Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 75 for “"I-beam"”.
-
Lateral buckling of tapered, cantilever I-beam
… taper on the lateral stability of a cantilever I-beam loaded with a point load at its end in the plane of maximum flexural rigidity. Both the flange and the web are tapered linearly. The load is allowed to move with the structure as it deflects, but its direction does not change, i.e., the load …
-
BEHAVIOUR OF BOX-COLUMN TO I-BEAM CONNECTIONS
… saving is in the fabrication and erection of beam-to-column connections which is inherent in every building. Due to the repetitive nature of these connections, even a minor material or labour saving in one connection is compounded throughout the entire building, giving rise to substantial cost …
-
Behavior of Skewed Continuous I Beam Bridge Structures
… and the physical properties of the slab and the beams are also studied. The structures analyzed cover a wide range of structures encountered in highway construction. From the values obtained in the present study, provisions for the design of skew bridges are developed.
-
An analysis of an I-beam girder bridge
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1949
-
Validation of prestressed concrete I-Beam deflection and camber estimates.
… of prestress losses due to thermal effects, and PBEAM time-dependent camber modeling to investigate various effects including creep and shrinkage, girder support conditions during storage and age at erection. Extensive historical fabrication data was collected from two precasting plants (referred …
-
Structural Behaviour of Concrete-filled Elliptical Column to I-beam Connections
… a lack of investigations on EHSs, especially on beam to elliptical column connections which are essential in framed structures. The structural behaviour of elliptical column to I-beam connections under bending is studied in this thesis to fill the research gap. Overall ten specimens with various …
-
A check of the design of an I-beam highway bridge
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1948
-
An Analysis of the Torsional Rigidity of An Intermittently Stiffened I Beam
Made available in DSpace on 2014-12-04T23:11:09Z (GMT). No. of bitstreams: 1 6402852.pdf: 2172742 bytes, checksum: a6aad8e18658fb2804a062fffc869b11 (MD5) Previous issue date: 1963
-
A Theoretical and Experimental Investigation of the Lateral Buckling of an Intermittently Stiffened I Beam
Made available in DSpace on 2014-12-10T17:25:39Z (GMT). No. of bitstreams: 1 6706733.pdf: 1553191 bytes, checksum: c67c1b0fe16bfabb7daddbce5ebe160c (MD5) Previous issue date: 1966
-
Development of design criteria for continuous composite I-beam bridges with skew and right alignments
… of two lane, two span, continuous composite I-beam bridges were investigated. A linear, elastic, finite element analysis of 288 bridges was done for both positive and negative moments. All these structures had a regular geometry, with a uniform concrete deck resting on five identical prismatic …
-
Development of Design Guidelines for Soil Embedded Post Systems Using Wide-flange I-beam to Contain Truck Impact
… groups of soil embedded posts tied together by beams if the soil is not hard enough for a single post to stop the in-coming truck. The design of these soil embedded posts needs to take account a number of influencing factors which include the soil strength and stiffness, the post strength and …
-
An Innovative and Robust Approach to Studying Fatigue Properties of Aluminum 7075 Bar Utilizing Miniature I-Beam Geometry
… temperature. This approach is illustrated on I-beam specimen manufactured from Aluminum 7075-T7351 Bar. The crack growth rates from the experimental data are then compared with literature results for plates, sheets, and extrusions of the same material. The research completed reveals the test …
-
A Computer Method to Evaluate the Vibration Response of Stiffened Floor Systems to Impact Load
… of floor systems with steel joist or I-beam stiffeners supporting a concrete slab have a tendency to sustain perceptible vibration due to small impacts. An engineering design aid, utilizing a small micro-computer and a BASIC computer program, was developed to analyze rectangular floor …
-
Lateral buckling of uniformly loaded, tapered, cantilever I-beams
… stability of a uniformly loaded, cantilever I-beam. The I-beam is loaded along its entire length in the plane of maximum flexural rigidity. The web and flanges are tapered linearly from the free end to the fixed end. Results are obtained for three positions of load application: at the top …
-
Approximations to Structural Parameters by Various Numerical Methods
… of some typical structural shapes. The beams were (a) uniform EI, (b) nonuniform EI with rectangular cross-sections, and (c) I-beam cross-sections from an actual structure. The I-beam represents on span of the Big Sioux River Bridge crossing of Interstate 29 in Moody County, South …
-
Flexural Behaviour of Engineered Cementitious Composites : Light Weight Concrete Encased Steel Beams
… when comparing with a normal strength I–beam, a laterally unrestrained HSS I–beam, depending on the slenderness of the section, is more vulnerable to both local buckling and lateral torsional buckling (LTB) as well as their combined effects. As a result, the HSS I–beam is more likely to …
-
Survey of older beam and slab bridges of Tennessee
<p>A survey was conducted of older beam and slab bridges in the state of Tennessee. The types of bridges found were concrete slab, through girder, deck girder (steel, concrete and timber), and culverts. Simple, continuous and cantilever span types were identified. A historical context of the …
Page 1 of 4