Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 84 for “"I-beams"”.
-
BEHAVIOUR OF STEEL I-BEAMS CURVED IN PLAN
… to study the behaviour, analysis and design ofI-beams curved in plan by both theoretical and experimental methods. The theoretical methods consist of two parts: firstly the numerical method, i.e. the finite element technique using ABAQUS, to predict the ultimate strength of such beams, and …
-
Stress Intensity Factors for Structural Steel I-beams
… intensity factor (SIF) solutions for cracks in I-beams. Previous work cannot provide satisfactory solutions. In this study, the finite element analysis method was used to develop accurate SIFs for two-tip and three-tip cracks in I-beams under tension or bending. Cracked I-beams were modeled with …
-
The mechanics of plastic-aluminum composite I-beams
… an initial investigation of the mechanics of I-beams developed with plastic-aluminum composite technology. Plastic-aluminum composites in structural beam/frame/truss elements are a relatively new concept that has seen little, if any, application in modern construction. This technology has …
-
Lateral Buckling of I-Beams Supported by Cables
Made available in DSpace on 2015-05-12T17:06:22Z (GMT). No. of bitstreams: 2 license.txt: 4848 bytes, checksum: 96035ab3f5e1c23cc7138a224ce498bd (MD5) 0019890.PDF: 3534863 bytes, checksum: 60676031b721ed87be0de8f22541fbba (MD5) Previous issue date: 1956
-
Cyclic lateral-torsional buckling of short I-beams
… buckling and post-buckling behavior of short I-beams subjected to cyclically reversing loads. The eccentrically braced frame, used in the earthquake resistant design of building structures, provides an application in which lateral buckling of short I-beams under cyclic loading is relevant. Our …
-
Lateral buckling of uniformly loaded, tapered, cantilever I-beams
The purpose of this thesis is to report a theoretical investigation concerned with the effect of web and flange taper on the lateral stability of a uniformly loaded, cantilever I-beam. The I-beam is loaded along its entire length in the plane of maximum flexural rigidity. The web and flanges are …
-
Nail-glued wood-plywood I-beams for residential construction
Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Dept. of Forest Products, 1959
-
Behaviour of steel I-beams reinforced while under load
Steel beams often require reinforcing while they are under load. This may be due to inappropriate design, defective constructions, structure aging, additional bearing requirements, material deterioration, or accidental damage. A common method for reinforcing steel members is by attaching a steel …
-
Simply supported steel I-beams prestressed with horizontal restrained tendons
This study is concerned with the prestressing of rolled sections by means of a tendon which at various points throughout its length is restrained from moving relative to the cross section but is free to move through the section. The theoretical behavior during prestressing and subsequent loading is …
-
Inelastic Behavior of Steel I-beams with Hexagonal Web Cutouts
… the maximum load-carrying capacity of steel I-beams with hexagonal web cutouts. When the cutouts are arranged as shown in Figure 1-a, the beam presents an appearance exactly as does a castellated beam. A word relative to castellated beams may be appropriate here, however. A castellated beam …
-
Reliability analysis of waferboard I-beams : a damage accululation approach
… reliability has been examined for waferboard I-beams and solid wood joists. The reliability indices of the two different joist types were compared to target reliability indices and to each other to attempt to ascertain the performance of the waferboard I-beams. The analysis was performed using …
-
Behavior of Hot Rolled Asymmetric Steel I-Beams: Concept to Construction
… and production of proof-of-concept (POC) beams. The top flange of W-sections was reduced, and the beams were reheated to simulate the cooling of future hot-rolled asymmetric beams. The POC beams were used for further validation of the simulated global deformations and provided specimens …
-
A study of strength properties of plywood web wooden I beams
Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Dept. of Forest Products, 1960
-
Tensile stresses in the end regions of pretensioned I-beams at release
… the cracking in end regions of pretensioned I-beams at prestress transfer. This horizontal cracking near the end face of the girder is caused by the tensile forces that develop perpendicular to the line of action of the prestressing force after it has been applied. After seeing this cracking …
-
Transfer stresses in the end-zones of pretensioned prestressed concrete I-beams
Abstract Not Provided.
-
Full-Scale Floor System Testing for Future Hot-Rolled Asymmetric Steel I-Beams
… buildings. However, hot-rolled asymmetric I-beams, or A-shapes, are a path forward to enable structural steel into the residential market. The wider bottom flange allows for their use in shallow-depth steel-concrete composite floor systems since the bottom flange can support precast concrete …
Page 1 of 5