Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"HyperMesh"”.
-
Performance evaluation of distributed crossbar switch hypermesh
… such as the Distributed Crossbar Switch Hypermesh (DCSH), exhibit superior topological and performance characteristics over many traditional graph networks, e.g. k-ary n-cubes. Previous work on the DCSH has focused on issues related to implementation and performance comparisons with …
-
Drop Test Simulation of a Conformable CNG Tank by Finite Element Analysis using HyperMesh/RADIOSS
… guidelines for simulating a drop test using HyperMesh/RADIOSS, by analyzing the various simulation parameters and their effect on the drop test results. The material model used for representing the Aluminum alloy tank is Johnson Cook (LAW2 in RADIOSS). This report explains the process of …
-
An Analysis of NoCs in FPGAs
… (BHC), Generalized Hypercube (GHC), and Hypermesh. Three traffic patterns are considered, (a) Random-Uniform traffic patterns, (b) traffic patterns in Bitonic sorting algorithm, and (c) traffic patterns in FFT parallel algorithm.</p> <p>The analytic models for NoCs are compared to …
-
System level modelling and design of hypergraph based wireless system area networks for multi-computer systems
… hypergraph networks, the dual radio wireless hypermesh, represents a promising alternative high-performance wireless interconnection network for the future multicomputers to shared communication medium networks and/or ordinary wireless mesh networks, which have been widely used in current …
-
FINITE ELEMENT ANALYSIS OF CONFORMABLE CNG TANK – TOPOLOGY OPTIMIZATION AND DROP TEST SIMULATION
… using FEA (Finite element analysis) packages Hypermesh and Optistruct. The results show that optimized tank design has 28 % less mass as compared to the original structure. As per the optimized geometry, material on the edges of the tank can be toned down while some material could be added to …
-
Drop Test Simulation of a Conformable CNG Tank by Finite Element Analysis using ANSYS
… drop test criteria. These tests simulated in HyperMesh/RADIOSS by Sumit Bongir and in Abaqus by Paul Roehm have shown little discrepancies in results compared with physical test results. This report discusses the same experimental drop tests simulated using ANSYS and check for how good ANSYS …
-
A 3 D- FEM Study on the Stress Distributions in Pediatric Skull due to Impact from Free Fall
… simulation. Model was meshed and refined using Hypermesh software. RADIOSS solver of the Hyperworks package was used to analyze and draw results for the simulation process. Various types of stresses and strains were extracted and plotted against respective drop heights.
-
Generating CAD Parametric Features Based on Topology Optimization Results
… tests utilize the topology optimization software HyperMesh from Altair and the CAD package NX 4.0 from Siemens (formerly UGS). The voids from shape optimization in these tests are recognized inside of HyperMesh, fit with a simple parametric feature, and created in the part model using the Open C …
-
FINITE ELEMENT ANALYSIS OF CNG TANK DROP TESTS
… will be done by using various FEA packages like HyperMesh, HyperView and LS-Dyna.
-
A finite element analysis of a boa constrictor skull and the design of a jaw bone transducer
… These regions are corrected using the software HYPERMESH. The loading and boundary conditions along with the various properties like the Elastic modulus, Poisson's ratio are given to the FE model in ABAQUS before analyzing it. Electrical resistance strain gauges are simulated to have attached to …
-
Improving Damage Tolerance of Composite Sandwich Structures Subjected to Low Velocity Impact Loading: Experimental and Numerical Analysis
… finite element analysis was also performed using Hypermesh/LS-DYNA for 2024-T3 aluminum alloy sheet, neat CFRP and sandwich with Nomex® core with CFRP faceskins. Numerical vs. Experimental impact results were compared and comments regarding impact behavior of different candidate materials were …
-
A Study of Acoustic Boom Generation Due to Vibro-Acoustic Coupling in Passenger Cars
… performed for these simple car models (SCM). HyperMesh, LMS Virtual.Lab and MATLAB software packages are used for modeling, analysis and plotting of results. With the help of this thesis, an insight in the vibro-acoustic interaction for passenger cars is gained.
-
Finite element modeling of a commuter category aircraft seat under crash loading
… model was built from the solid model using the HyperMesh code. The model was first validated against the results of three drop tests conducted in the Rowan drop tower. The model was then validated against a full fuselage drop test of a Beechcraft 1900C, conducted by the FAA. The model was shown …
-
Hypergraph-Based Interconnection Networks for Large Multicomputers
… networks, the distributed crossbar switch hypermesh (DCSH), represents a promising alternative high-performance interconnection network for future large multicomputers to graph networks such as meshes, tori, and binary n-cubes, which have been widely used in current multicomputers. Channels …
-
Frontal Crash Analysis of a Conformable CNG tank using Finite Element Analysis
… of the chassis, brackets and tanks using HYPERMESH and RADIOSS. The frontal crash analysis is simulated according to FMVSS 208 standard for two impact velocities of 35 mph and 55 mph. CAD models of the brackets have been developed for this study. Material models of the truck chassis and …
-
A 3D FEM COMPARATIVE STUDY ON THE IMPACT RESPONSE BETWEEN HUMAN HEAD AND NOCSAE HEAD DUE TO FREE FALL
… impacts were simulated using RADIOSS solver in Hypermesh. Various parameters like contact force, linear acceleration and its components along each of the co-ordinate axes were extracted from the FE analysis. These values were utilized to calculate linear and angular acceleration for the entire …
-
Modeling of Bonnet for Pedestrian Research in LS-DYNA
… Through the use of GeoMagic studio, CATIA, HyperMesh, LS-Prepost and LS-DYNA, the FE models of all previously cited parts are prepared respectively. To investigate the response of the model to head and torso impacts, Euro-NCAP Head-form impacts tests were simulated and the responses …
-
Using finite element analysis of retroreflective raised pavement markers to recommend testing procedures for simulating their field performance
… impacts using the finite element tools Hypermesh and LS DYNA. He calibrated the material properties of the marker models to improve the tiremarker model. Based on the tire-marker impact simulations, the researcher concluded that the critical compressive stresses during impacts are …
-
Effects on Initial Fixation of Cementless Tibial Trays in Total Knee Arthroplasty
… was meshed with 0.8-mm tetrahedral elements (Hypermesh, Altair, Troy, MI) and Hounsfield units for each element were extracted from the DICOM using custom Matlab scripting and converted to bone mineral density using the known densities of the phantom. The ratio of tray coverage, the tibial …
-
A Novel Architecture, Topology, and Flow Control for Data Center Networks
… of emerging applications. Inspired by hypermesh topologies, this thesis presents a novel cost-efficient topology for large-scale Data Center Networks (DCNs), which is called HyperOXN. HyperOXN takes advantage of high-radix switch components leveraging state-of-the-art colorless …
Page 1 of 2