Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 58 for “"INTERLAMINAR FRACTURE TOUGHNESS"”.
-
Interlaminar fracture toughness of a quasi-3D composite
… Traditional laminates have relatively weak interlaminar strength and are prone to delamination, and this is especially the case when a delamination crack already exists. Quasi-3D (Q3D) braided composites seek to solve this issue by weaving the bias tows around the axial tows of the adjacent …
-
Interlaminar fracture toughness of layered materials under fatigue loading conditions
In the present thesis, the mode I and II fatigue fracture performance of a novel group of Titanium/CFRP adhesive joints is investigated. The framework is set by the need to characterize the fatigue behavior of this new group of Ti/CFRP adhesive joint. The adhesive joints under study are composed of …
-
Interlaminar fracture toughness of layered materials under high-speed loading conditions
This thesis delves into the fracture toughness of composite laminates and adhesive joints under high-speed loading conditions, with a particular focus on the elastic vibrations of the specimen during testing. It develops analytical tools for calculating dynamic fracture toughness and for describing …
-
Mode I and mode II interlaminar fracture toughness simulation of unidirectional and quasi-three-dimensional composites
… through-thickness direction. Due to their low interlaminar strength, composites are prone to delamination. The quasi-three-dimensional (Q3D) composite are designed to improve the interlaminar strength. In this work, the Q3D composite is made by a special braiding process in which the bias tows …
-
Out of autoclave manufacturing of CFRPs having multiscale reinforcement for improved interlaminar fracture toughness and multifunctional characteristics
… Additionally, their lowpolymer matrix toughness leads to interlaminar failures such as delamination. Delaminations as a primary failure mode are resulted either from fatigue loadings or low velocity impact which are caused by the extension of multiple matrix cracks. Therefore, …
-
Effect of Clay Addition on Mode II Interlaminar Fracture Toughness and Flexural Fatigue Behavior of Glass/Epoxy Composites
… to study the effect of clay addition on Mode II interlaminar fracture toughness and flexural fatigue behavior of glass/epoxy composites. Nanoclay was dispersed in epoxy resin by a high speed homogenizer. Then, hand lay-up and autoclave curing were used to fabricate S-glass/epoxy/nanoclay …
-
INVESTIGATION OF THE EFFECT OF THE 2.5-D CARBON FABRIC CONSTRUCTION ON FABRIC REINFORCED POLYMER MATRIX COMPOSITE TOUGHNESS
… FABRIC REINFORCED COMPOSITES HAVE A BETTER INTERLAMINAR FRACTURE TOUGHNESS AND SUPERIOR IMPACT BEHAVIOUR TO THEIR UNIDIRECTIONAL COUNTERPARTS IS THE MAIN GOAL OF THIS STUDY. THE RELATION BETWEEN FABRIC CHARACTERISTICS AND INTERLAMINAR FRACTURE TOUGHNESS IS SOUGHT, USING A PLAIN-WEAVE FABRIC …
-
The Comparison of Composite Aircraft Field Repair Method (CAFRM) with Traditional Aircraft Repair Technologies
… acid digestion, short beam shear, and mode I fracture tests. The researcher was able to determine the specimen's void content, fiber volume fraction, shear strength, and opening mode interlaminar fracture toughness for the specimens fabricated using the different repair methods. The specimens …
-
A characterization of the interfacial and interlaminar properties of carbon nanotube modified carbon fiber/epoxy composites
… nanotube (CNT) coated carbon fibers and the interlaminar fracture toughness of woven fabric carbon fiber/epoxy composites toughened with CNT/epoxy interleave films is presented. The deposition of multiwalled carbon nanotubes (MWCNT) onto the surface of carbon fibers through thermal chemical …
-
Effect of Direct Deposition of Dry Particle Tougheners on the Processability and Forming Quality of Carbon Fibre Epoxy
… microparticles particles is a cost-effective interlaminar toughening method. However, most previous studies have mainly focused on their toughening effect and mechanisms, their impact on the processability of composites has not been well investigated yet. <br/>In this work, a method of …
-
Design, Analysis, Manufacturing, and Testing of Ceramic and Polymer Matrix Nanocomposites
… carbon nanotube Nanoforest II, HA-CNT-NF-II, on interlaminar fracture toughness of prepreg carbon fiber laminates have been investigated and reported. The CNTs included in these samples were synthesized using Chemical Vapor Deposition (CVD) furnace, on steel substrate. The CNT-NF-II layers were …
-
Improving the delamination bridging behaviour of z-pins through material solutions
… made with a highly ductile matrix provide a peak interlaminar fracture toughness of the order of 40 kJ/m2, compared to the 28 kJ/m2 yielded by commercial CF/BMI Z-pins. Moreover, the transition from full pull-out to rupture occurs at a mode-mixity of 0.55, whereas BMI Z-pins start failing at a …
-
Processing and Characterization of Carbon Nanotubes Reinforced Epoxy Resin Based Multi-scale Multi-functional Composites
… composite laminate properties, such as, interlaminar shear strength, interlaminar fracture toughness and electrical conductivity along with studying the micro and nano-scale interactions of carbon nanotubes with epoxy matrix via thermomechanical and electrical characterization of …
-
Cellulose Nanocrystal Reinforced Electrospun Composite Nanofibres
… interleave layers with the aim of improving the interlaminar fracture toughness (IFT) (mode I and mode II) of an epoxy/carbon laminate composite. The effect of the nanofibre orientation (0° and 90° relative to crack direction) within the interleave, the CNCs volume fraction, the type of CNC, and …
-
QUASI-STATIC AND IMPACT CHARATERIZATIONS OF STITCHED FLAX FIBER COMPOSITE
… behavior, damage development, and impact fracture resistance. The results of this study show that flax-yarn stitching is a promising technique to enhance the interlaminar fracture toughness of flax/epoxy composites. However, it facilitates the propagation of in-plane cracks, resulting in a …
-
Modeling and testing of stitched composite laminates for enhanced interlaminar strength
… percent, while it enhances the opening Mode I interlaminar fracture toughness. This degradation in the effective in-plane stiffness is attributed to the localized damage inflicted on the fiber plies by the needle penetration of the sewing machine used to insert the transversely reinforcing …
-
Towards the development of novel self-sensing and self-healing methodologies in polymer matrix composites
… advanced FRP composites centers around the poor interlaminar fracture toughness that may lead to undetected damage within the microstructure deteriorating the mechanical performance. The purpose of the present work unfolds in two axes, (i) to develop a novel Non- Destructive Evaluation technique …
-
Mechanical Properties of Nanomodified Hybrid GFRP Composite Materials
… configurations on the neat GFRP laminate, mode I interlaminar fracture toughness, tensile, and vibration properties were investigated. Electron microscopy testing techniques were used to support the results and conclusions. The addition of the filler material showed significant improvement in the …
-
Applications of advanced imaging and simulation methods in analysing delamination fracture in fibre reinforced composite materials.
The Mode I interlaminar fracture toughness plays a key role in improving the impact resistance of carbon fibre reinforced polymer composites due to the contribution of damage response mechanisms determined in part by the relative competition between interlaminar and intralaminar crack paths. In …
-
An Investigation Into the Properties and Fabrication Methods of Thermoplastic Composites
… Tensile, compressive, and Mode I interlaminar fracture toughness tests were conducted to analyze mechanical properties of these advanced thermoplastics. Several fabrication processes were also tested to determine optimal consolidation and aesthetic appearance of structural members. …
Page 1 of 3