Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 88 for “"INTERFACE STRENGTH"”.

  1. Interface Strength of Piles Embedded in Frozen Soils

    … were conducted to determine the adfreeze bond strength of an interface between the Cornwall sand and a galvanized steel plate. These tests were done using a conventional direct shear apparatus. In order to conduct interface tests under freezing temperatures, some modifications were made on the …

    ottawa-retro Repository record for Interface Strength of Piles Embedded in Frozen Soils (opens in a new tab)

  2. Interface strength of various geosynthetics and soils from ring shear tests

    Interface strength is one of the major parameters controlling geotechnical constructions that incorporate geosynthetics. However there are, at the time of writing, few data on the interface strength of various geosynthetics with soils. On occasion, slope failures have been attributed to a lack of …

    ubc Repository record for Interface strength of various geosynthetics and soils from ring shear tests (opens in a new tab) Download PDF for Interface strength of various geosynthetics and soils from ring shear tests (opens in a new tab)

  3. Study of composite interface strength and crack growth monitoring using carbon nanotubes

    Interface strength of woven fabric composite layers was studied using Mode II fracture strength testing. Both carbon fiber and glass fiber composites were used with the vinyl ester resin. First, the single-step cured (i.e., co-cured) composite interface strength was compared to that of the two-step …

    nps Repository record for Study of composite interface strength and crack growth monitoring using carbon nanotubes (opens in a new tab)

  4. The enhancement of composite scarf joint interface strength through carbon nanotube reinforcement

    … the dispersion of carbon nanotubes along the interface of the composite joint. The study examines various factors that may affect carbon nanotube reinforced joint interface strength. Each composite joint consists of a vinyl-ester matrix base, DERAKANE 510-A, interlaced with a carbon fiber …

    nps Repository record for The enhancement of composite scarf joint interface strength through carbon nanotube reinforcement (opens in a new tab)

  5. Drained residual shear and interface strength of soils at low effective normal stress

    The drained residual shear strength at the interface between soils and solid materials can be of importance in evaluating the stability of geotechnical structures. Drained residual shear tests have been performed at relatively high effective normal stress levels, over 50 kPa. These effective normal …

    texas Repository record for Drained residual shear and interface strength of soils at low effective normal stress (opens in a new tab)

  6. A STUDY ON UNSATURATED SOIL-GEOTEXTILE INTERFACE STRENGTH USING MULTI-SCALE LABORATORY TESTS

    The performance of marginal soils and their interface with geosynthetic reinforcement can be complex under construction or service loading conditions and may include excessive deformations and loss of strength as a result of wetting. Therefore, design procedures for reinforced soil structures need …

    oklahoma-thes Repository record for A STUDY ON UNSATURATED SOIL-GEOTEXTILE INTERFACE STRENGTH USING MULTI-SCALE LABORATORY TESTS (opens in a new tab) Restricted access

  7. Lubrication mechanisms and their influence on interface strength during installation of subsurface pipes

    … frictional resistance generated at the pipe-soil interface. Even though lubrication is widely utilized, there is not a clear understanding of the conditions required to obtain the full benefit of lubrication. This dissertation focuses on bentonite slurry characteristics and interface behavior …

    gatech Repository record for Lubrication mechanisms and their influence on interface strength during installation of subsurface pipes (opens in a new tab)

  8. Evaluation of drained residual interface strength between silty/dry sand & various surfaces at low effective stresses

    … this study is to investigate how a sand-surface interface behaves under low effective stresses. The main objectives of this study are to- (1) record the peak and residual interface friction between sandy soils and different interfaces using tilt-table apparatus; (2) observe whether different …

    texas Repository record for Evaluation of drained residual interface strength between silty/dry sand & various surfaces at low effective stresses (opens in a new tab)

  9. MODELING OF INTERFACE STRENGTH AS WELL AS INTERFACE DEFORMATION BASED ON NANOMECHANICS AND DEVELOPMENT OF INTERFACE DATABASE SYSTEMS

    … focus on the shear deformation that occurs in interfaces of such materials when overall three-dimensional hierarchy is subjected to mechanical loading. In order to predict the interface stress magnitude in such systems during deformation, steered molecular dynamics simulations are performed to …

    purdue-thes Repository record for MODELING OF INTERFACE STRENGTH AS WELL AS INTERFACE DEFORMATION BASED ON NANOMECHANICS AND DEVELOPMENT OF INTERFACE DATABASE SYSTEMS (opens in a new tab)

  10. A Simulation By Using Cohesive Zone Model For Indentation Test In Thin-Film/Substrate Systems

    … thesis presents finite element simulation of interface adhesion properties and interfacial delamination cracking processes of thin film systems during indentation experiments using wedge-shape indenters. The cohesive zone model based on traction separation law (T-S) is employed during the FEM …

    nus Repository record for A Simulation By Using Cohesive Zone Model For Indentation Test In Thin-Film/Substrate Systems (opens in a new tab) Download file for A Simulation By Using Cohesive Zone Model For Indentation Test In Thin-Film/Substrate Systems (opens in a new tab)

  11. Bond strength of cementitious borehole plugs in welded tuff.

    … includes a systematic investigation of the bond strength of cementitious borehole plugs in welded tuff. Analytical and numerical analysis of borehole plug-rock stress transfer mechanics is performed. The interface strength and deformation are studied as a function of Young's modulus ratio of plug …

    arizona-thes Repository record for Bond strength of cementitious borehole plugs in welded tuff. (opens in a new tab)

  12. Electro-chemo-mechanics of the interfaces in 2d-3d heterostructure electrodes

    … electronic contact. Therefore, the binding strength between both materials is crucial for the success of such electrodes. Furthermore, battery cycles may bring about phase transformations in the active electrodes. Thus, altering the characteristics of its existing interface with the 2D …

    njit Repository record for Electro-chemo-mechanics of the interfaces in 2d-3d heterostructure electrodes (opens in a new tab)

  13. Strength of rough interfaces: A micro-scale approach to steel-epoxy and composite systems

    … is highly dependent on the performance of interfaces. This thesis studies the mechanical strength of planar interfaces and focuses on the effects of microscopic roughness. The first part of the thesis concentrates on a stainless steel-epoxy bi-material. The effect of the preparation at an …

    aalto Repository record for Strength of rough interfaces: A micro-scale approach to steel-epoxy and composite systems (opens in a new tab)

  14. Design of Improved Ceramic/polymeric Composites

    … for glass fiber/epoxy matrix composites. This interface consisted of a thin coating of activated carbon (ACI) with high surface area to take advantage of mechanical interlocking. Furthermore, the surface chemistry was modified to provide varying degrees of bonding to the resin. These ACI …

    uiuc Repository record for Design of Improved Ceramic/polymeric Composites (opens in a new tab)

  15. Modeling competing fracture for dry transfer of thin films to a flexible substrate

    … and mode-mix as a function of material and interface properties. Competing fracture during the transfer of a 2D material like graphene is simulated with finite element models in ABAQUS®. Two damage initiation criteria are used with cohesive zone models. Interface strength is observed to be …

    texas Repository record for Modeling competing fracture for dry transfer of thin films to a flexible substrate (opens in a new tab)

Page 1 of 5