Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 174 for “"INGOTS"”.
-
Macrosegregation in casting and ingots
… <p>A number of commercial castings and ingots were examined. The majority were found to contain macrosegregation although its magnitude seldom exceeded ± 10% of the nominal composition. It was felt that contraction fluid flow had been the dominant segregation mechanism in operation, …
-
Optimization of furnace residence time and ingots positioning during the heat treatment process of large size forged ingots
… of residence time of large size forged ingots within a tempering furnace proposing a novel hybrid methodology combining CFD numerical simulations and a series of experimental measurements with high-resolution dilatometer. Transient 3D CFD simulations validated by experimental temperature …
-
Non-metallic inclusions in electroslag refined ingots
… chemical composition of inclusions in refined ingots are more strongly influenced by the deoxidation practice than by the electrode or the slag composition in low Si0₂ content slags. The precipitation of complex Al-Ca-Si inclusions is predictable in high silica slags (>10.0 wt%) and the most …
-
Heat flow in consumable electrode remelted ingots
… in cylindrical consumable electrode remelted ingots. The model simulates both the solidification and ingot growth processes, and incorporates temperature-dependent thermophysical properties and boundary conditions. An accompanying model has also been developed for the slag in the electroslag …
-
Hot tearing predictions in direct chill cast aluminum AA5182 ingots
… criteria validation can now be investigated in ingots of rectangular cross-section using the temperature, stress, and strain fields predicted by this process model. Two hot tearing criteria have been implemented into the DC ingot casting model: Pellini's Total Strain criterion, in which the …
-
Studies of segregation leading to blowhole formation in steel ingots.
… and nitrogen in promoting blowholes in steel ingots.
-
Fluid Flow, Heat Flow and Macrosegregation in Axi-Symmetric Ingots
… for macrosegregation in the "mushy" zone of ingots solidifying under axi-symmetric conditions. Experiments on both a low-temperature simulated ESR apparatus and on a 200mm ESR ingot mold verify the solidification model.
-
Mathematical modeling of electron beam cold hearth casting of titanium alloy ingots
… the refining of titanium alloys and casting of ingots. The main challenges associated with the final phase of the casting process are the formation of macroscopic shrinkage voids and evaporative losses of alloying elements in the top portion of the ingots. The purpose of the current work is to …
-
Determination of optimal forging conditions for void elimination in large steel ingots
… the casting and solidification of large size ingots. Their mechanical closure is generally achieved during the initial deformation of a hot forming process. The present work focuses on the determination of optimal forging conditions for void elimination in large steel ingots with respect to …
-
Investigation of panel crack formation in steel ingots using mathematical and physical models
… investigation of panel crack formation in steel ingots was undertaken to improve understanding of the mechanisms by which they develop and to evaluate possible solutions to the problem. The investigation revealed that two distinct types of panel cracks, both of which are partly caused by …
-
Diamond Coated Wire Cutting of Solar Si Ingots: New Insights Using Raman Microspectroscopy
… technique for rapid wafering of solar Si ingots. However, the root causes for cutting efficiency losses are unknown. One approach to understanding this complex process is to study 1) diamond particles on diamond coated wire (DCW) and 2) Si swarf collected during cutting process. In this …
-
Cutting Efficiency of Diamond Burs on Yttria-Stabilized Zirconia and Lithium Disilicate Ingots
The purpose of this in vitro study was to assess the cutting efficiency of diamond burs on Y-TZP Zirconia as measured by heat generation during cutting; time needed to cut 4 mm of an ingot shaped specimen; and material lost after cutting compared to a Lithium Disilicate control. Forty six cuts of …
-
Modeling of aluminum evaporation during electron beam cold hearth melting of titanium alloy ingots
… sponge material into high quality titanium alloy ingots. Unlike other consolidation processes for titanium, EBCHM is efficient in removing both high and low density inclusions. During the final stage of casting in EBCHM, operators must balance the potential to form large shrinkage voids, caused by …
-
Effects of hydrogen in an aluminium-magnesium-silicon alloy during the production of extrusion ingots
… in aluminium-magnesium-silicon alloy extrusion ingots, has been studied throughout the course of manufacture from freshly reduced aluminium. It is shown that hydrogen in the liquid metal is produced by temperature-dependent reaction between the metal and water vapour in the atmosphere. As the …
-
Influence of casting process parameters on macrosegregation in large size steel ingots using experimentation and simulation
The present project aims to develop a reliable numerical model to predict the extent and severity of macrosegregation in a 40MT (metric ton) medium-carbon high strength steel ingot as a function of casting parameters with the view to minimize the occurrence of the macro-scale defect. For this …
-
Oxhide ingots, copper production, and the mediterranean trade in copper and other metals in the bronze age
… are common finds from the period, ancient metal ingots and hoards of scrap metal, as well as archaeological evidence of metallurgical activities, are often more important sources of information for how ancient technology and trade functioned. Shipwrecks, particularly those found off the coast of …
-
Measurement of primary region heat transfer in horizontal direct chill continuous casting of aluminum alloy re-melt ingots
… of HDC casting of aluminum foundry alloy re-melt ingots. Characterization of the heat transfer conditions present in the process is essential to accurate model development. In this study, the heat transfer conditions in the primary cooling region of an HDC casting machine were characterized using …
-
Pseudo-plastically coupled wrinkling phenomena to explain "vertical fold" surface defects in direct chill casting of Al-Mg4.5-Mn0.3 ingots
Includes bibliographical references (pages 241-254).
Page 1 of 9