Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"IN 718"”.
-
Fiber laser welding of nickel-based superalloy Inconel 718
Inconel 718 (IN 718) is widely used in applications, such as aircraft and power turbine components. Recently, fiber laser welding has become an attractive joining technique in industry for fabrication and repair of service-damaged components. However, a major limitation in the laser welding of IN …
-
Mechanical Properties of Inconel 718 Processed Using Electron Beam Free Form Fabrication (EBF<sup>3</sup>)
… that works efficiently with the wieldable alloy Inconel 718 (IN 718). EBF3 is a developing additive manufacturing (AM) process that can manufacture IN 718 parts directly from computer aided design (CAD) data. EBF3 can produce parts significantly faster and more energy efficient than competing IN …
-
Characterization of linear friction welded in-service Inconel 718 superalloy
… this thesis was to study the suitability of the linear friction welding (LFWing) process to manufacture or repair of Inconel® 718 superalloy (IN 718) aero engine BLISKs. This was achieved by simulating a LFW joint made of virgin (V) and in-service (IS) (from samples extracted from an actual …
-
Influence of specimen geometry on fatigue crack growth rates in cast and forged Ti- and Ni-based alloys
Assuming linear elastic fracture mechanicsl two cracks with the same stress intensity factor will grow with the same rate, regardless of the geometry of the body. However, at GKN Aerospace test results from fatigue crack growth testing of C(T) and Kb specimens made from castings have shown distinct …
-
Sol-gel preparation and characterization of corundum based ceramic oxidation protection coatings
The Ni-base superalloy, IN-718, has been coated with alumina sols. Coated surfaces, carrying alumina layers having thicknesses between 0.6 μm and 3.6 μm show a significantly reduced oxidation rate when compared with uncoated reference surfaces, even if heating temperature is increased up to 900 °C …
-
Thermal Analysis Of Additively Manufactured Aluminum F357 And Inconel 718 In High-Enthalpy Hypersonic Flows
… vehicle can experience local temperatures exceeding 3000 K, which can severely degrade any material not rated to withstand such extreme environments. This warrants the need for developing novel high-temperature resistant materials to be safely integrated into hypersonic vehicles. Additive …
-
Corrosion Behavior of High Entropy Alloys in Molten Chloride and Molten Fluoride Salts
… alloys (CCAs) represent a new paradigm in structural alloy design. Molten salt corrosion behavior was studied for single-phase HEAs such as TaTiVWZr and HfTaTiVZr, and multi-phase HEAs such as AlCoCrFeNi2.1. De-alloying with porosity formation along the exposed surface and fluxing of …
-
Microstructures and properties of additively manufactured alloys processed by severe plastic deformation
… by severe plastic deformation (SPD) was investigated in this PhD project. In this study, experiments were conducted on single-material 316L stainless steel (316L SS) and multi-material 316L SS/nickel 718 (IN 718) superalloy fabricated by selective laser melting (SLM) and then processed by …
-
The Role of Slip System Activation on Ni-Based Superalloy High Temperature Fatigue
Nickel-based superalloys are used extensively in the aviation industry, particularly in aircraft engine components. These materials are desirable due to their high strength, resistance to creep, corrosive environment, and high temperature. It has been well documented that material fatigue is …
-
Structural Evaluation of Defects in Bolt Hole Threads
Threaded bolted joints are a critical fastening method in aerospace engineering, used to connect structural components under demanding mechanical and thermal conditions. In many of the assemblies manufactured at GKN Aerospace, bolts are installed directly into tapped holes machined into large, …
-
Fundamental Characterization of Nickel-Based Superalloys Subject to Laser Peening and Thermal Microstructure Engineering
… advancements require material functionality and integrity under increased load and temperature. While conventional material improvement methods offer the benefit of enhancement through work hardening, their efficacy begins to wane under the effects of elevated temperatures. To remedy this, an …
-
18F-FDG PET/CT oncológico no Estado do Rio Grande do Norte: caracterização dos usuários e indicações do exame
Cancer has contributed dramatically in terms of morbidity, mortality and costs for healthcare systems in the world. The management of these patients is complex and new technologies have emerged for their best care. Positron emission tomography associated with computed tomography (PET/CT) is a …
-
Material modeling for multistage tube hydroforming process simulation
The Aerospace industries of the 21st century demand the use of cutting edge materials and manufacturing technology. New manufacturing methods such as hydroforming are relatively new and are being used to produce commercial vehicles. This process allows for part consolidation and reducing the number …
-
UNDERSTANDING PROCESSING-MICROSTRUCTURE-PROPERTY RELATIONSHIPS AND THE ASSOCIATED DEFORMATION MECHANISMS IN ATI 718PLUS NI-BASED SUPERALLOY
… alloy system that exhibits a good combination of high-temperature properties, such as resistance to thermal creep deformation, oxidation, and corrosion and has a service temperature often above 0.7 times the absolute melting temperature. Alloy ATI 718Plus is a relatively new Ni-based …
-
Annular Beam Shaping And Optical Trepanning
Percussion drilling and trepanning are two laser drilling methods. Percussion drilling is accomplished by focusing the laser beam to approximately the required diameter of the hole, exposing the material to one or a series of laser pulses at the same spot to melt and vaporize the material. Drilling …
-
The high T’ang poet Meng Hao-jan : studies in biography and textual history
The dissertation consists of two distinct parts. Part I is a study of the text of Meng Hao-jan's collected works. All available editions (32) were collated in full, along with the text of his poems as they appear in thirteen T'ang and Sung dynasty anthologies. The editions are divided into six …
-
Characterization and modeling of the thermomechanical fatigue crack growth behavior of Inconel 718 superalloy
Understanding the impact of the complex and harsh thermomechanical environment aircraft turbine engines subject their components to is critical for designers and operators to ensure the safe and efficient operation of the systems they are responsible for. The combined effects of elevated …
-
Obesity, Adipocytes and Breast Cancer – Insights from Translational Studies
Background: Being overweight is becoming the new normal, and more than half of the adult Swedish population is overweight which poses a risk to public health. Overweight and obese women have both an increased risk and a worse prognosis for breast cancer, compared with women of normal weight. The …