Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"IDDES"”.
-
Development of an advanced Hybrid (U)RANS/LES turbulence models using Scale Adaptive Simulation (SAS) method
… as Improved Delayed Detached Eddy Simulation (IDDES) does not provide consis- tent performance under different fluid flow cases and suffers from several issues such as log-layer mismatch in attached flows, sensitivity to anisotropic grid design, and need for an ad-hoc turbulence generation …
-
Wall-Modelled Large-Eddy Simulations of Non-Equilibrium Turbulent-Boundary Layer with Roughness
… Improved Delayed Detached-Eddy Simulation (IDDES) [Shur et al., Int. J. Heat Fluid Flow, Vol. 29, pp. 1638-1649, 2008] and Integral Wall-modelled Large-Eddy Simulations (iWMLESs) were conducted. The Drag Model (DM) of Varghese and Durbin [J. Fluid Mech., Vol. 897, pp. A10, 2020] is also used …
-
Large-Eddy and Wall-Modeled Simulations of Turbulent Flow Over Two-dimensional River Dunes
… DES, Delayed DES (DDES), and Improved DDES (IDDES). Simulations are carried out at two different Reynolds numbers, Re_b = 18 900 and 50 000, based on bulk velocity and average dune height. Wall-resolved LES calculations are used to investigate the accuracy of the present wall-layers. Compared …
-
Transient CFD analysis of autorotation using hybrid LES and adaptive mesh morphing techniques
… as improved Delayed-Detached-Eddy Simulation (iDDES), are shown to provide very similar results to those of pure LES. Therefore hybrid models are found to be a good alternative to use for the simulation of FSI in autorotation, saving valuable computational time . The iDDES method combines both …
-
Hybrid RANS-LES Hemolytic Power Law Modeling of the FDA Blood Pump
This study applies the SBES and IDDES hybrid RANS-LES turbulence models along with the K-ω SST model to four flow conditions of the FDA blood pump. Validation of all three turbulence models show good agreement with experimental pressure and velocity fields. Evaluation of turbulent kinetic energy …
-
Examination of robustness and accuracy of CFD simulations for external aerodynamics of commercial vehicles
… base wake. Finally, the benefits of using an IDDES compared to a RANS method will be highlighted. Comparing the yaw weighted average error of the drag prediction the IDDES methods resulted in approximately half the error of the RANS methods. Secondly, the modelling of the wind tunnel …
-
Numerical Study of the Flow Characteristics of Circular Twin Synthetic Jets
… using Improved Delayed Detached Eddy Simulation (IDDES). The simulations were performed at a fixed Reynolds number based on the average jet-exit velocity and nozzle diameter (d) of Re = 130 and a dimensionless stroke length of L₀/d = 6.7, across four spacing ratios (s/d = 1.2,2.0,3.0, and 4.0 …
-
Numerical Investigation of the Unsteady Turbulent Wake Regimes of a Notchback Ahmed Body
… improved delayed detached eddy simulations (IDDES) were conducted at two Reynolds numbers, Reh = 10000 (denoted as Re1E4) and Reh = 50000 (Re5E4), representing symmetric and fully asymmetric flow regimes, respectively. Detailed aspects of the wake dynamics, including the mean flow, Reynolds …
-
Computational Acoustic Beamforming of Noise Source on Wind Turbine Airfoil
… the Improved Delayed Detached Eddy Simulation (IDDES) turbulence model. The CAA calculation is conducted by an in-house code using impermeable Ffowcs-Williams and Hawkings (FW-H) equation for static sound source. The acoustic beamforming is performed by an in-house Delay and Sum (DAS) beamformer …
-
A new formulation for delayed detached eddy simulation based on the Smagorinsky LES model
… as the Delayed DES (DDES) and Improved DDES (IDDES) with increasing complexity, which negatively impacted the readability of the model.</p> <p>This is the motivation to explore an alternate formulation for DES which aims to correct the issues found in the original DES, while at the same time …
-
Fluid-Structure Interaction Analysis of Multiple Wingsails
… using improved delayed detached eddy simulation (IDDES). The FEA was based on a simplified structural model, where the wingsails are regarded as solid bodies, and the tip displacement due to global bending was focused. The arbi- trary Lagrangian-Eulerian (ALE) approach was implemented with mesh …
-
Development of the ℓ² ω Delayed Detached Eddy Simulation model with dynamically computed constant
… S. Gritskevich et al., "Development of DDES and IDDES formulations for the k omega shear stress transport model," Flow, Turbul. Combust. 88, 431 (2012)] are not conducive to the implementation of a dynamic procedure due to uncertainty</p> <p>as to what form the eddy viscosity expression takes in …
-
CFD Investigation of Wind-powered Ships under Extreme Condition: Simulations on the NACA-0015 Foil under Deep Stall Condition
… cases, the k − ! SST model and the k − ! SST IDDES model are used. The simulation results are compared with experimental data. These simulation cases provide the loading condition on foils and characters of the flow field. The possible causes of error, especially the overestimation of the …
-
Numerical Study of Nozzle Geometry Effects on Three-Dimensional Offset Synthetic Jets
… improved delayed detached eddy simulations (IDDES). Simulations were conducted at a Reynolds number based on the maximum jet-exit velocity and nozzle diameter (d) of Re_0 = 580, and at a fixed actuation frequency of 300 Hz. Four nozzle geometries with identical cross-sectional area and an …
-
Numerical Study of Turbulent Flow Characteristics of Wall-Attaching Synthetic Jets
… improved delayed detached eddy simulations (IDDES). The simulations were conducted at a Reynolds number based on the average jet-exit velocity and nozzle diameter of Re = 565, with an actuation frequency of 300 Hz. Four offset height ratios (G/d = 1,2,3 and 4, where G is the distance from the …
-
Numerical Study of the Unsteady Wake Dynamics of Finite Wall-Mounted Rectangular Cylinders in a Thick Turbulent Boundary Layer
… improved delayed detached eddy simulations (IDDES). The thick TBL promotes earlier shear layer reattachment on the lateral and top faces of each cylinder and significantly reduces drag while increasing lift for CR≥2.5 compared to uniform or thin TBL. Except for CR=1.0, where no reattachment …
-
Development and Application of Hybrid Wray-Agarwal Turbulence Model and Large-Eddy Simulation
… Improved Delayed-Detached Eddy Simulation (IDDES) and Elliptic Blending are also considered as further refinements of WA model to improve its accuracy.
-
Verification and Validation Study of CFD Simulations of Semi-Submersible Platform for Floating Offshore Wind Turbine
… closed by KSKL turbulence model. While k-ω SST-IDDES turbulence model is used in irregular wave simulation. In the remaining simulations, laminar flow assumption is adopted. Volume of Fluid (VOF) method is utilized to model the free surfaces. A six degree-of-freedoms (DOFs) motion solver is used …
-
CFD investigation of wind powered ships under extreme conditions
… to show the effects of dynamic stall. In 3D, the IDDES model has been used to compute the lift and drag coefficients with 3D effects and to determine the interaction effects between multiple wings CFD results show that lift and drag forces slightly differ from the forces seen in previous wind …
-
Improved Methods For Scale-Resolved Turbulence Modeling In Computational Fluid Dynamics Simulations
… improved delayed detached eddy simulation (IDDES), and dynamic hybrid RANS-LES (DHRL). The DHRL model includes both the standard formulation that has been previously documented in the literature as well as the new modified version developed specifically to improve predictive capability for …
Page 1 of 2