Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Hyperelastic material model"”.

  1. Experimental characterization of self-heating at intermediate strain rates for elastomers and evaluation of thermoelastic hyperelastic constitutive model

    … experimental method. The experimentally observed material behavior is later predicted by numerical simulation using a modified thermo-elastic hyperelastic material model. To achieve the research goals, two different elastomeric materials RTV 630 and Flexane 94 were tested in four different …

    wichita-thes Repository record for Experimental characterization of self-heating at intermediate strain rates for elastomers and evaluation of thermoelastic hyperelastic constitutive model (opens in a new tab)

  2. Evaluation of the approximations involved in analyzing high rate shear experiments of brain tissue using finite element analysis

    The results of brain tissue finite element (FE) models under high rate shear deformation are affected by several factors. This thesis evaluated the effects of hourglass control, Poisson's ratio and element type in such simulations. Moreover, a comparison of FE and analytical models were performed …

    temple Repository record for Evaluation of the approximations involved in analyzing high rate shear experiments of brain tissue using finite element analysis (opens in a new tab)

  3. Finite Element Modeling of Icd Lead Silicone Soft-Tips

    … introducer). In this analysis the soft-tips were modeled as axisymmetric with hyperelastic material properties assigned to the soft-tips. An Ogden, second order hyperelastic material model was used to describe the non-linear stress-strain behavior of silicone soft-tips. The finite element program, …

    calpoly Repository record for Finite Element Modeling of Icd Lead Silicone Soft-Tips (opens in a new tab)

  4. Effects of geometry and phase on material damage response under high-speed impact

    … main types of problems will be discussed: (1) modeling of quasi-static nano- and micro-indentation in PD; (2) solid impact experiments and simulations involving glass micro-spheres impacting coated and uncoated advanced ceramics, and sand particles impacting optical glasses; and (3) the …

    vcu Repository record for Effects of geometry and phase on material damage response under high-speed impact (opens in a new tab)

  5. Development of a vibration fatigue failure prediction model for automotive lamps made of polymers

    This thesis presents a technique for numerically modelling and predicting the fatigue life of automotive lamps made of thermoplastic polymers. The primary aim is to use the fatigue failure prediction technique developed in this research to address fatigue challenges in the design of automotive …

    oxford-brookes Repository record for Development of a vibration fatigue failure prediction model for automotive lamps made of polymers (opens in a new tab) Download PDF for Development of a vibration fatigue failure prediction model for automotive lamps made of polymers (opens in a new tab)

  6. A numerical homogenization approach to characterize in-plane anisotropic hyperelastic responses of a non-metallic honeycomb core

    … equivalent-continuum (effective) constitutive model. To accomplish this, an anisotropic hyperelastic constitutive model was developed to capture the effective constitutive relations of the bulk honeycomb core. The hyperelastic constitutive model was assembled using data obtained from an …

    wichita-thes Repository record for A numerical homogenization approach to characterize in-plane anisotropic hyperelastic responses of a non-metallic honeycomb core (opens in a new tab)

  7. STRESS OPTIMIZATION OF RHOMBIC TRANSPOSITION FLAPS USING THE FINITE ELEMENT METHOD

    … accomplish this objective, a finite element (FE) model was developed within a commercially available FE analysis package (ANSYS®). It used an Ogden hyperelastic material model with reliable geometry/meshing to ensure convergent results. It also incorporated a novel approach to model sutures. To …

    sask Repository record for STRESS OPTIMIZATION OF RHOMBIC TRANSPOSITION FLAPS USING THE FINITE ELEMENT METHOD (opens in a new tab)

  8. The Effects Of Different Spinal Fusion Instrumentation On Thoracic Vertebrae: A Parametric Finite Element Study

    … fused vertebrae. A ligamentous thoracic spine model was generated via CT scans for subsequent finite element analysis. A baseline model, non-instrumented model was created along with 16 different spinal fusion models. Fusion models differed in location of stopping point and screw length and …

    uab Repository record for The Effects Of Different Spinal Fusion Instrumentation On Thoracic Vertebrae: A Parametric Finite Element Study (opens in a new tab)

  9. Design of a morphing airfoil exhibiting bi-stability using topology optimization

    … optimization has been used to distribute material over the design domain and to tailor the nonlinear response of the baseline structure to achieve the desired bi-stable behavior. The large scale deformation undergone by the structure is modeled using a hyperelastic material model. The …

    uiuc Repository record for Design of a morphing airfoil exhibiting bi-stability using topology optimization (opens in a new tab)

  10. Flow-Driven Soft Robots: Theoretical, Computational and Experimental Investigations

    … is limited, this work introduces a theoretical model of a soft, slender cylindrical robot driven by incompressible fluid flow through embedded channels. The robot’s static deflection is described using a geometrically-exact equation derived from Euler-Bernoulli beam theory, with flow dynamics …

    concordia Download PDF for Flow-Driven Soft Robots: Theoretical, Computational and Experimental Investigations (opens in a new tab)

  11. Formation of wrinkles on a coated substrate

    … layer. To create the stress mismatch, the bulk material is first uni-axially stretched and then the thin layer is created by a low-pressure plasma treatment of the stretched bulk in a vacuum chamber. Under subsequent relaxation, wrinkles form. Their wavelength depends on the choice of the …

    qucosa-diss

  12. Understanding Failure Mechanisms for Two Colorectal Anastomosis Techniques

    … and to eventually apply it in a Finite Element Model (FEM). In doing so, the aim is to develop a resource “playground” for staple manufacturers to test and enhance current designs of staples and different anastomosis techniques before going to clinical trials. Firstly, to understand the colon …

    unlv Repository record for Understanding Failure Mechanisms for Two Colorectal Anastomosis Techniques (opens in a new tab) Download PDF for Understanding Failure Mechanisms for Two Colorectal Anastomosis Techniques (opens in a new tab)

  13. High-Order Static and Dynamic Tetrahedral Mesh Generation Algorithms for Use in Finite Element Modeling and Simulation

    Computational modeling and simulation of real-world problems, e.g., various automotive, aerospace,and biomedical applications, often involve geometric objects bounded by curved surfaces. Computational modeling of such objects using curvilinear high-order meshes ensures that the curved features …

    ku Repository record for High-Order Static and Dynamic Tetrahedral Mesh Generation Algorithms for Use in Finite Element Modeling and Simulation (opens in a new tab)

  14. Feasibility Assessment of Compliant Polymers in TKR

    … considerable interest in more cartilage-like materials for the tibial inlay of a TKR. Compliant, rubbery polymers may be a first step towards such a material. In this thesis, finite element analysis (FEA) was utilized to assess the feasibility of polycarbonate urethane (PCU) in a TKR …

    queens Repository record for Feasibility Assessment of Compliant Polymers in TKR (opens in a new tab)

  15. Orientation of short steel fibres in concrete: measuring and modelling

    … from the hardened concrete matrix and modelling of composite properties considering the orientation distribution of fibres. Two methods of measuring fibre orientations are developed: slicing method and X-ray micro-tomography. Parts extracted from the full-size floor-slabs are used as …

    aalto Repository record for Orientation of short steel fibres in concrete: measuring and modelling (opens in a new tab)

  16. MECHANICAL CHARACTERIZATION OF NORMAL AND CANCEROUS BREAST TISSUE SPECIMENS USING ATOMIC FORCE MICROSCOPY

    … error sources. Next, a parametric finite element modeling based approach was proposed in order to account for spatial heterogeneity in the tissue response. By using an exponential hyperelastic material model, it was shown that it is possible to obtain more accurate material properties of tissue …

    maryland Repository record for MECHANICAL CHARACTERIZATION OF NORMAL AND CANCEROUS BREAST TISSUE SPECIMENS USING ATOMIC FORCE MICROSCOPY (opens in a new tab)

  17. Development Of A Finite Element Pelvis And Lower Extremity Model With Growth Plates For Pediatric Pedestrian Protection

    Finite element (FE) model is a useful tool frequently used for investigating the injury mechanisms and designing protection countermeasures. At present, no 10 years old (YO) pedestrian FE model has been developed from appropriate anthropometries and validated against limitedly available impact …

    wayne-thes Repository record for Development Of A Finite Element Pelvis And Lower Extremity Model With Growth Plates For Pediatric Pedestrian Protection (opens in a new tab)

  18. Mechanical Interfacial Locking and Multiscale Modeling Of Reinforced Thermoplastic Composites for Structural Applications

    … applications several challenges pertaining to material design and manufacturing effects need to be addressed. To this end, a computational study is carried out to address three key challenges that limit the design and development of RTPC structures: (a) enhancing filler/matrix bonding strength …

    clemson Repository record for Mechanical Interfacial Locking and Multiscale Modeling Of Reinforced Thermoplastic Composites for Structural Applications (opens in a new tab)

  19. Multi-Scale Fluid-Structure Interaction Model Analysis of Patient-Specific Geometry for Optimization of LVAD Outflow Graft Implantation: An Investigation Aimed at Reducing Stroke Risk

    … study, a pulsatile fully compliant vessel wall model is developed to further establish this hypothesis. A time-dependent multi-scale Eulerian Computational Fluid Dynamics (CFD) analysis of patient-specific geometry models of the VAD-bed vasculature is coupled with a 3D Finite Element Analysis …

    ucf Repository record for Multi-Scale Fluid-Structure Interaction Model Analysis of Patient-Specific Geometry for Optimization of LVAD Outflow Graft Implantation: An Investigation Aimed at Reducing Stroke Risk (opens in a new tab)

  20. Modelling dissection of the arterial wall

    … This thesis aims to develop computational models to simulate the inflation and propagation of a tear in the arterial wall and to investigate the mechanical issues in arterial dissection, with mainly focusing on the effects of the fibre orientation, geometry of the tear and residual stress …

    glasgow Download PDF for Modelling dissection of the arterial wall (opens in a new tab)

Page 1 of 2