Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 40 for “"INTERFACE CRACK"”.
-
A Study of Interface Crack Branching in Dissimilar Anisotropic Bimaterial Composites Including Thermal
The interface crack branching phenomena, including thermal effects, has been investigated by using complex variable method and Stroh's dislocation theory, extended to thermo-elasticity in matrix notation. As one of the most catastrophic failure modes in structures like laminated and sandwich …
-
Effect of Voids on the Crack Kinking in Single Lap Joints
… effect of voids on the energy release rate of interface crack has been studied before; however none of the studies investigated the effect of voids on the kinking of a crack from the interface into the adhesive film. In the following report, a parametric study is conducted to understand the …
-
Analysis of interface and subinterface cracks with crack-face contact and interface shear yield zones
Plane strain problems for an interface crack, with two interface shear yield zones and one crack-face contact zone, and for a crack parallel to an interface between dissimilar materials, with crack-face contact zone near one of the crack tips, are studied. These interface crack and subinterface …
-
On Coating Durability of Polymer Coated Sheet Metal under Plastic Deformation
… An analytical model based on a virtual interface crack concept was developed to indicate the adhesion potential of the coating-substrate interface. From interfacial fracture mechanics, the initial adhesion potential is defined as the energy release rate characterized by the virtual …
-
Study of composite interface strength and crack growth monitoring using carbon nanotubes
Interface strength of woven fabric composite layers was studied using Mode II fracture strength testing. Both carbon fiber and glass fiber composites were used with the vinyl ester resin. First, the single-step cured (i.e., co-cured) composite interface strength was compared to that of the two-step …
-
Fracture analysis of debonding mechanism for FRP plates
Inevitable flaws in the concrete-FRP interface govern plate debonding, and are not amenable to finite element analysis because the models require far more detail than will ever be available for the interface. This thesis describes a global-energy-balance based fracture-mechanics model for the …
-
Micromechanics characterization of sublaminate damage
… is also modified to facilitate the study of an interface crack in a bimaterial system and the thermal and moisture effects. The two-dimensional constitutive equations for an orthotropic linear elastic material are used to represent the stress-displacement relations. The governing equations arc …
-
Study of Interfacial Crack Propagation in Flip Chip Assemblies with Nano-filled Underfill Materials
… fracture toughness for NFU-SiN interface has been determined. In addition to such monotonic interfacial fracture characterization, the interface crack propagation under thermo-mechanical fatigue loading has been experimentally characterized, and a model for fatigue interface …
-
NUMERICAL SOLUTIONS FOR FINITE STRAIN CRACK TIP FIELDS IN SOFT INCOMPRESSIBLE SOLIDS
… concerns itself with problems involving cracks under finite deformation in incompressible hyperelastic materials with special application to soft materials. The main focus is on using numerical methods, in particular the finite element method (FEM), to find the solution of crack tip …
-
Simplified micromechanical models for analysis of interface debonding in a fibrous composite
… simplified micromechanical models to analyze the interface debonding between fiber and the matrix materials. Both analytical and simplified finite element models are used to predict the effective transverse elastic modules of fibrous composites with a partial interface crack based on the material …
-
Investigation of static interfacial fracture in orthotropic-orthotropic composite bimaterials using photoelasticity
… loading on orthotropic-orthotropic bimaterial interface cracks and isotropic-orthotropic bimaterial interface cracks has been investigated using the experimental technique of transmission photoelasticity. For successful implementation of this experimental technique a transparent and …
-
Nondestructive evalu[a]tion and mechanical behavior of continuous fiber reinforced ceramic matrix composites (CFCCs)
… with some energy-dissipating mechanisms, such as crack deflection, debonding at the fiber-matrix interface, crack bridging, and fiber pullout, etc. In order to encourage wide applications of CFCCs, such as Nicalon(TM)/SiC, Nextel(TM)/Blackglas(TM), and Nicalon(TM)/CAS systems, nondestructive …
-
Efficient Simulation of Crack Propagation in Adhesive Bonds
… yet computationally affordable modelling of interface crack propagation is required for the development and certification of large bonded assemblies. Conventional cohesive zone modelling (CZM) resolves the fracture process zone (FPZ) with traction–separation laws that typically require …
-
Peridynamic Modeling and Extending the Concept to Peri-Ultrasound Modeling
… found to be a good simulation tool for handling crack propagation modeling, in particular when multiple cracks grow simultaneously. The developed peri-ultrasound modeling tool has been used to model the ultrasonic response at the interface of two materials in presence of an interface crack. Also, …
-
Solutions of some elastodynamic problems with application to crack propagation
… that will be applicable to the investigation of crack growth and to non-destructive evaluation. A number of problems of dynamic crack propagation in brittle solids are solved by applying the Smirnov and Sobolev method of self-similar potentials and extending the method in several ways. The method …
-
Characterization of Interfacial Mechanical Properties Using Wedge Indentation Method
… hypothetical operations of indentation-induced interface delamination introduced by Marshall and Evans, the analytical solution for interface toughness in terms of strain energy release rate is derived, where the indentation induced stress is found to be linearly proportional to the volume ratio …
-
A fully physically based explanation of the scale effect in composites
… concepts of Finite Fracture Mechanics and Interface Crack Fracture Mechanics are used, without the need to use properties of difficult interpretations or fitting parameters. The numerical tool used is the Boundary Elements Method and models representing the micro level (fibre and matrix) …
-
A Photoelastic Investigation into the Effects of Cracks and Boundary Conditions on Stress Intensity Factors in Bonded Specimens
An investigation into the influence of cracks in bonded specimens is conducted. Photoelastic specimens containing a bondline are subjected to a constant displacement boundary condition created by bonded end grips. Specimens containing various crack orientations are analyzed to determine stress …
-
Dynamic delamination of patterned thin films
… fracture toughness of the thin film/substrate interface. The testing method involves using a laser-induced acoustic stress wave to load the film/substrate fracture plane in tension at very high strain rate (~10^7/s) leading to the inertia-driven interface delamination. A weak adhesive layer is …
Page 1 of 2