simulations showed that there was no significant difference in stresses or displacements between the two models. Investigating the effects of …

    chalmers Repository record for Numerical simulations of the plastic deformation of insulating joints (opens in a new tab)

Page 1 of 3