Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 94 for “"INTERFACIAL STRENGTH"”.
-
Interfacial strength development in thermoplastic resins and fiber-reinforced thermoplastic composites
… that could be used to characterize autohesive strength development in amorphous thermoplastic resins and fiber-reinforced thermoplastic prepregs. All tests were performed using polysulfone P1700 thermoplastic resin and AS4/P1700 graphite-polysulfone prepreg. Two test methods were examined to …
-
Effect of surface treatments on interfacial strength and durability of metal-polymer composite bond
Effect of surface treatments on Strength and durability of aluminum 6061-Henkel Hysol EA 9891RP (room temperature curing epoxy) bond was studied using single lap shear, flatwise tensile and wedge crack test. The interfacial strength (IFSS) and % cohesive fracture varied with composite adhesive …
-
Investigating the Effect of Thermal Stresses on the Hollow Glass Microsphere/Polyester Composites Interfacial strength by Acoustic Emission Method
The effect of coatings on the interfacial strength of a hollow glass microsphere/polyester composite and their capacity to endure thermal stresses were studied by mechanical testing and an active Acoustic Emission (AE) method. AE was postulated to provide more local information at or near the …
-
Evaluation of Osseointegration Between Two Different Modalities of Hydroxyapatite Implant Surface Coatings: Plasma Sprayed HA Coated Implants and Electrophoresis Deposited Nano HA Coated Implants
… The quantity of osseointegration was inferred by interfacial strength and percent tissue-contact length.Materials and Methods: Thirty-six cylindrical implants (18 PS and 18 EPD) were placed into dog mandibles. Nine implants from each group were evaluated with pull out testing and histological …
-
Development of an enhanced microstructure–level machining model for carbon nanotube reinforced polymer composites using cohesive zone interface
… and the polymer phase, thereby assuming perfect interfacial bonding. However, subsequent experimental investigations revealed that the failure mechanism during machining is primarily governed by the CNT–polymer interface. Since the strength of the CNT–polymer interface is critical to the load …
-
Nanoscale Mechanical Characterization of Graphene/Polymer Nanocomposites using Atomic Force Microscopy.
… specifically the graphene/polymer interfacial strength and the stress transfer at the interface.;Two novel methods to directly characterize the interfacial strength between individual graphene sheets and polymers using AFM are presented and applied to a series of polymers and …
-
An investigation of the interfacial characteristics of nitinol fibers in a thermoset composite
… many material properties, including the interfacial shear strength between the embedded sensor or actuator and the matrix must be thoroughly understood.. Investigations were performed in order to examine the effects of different variables on the interfacial characteristics between a …
-
MnO2 Nanoscale Interface Modification
… modification and carbon fiber is crucial to the interfacial strength of the resulting hybrid composite interfaces. This adhesion strength can be studied using nanoscratch to find the force needed to cause delamination of the nano-modification. This work will report on the nanoscratch tests on …
-
A Mechanical and Histological Study of Functionally Graded Hydroxyapatite Implant Coatings
… two for histological evaluation. To evaluate the interfacial strength of the implants at the bone-implant interface, push-out test were performed. The evaluation of the bone response to implant was done using histological analysis.At three weeks following implantation, there was no significant …
-
Thin -Film Adhesion Measurement by Laser -Induced Stress Waves
… conditions is observed and the mixed-mode interfacial strength is measured and compared with the tensile case.
-
Tensile Fracture Mechanisms of Ferritic/martensitic Structural Materials
… association between critical stress and critical interfacial strength, but also offer a new method to determine the true strain/stress behavior during deformation. This method is called the Universal Micro-structural Geometry-corrected Model (UMGM) in this dissertation. Due to the development of …
-
EXPERIMENTAL CHARACTERIZATION OF ELASTIC STIFFNESS AND DELAMINATION TOUGHNESS IN THERMAL BARRIER COATING SYSTEMS
… (CED) tests were used to measure the Mode II interfacial toughness of two TBCs. GE’s standard diffusion aluminide bond coat/yttria stabilized zirconia (YSZ) topcoat TBC system was characterized at various stages of gradient thermal cycle life and compared to previous results for furnace cycled …
-
Entanglements in Large Deformation and Mechanical Failure of Glassy Polymers
… results for the relation between structure and strength are discussed with emphasis on the role of entanglements. We first present two studies regarding bulk polymer glasses. The first examines the effects of the prestrain, both parallel and perpendicular to the subsequent deformation direction, …
-
MICROMECHANICS AND MICROSTRUCTURE OF IMPACT-INDUCED BONDING IN METALS
… the bonding mechanisms and the resulting interfacial properties remain elusive. Addressing these open questions is the focus of this dissertation.First, fracture modalities of metallic particle surface oxide layer under compressive loading were resolved. Three distinct modalities, …
-
Synthesis and characterization of graphene-palladium thin film composites for nano-gilding
… properties of synthesized graphene and a strong interfacial strength between them. To the end of synthesizing useful graphene-based composites, chemical vapor deposition (CVD) growth of graphene on thin palladium leaves is studied for the potential of nano-gilding based coating of surfaces for …
-
Rate-dependent fracture of a silicon/epoxy interface under mixed-mode loading conditions
… many polymer-based interfaces, where both the interfacial strength and adhesion energy (or fracture toughness) often increase with increasing separation rates, while the opposite trend typically defines the behavior of the bulk polymer. This dissertation mainly addresses the following two …
-
Material Formulation and Process Optimization Towards Fabricating Robust 3D Printed Structures
… layers of structures printed from PEEK was strengthened through a combination of low-molecular weight additive incorporation and post-printing thermal annealing. Chapter III reports a method for decreasing the irreversible thermal strain of structures printed from poly(lactic acid) by …
Page 1 of 5