Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 9 of 9 for “"IEEE C37.118"”.

  1. Using the IEEE C37.118 Protocol to Add Hardware in the Loop to the CYPRES Testbed

    … inputs from a power grid simulator using the IEEE C37.118 industry standard protocol and output actual voltage signals to a relay protection system. In this way, the relay can be tested and perform actions as if it were connected to a full-scale power grid network. This was accomplished by …

    tamu Repository record for Using the IEEE C37.118 Protocol to Add Hardware in the Loop to the CYPRES Testbed (opens in a new tab)

  2. IEC 61850 BASED GOOSE AND SV SERVICES FOR WIDE-AREA PROTECTION AND AUTOMATION

    … control and protection applications. Similarly, IEEE C37.118 offers guidelines to implement Phasor Measurement Units (PMUs) and Phasor Data Concentrators (PDCs) to support Wide-Area Monitoring Protection and Control (WAMPAC). Existing phasor and frequency estimation algorithms in PMUs lack the …

    mtu Repository record for IEC 61850 BASED GOOSE AND SV SERVICES FOR WIDE-AREA PROTECTION AND AUTOMATION (opens in a new tab)

  3. Steady State Testing and Analysis of a Phasor Measurement Unit

    … NASPI to test for compliance to the existing IEEE C37.118 standard. This thesis presents the development of a Steady State Test System at Virginia Tech based on the NIST Steady State Testing system. The various issues that were faced during the process of development are discussed and the …

    vt Repository record for Steady State Testing and Analysis of a Phasor Measurement Unit (opens in a new tab)

  4. Construction of a phasor measurement unit (PMU) for power system applications

    … extracted from the OpenPMU group and the IEEE C37.118-2011 standard. The functionality of the PMU was tested by performing important power system experiments which compared measured result of voltage magnitude, phase angle and frequency of a balanced three phase signal from a rapid …

    manitoba Repository record for Construction of a phasor measurement unit (PMU) for power system applications (opens in a new tab)

  5. The Virginia Tech Calibration System

    … The current synchrophasor standard, the IEEE C37.118-2005 Synchrophasor Standard, covers adequately the steady-state characterization of PMUs but does not specify transient condition requirements. The North American Synchrophasor Initiative (NASPI) has developed a guide outlining the …

    vt Repository record for The Virginia Tech Calibration System (opens in a new tab)

  6. The Virginia Tech Phasor Data Concentrator Analysis & Testing System

    … center. The current Synchrophasor standard, IEEE C37.118-2005 covers adequately the steady state characterization of PMUs but does not specify requirements for PDCs. Having recognized the need for such a standard for PDCs, the North American Synchrophasor Initiative (NASPI) has developed a …

    vt Repository record for The Virginia Tech Phasor Data Concentrator Analysis & Testing System (opens in a new tab)

  7. Communication network design and evaluation for WAMPAC in smart grid

    … assignments of traffic flows according to the IEEE C37.118 standard and proposed advanced WAMPAC applications are analysed through simulation for the existing United Kingdom power system. Performance of the system is verified in terms of link capacities, network topologies and QoS, and results …

    strathclyde Repository record for Communication network design and evaluation for WAMPAC in smart grid (opens in a new tab)

  8. Evaluation and Standardizing of Phasor Data Concentrators

    … clear. For this reason, standards such as IEEE C37.118.2-2011 [5] have been proposed to help make operation as uniform as possible. Unfortunately, the standards for PDCs are lacking and tend to only set up communication protocols. To help normalize PDCs, these standards need to be expanded …

    vt Repository record for Evaluation and Standardizing of Phasor Data Concentrators (opens in a new tab)

  9. Enabling Communication and Networking Technologies for Smart Grid

    Transforming the aging electric grid to a smart grid is an active area of research in industry and the government. One of the main objectives of the smart grid is to improve the efficiency of power generation, transmission and distribution and also to improve the stability and the reliability of …

    vt Repository record for Enabling Communication and Networking Technologies for Smart Grid (opens in a new tab)