Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 34 for “"INTERFACIAL FRACTURE TOUGHNESS"”.
-
Experimental investigation of the interfacial fracture toughness in organic photovoltaics
… chemical vapor deposition (PECVD) and the interfacial fracture toughness (Gc, J/m2) between the SiNx and PMMA were quantified. The fundamentals of the adhesion at these interfaces and methods to increase the adhesion were investigated. In addition, we investigated the adhesive/cohesive …
-
Effect of bleaching agent on interfacial fracture toughness of resin composite-dentin interfaces
The effect of bleaching on fracture toughness (KIC) of existing composite-dentin interfaces was assessed using the notchless triangular prism (NTP) specimen fracture toughness test. Human molars and premolars (<6 months old) were wet ground on 600 SiC to obtain 4x4x4x4mm triangular prisms with …
-
Experimental measurements of thermal barrier coating interfacial fracture toughness as a function of mode-mix
… knowledge of the experimentally measured interfacial fracture toughness over a range of mode mix and especially at mode-II. Previously no reliable test method had been employed to evaluate these properties under pure mode-II conditions, which are most representative of critical TBC spall …
-
Adhesion Strength of Cordierite Bulk Coatings on Molybdenum Substrates
… because of ease in testing and availability of fracture mechanics interpretations of test data. The interfacial fracture toughness was determined from indentation load vs. crack length data by examining the residual stress and critical buckling load of the ceramic coatings. The interfacial …
-
Experimental and Computational Study on Fracture Mechanics of Multilayered Structures
… they contain defects or cracks. Enhancing their fracture properties is therefore critical to improve the reliability of the systems. The interface-dominated fracture mechanics of multilayered structure was studied using experiments and finite element (FE) modeling by considering two examples: …
-
Moisture and Interfacial Adhesion in Microelectronic Assemblies
… science of moisture-induced degradation of interfacial adhesion. The research is comprised of both experimental and modeling components of analysis and consists of four primary components. First, the moisture transport behavior within underfill adhesives is experimentally characterized and …
-
Mechanochemical activation at solid interfaces
… at the molecular level and macroscopic interfacial fracture toughness at SAM-modified interfaces. Characterization and application of surface chemistry changes resulting from activation of force-sensitive mechanophore modified interfaces remains largely unexplored. In this dissertation, …
-
HYGROTHERMALLY-INDUCED DELAMINATION AND CRACKING IN PLASTIC IC PACKAGES
… may exist in bonded interfaces. These small interfacial defects induce very high stress concentrations around the defects leading to debonding and delamination growth. If the total stress intensity factor generated by the loading due to the hygrothermal stresses and steam pressure is higher …
-
Interfacial fracture of micro thin film interconnects under monotonic and cyclic loading
… techniques to quantitatively study the interfacial fracture of micro-contact thin film interconnects used in microelectronic applications under monotonic and cyclic loadings. The micro-contact spring is a new technology that is based on physical vapor deposited thin film cantilevers with …
-
Modelling the Effects of Element Doping and Temperature Cycling on the Fracture Toughness of β-NiAl / α-Al2O3 Interfaces in Gas Turbine Engines
… of how elemental additions affect the interfacial fracture toughness of thermal barrier coatings at the bond coat/thermally grown oxide interface in gas turbines. These turbines are exposed to cyclical thermal loading, therefore a simulation was designed to model this interface in a …
-
Quantitative and consistent tests for interlayer adhesion in laminated glass
… drilled compression (DCDC) for determining the toughness of glass/PVB interfaces has been examined. Experiments were conducted on two different types of samples: low and high adhesion. Stress and fracture analysis was conducted using the finite element method. The numerical analysis was first …
-
Nanotribological and Nanomechanical Investigation of Nanomaterials
… primarily documents the quantification of the interfacial behavior of carbon based nanomaterials, which includes two categories, one is the nanofriction properties evaluation of aligned carbon nanotube carpets, few-layer graphene as well as three types of functionalized graphene nanoribbons, …
-
Influência do tratamento de superfície na qualidade adesiva da interface de cerâmica Y-TZP com cimento resinoso
… modify the zirconia surface resulting in higher interfacial fracture toughness. After sintering, the CAD/CAM Y-TZP was subjected to 5 different surface treatments consisting of no treatment group (G1), SIE followed by hydrofluoric acid treatment (G2), heat treated at 750 °C (G3), hydrofluoric …
-
Measurements of interface thickness of two dissimilar materials: numerical and experimental verification
<p>Interfaces and interfacial properties have been the focus of academic and industrial research for several decades. Research shows that the interfacial fracture toughness and the adhesion strength of two dissimilar materials are governed by the interface thickness. In this study, a new testing …
-
Role of contamination on the bondline integrity of composite structures
… for initial screening is used to predict the interfacial fracture characteristics after exposure to contamination. It is found the adhesive modulus and stiffness dropped by up to 10% for the hydraulic fluid contaminates, suggesting increase of the plastic dissipation within the bondline. …
-
Stiffness-Driven Design and Interface Debonding Study of FRP Sandwich Structures for Bridges
… proper modifications could be used to measure interfacial fracture toughness at different mixed-mode ratios. Recommendations concerning experimental setups and the data reduction method associated with TSD tests were also suggested in this study.</p>
-
In vitro Investigation of Mechanical Properties of Latest-Generation CAD-CAM Composites
… (CAD-CAM) materials for dental prostheses: fractures and debonding from titanium implant abutment (Ti-base). Specifically, the work focused on evaluating the mechanical performance of latest generation CAD-CAM composites compared to established lithium-based glass-ceramic material. Fatigue …
-
Diblock carbon nanotubes compatibilized immiscible polymer blends
… an expensive process. To solve the problem, interfacial agents are used to improve the miscibility between different plastics. The present dissertation summarizes experiments conducted to evaluate the suitability of carbon nanotubes as compatibilizers for immiscible polymer blends. Nanotubes …
Page 1 of 2